There is no need to rerun the initconfig target if the current project
directory has already been configured.
Change-Id: Ifaf01d8afa88f058bd4e20ed7c3fe136dbb1a640
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
To support multiple versions of the compilation tools GCC etal the
original Kbuild would execute the tool to ascertain if the argument
being added to command line was compatible with the version of the
tool installed on the system. This causes significant overhead and is
not required since we specify the minimum version of the tools
required for the build.
Change-Id: I23d811bee9e89bf7549449c679adbfa02efd94de
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Fixes missing qemu flag and when adding Bluetooth -serial switch it
became the first UART.
Change-Id: I85f4bf236383a288f2935f6455141fa7b18c3ac8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use patches qemu binary provided by the Yocto SDK.
Change-Id: I5edc2338f45fdd0d953d8d34bea648d0d18d8bf8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Board specific headers should be included conditionally based
on the selected BSP.
Change-Id: Ia8c32c56e94670f4c59f7acac28557dd178e44f1
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
The in-code Documentation Guidelines contains the best practices for
documenting code using Doxygen. The guidelines offer options for both
novice and expert developers to document their code in a compatible and
correct manner.
Fully marked and simplified templates are provided to ease the
documentation effort.
Examples taken directly from Tiny Mountain's code show the difference
clearly.
The .c files contained here are used for the examples only and do not
have any function within Tiny Mountain.
Finally, the doxygen.rst file was updated to include the new content.
Change-Id: I6a39a54feed5fa95f2f21545c3967ff0755d85ae
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
- Extend the scanned files to include nano kernel headers
and source files.
- Add *.s to file pattern
Change-Id: I9d2566344f4a6bcfe0506e233fd6784704b9624e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The disclaimer was added in a separate file keeping the master file
index.rst clean.
The master file was only changed to include the disclaimers.rst file.
Change-Id: I51a56c64dee3285ea3b9be22f0eab477459d8417
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adds the basic kernel objects' documentation describing the function of
tasks, fiber and interrupt service routines.
Adds the nanokernel objects' docuementation describing the function of
the most important nanokernel objects.
Adds the microkernel objects' documentation describing the function of
the most important microkernel objects.
Changes the index.rst file to include the Object Documentation.
Change-Id: Ib35d973cc3575a7ecc32c4ab175e05cb298e3306
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reduces the clutter and let us focus on what really
counts.
Change-Id: I30a245697684a036c6a908e52d77005b35b53d81
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We do not require the host tools anymore. Host tools
are part of the kbuild build system now.
Change-Id: Ib253c1d340bf7a2d0fa9650fad038700f87b00e4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We are moving to timo-env.sh for consistency. This file
should be renamed with the final project name.
Change-Id: I8d3a4a9bc7e0b7f1f52b20d68326f62e0d696dd7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to display PCI devices, make sure console is initialized
and list all the devices.
Change-Id: Ia7f47e58cee1a0da0ee1f86d9229a3e23e7a0dbb
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
UART on Quark platfor, according to Quark BSP Programmer's
Reference Manual, is located in the following order on PCI bus:
COM2 BAR0: 16550 registers
BAR1: DMA registers
COM1 BAR0: 16550 registers
BAR1: DMA registers
So, the driver on Quark platform has to specify BAR (Base
Address Registers) number, the pci_bus_scan() function looks for.
As long as UART is a concole device, calling pci_show() during
it's initialization does not make any output.
Change-Id: I2261fbcc8f9e3ebc22d5307fdcbb18cb649c1224
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Added BAR (Base Address Registers) as a parameter for PCI scan.
Some devices (as UART in Quark) use two set of BARs for different
purposes. A driver may require only one of them.
BARs are numbered from 0 to PCI_MAX_BARS.
PCI_BAR_ANY means ignore the BAR number. Constants are defined
in drivers/pci.h
If device class is not specified as a scanning parameter, and
set to 0, ignore it.
Change-Id: I6b7116c5c6cf9c470ab22bec9eb74842f15b5d99
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In a list, the code blocks were causing the list numbering to restart
after each block, shifting them to the right helps keep the list numbers
right.
Change-Id: I5476114949422e8f917a46b041ee362faf4b81e2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change documentation for usage with kbuild based make system.
Change-Id: I4071d65c3eaf69a91b93e13e71d6f44a12edc317
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Follow linux kernel style and have root Kconfig be arch
specific.
Change-Id: Ic0cfbd91b532b4ac7faa12ed23aebc7ae9f054b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Dirk Brandewie