Recursive make should be invoked as $(MAKE) and not "make" for reasons
documented at
https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html
$(MAKE) is what CMake puts in all the CMakeFiles/Makefile2 it generates,
it doesn't use "make" either.
Issue found thanks to the following warning:
build.log:make[4]: warning: jobserver unavailable: using -j1.
Add '+' to parent make rule.
If CMake is invoked with -GNinja or other then fall back on "make" as
before and pray that it's available.
Fast reproduction with:
make -j2 -C build clean mylib_project VERBOSE=1
Build directories have been compared before/after this change and
there's zero difference except the generated
mylib_project.dir/build.make file (and the warning above) when using
make.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
on non-XIP system, SRAM is the default region, and relocated .data
section and .bss section of SRAM shouldn't be inserted between
_image_rom_start and _image_rom_end, because the memory region between
_image_rom_start and _image_rom_end will construct the mpu ro region.
Also for the newly added memory region on non-XIP system, the
relocated .text secition and .rodata section should also be mpu aligned.
Fixes: #16090.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Currently coverage is enabled only in platforms which dont have
multiple memory regions. This sample was designed to emulate
different memory regions. This in conjunction with gcov which
might instrument data in different memory regions will not work
as expected. Therefore disabling gcov for this sample.
Fixes: GH-15107
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch enables the GPIO driver by default on all boards equipped
with an nRF SoC (all boards having `CONFIG_SOC_FAMILY_NRF=y` in their
`_defconfig` file).
In vast majority of cases the driver is needed, so it is more
convenient to enable it at board level than in particular
applications.
And if the driver is undesired for some reason, it can be still
disabled in the application config.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The current flash configurations for all nRF52840's in Zephyr is
VERY constrained when it comes to allowing samples any space for
storage or custom areas. It only leaves the last 4 pages of flash
for "storage".
The nRF52840 is also capable of using OpenThread which defaults
to using the last 4 pages of flash for storing OpenThread-related
network data.
This means that while using OpenThread under any configuration
designed to use mcuboot partition slots, there is no space left
over for storage of any kind.
Let's adjust the partition table to set storage at 8 pages of
flash (32k). This fixes the conflict with OpenThread and leaves
room for future use cases that may arise.
Signed-off-by: Michael Scott <mike@foundries.io>
As we want to remove dts dependency on Kconfig, we had a case based on
CONFIG_BOOTLOADER_MCUBOOT. From a DTS point of view that was just
getting the chosen property 'zephyr,code-partition' set. We can easily
move this to the actual dts files and remove the mcuboot.overlay.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The test 'samples/application_development/code_relocation' was failing
in master because it was not declaring that it was defining additional
sections.
The CI error is attached below.
This patch fixes the CI failure by declaring in 'sample.yaml' that
these additional sections are expected.
FAILED:
qemu_cortex_m3/samples/application_development/code_relocation/test
has unrecognized binary sections: ['_SRAM2_RODATA_SECTION_NAME',
'_SRAM_TEXT_SECTION_NAME', '_SRAM_RODATA_SECTION_NAME',
'_SRAM_DATA_SECTION_NAME', '_CUSTOM_SECTION_NAME2']
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The options selecting nRF drivers are now enabled by default when
an nRF SoC is selected as the build target.
The options selecting given hardware instances are now enabled at
the board level.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This sample provides an example for using the code relocation
feature. This example will place text,data,bss from 3 files to
various parts in the SRAM. For this a custom linker file is used
which is derived from include/arch/arm/cortex_m/scripts/linker.ld.
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Remove the ifdef related to CONFIG_FS_FLASH_STORAGE_PARTITION. There
shouldn't be any harm in always having the partition around as we'll
just generate the defines related to and most applications will ignore
them.
Helps get one step closer to have DTS not depend on Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This can help find unused symbols. Those end up without a type if
'default' is used instead of 'def_bool', which generates a warning.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
a longer explanation.
Keep the 'def_bool' for the following symbols, which seem to be
deliberately defined only in Kconfig.defconfig files:
- ALTERA_AVALON_I2C
- ALTERA_AVALON_MSGDMA
- ALTERA_AVALON_PIO
- ALTERA_AVALON_QSPI
- ALTERA_AVALON_SYSID
- CLOCK_CONTROL_IMX_CCM
- CPU_EM4_DMIPS
- CPU_EM4_FPUDA
- CPU_EM4_FPUS
- FP_FPU_DA
- I2C_GECKO
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
It is very inconvenient to maintain an application that both runs on a
Zephyr board and an out-of-tree board.
It forces one to write build scripts like this in the app:
if(BOARD STREQUAL my_out_of_tree_board)
set(BOARD_ROOT some/out/of/tree/board/path)
endif()
To avoid this we change the semantics of BOARD_ROOT. Instead of it
being a path to the board root it is now a prioritized list of board
root directories. Zephyr will append ZEPHYR_BASE to BOARD_ROOT.
This ensures that Zephyr boards can be used when the out-of-tree board
directory can not supply the requested board.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_NRF51822_QFAA
CONFIG_SOC_NRF51822_QFAB
CONFIG_SOC_NRF51822_QFAC
CONFIG_SOC_NRF52810_QFAA
CONFIG_SOC_NRF52832_QFAA
CONFIG_SOC_NRF52832_CIAA
CONFIG_SOC_NRF52832_QFAB
CONFIG_SOC_NRF52840_QIAA
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
UART pins (TX, RX, RTS, CTS) are now configured in DTS files.
RTS and CTS definitions are optional. If flow control is enabled
and RTS/CTS pins are not defined, then compiler will issue
an error message.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
I removed GPIO configuration from board files and enabled them
as default in driver Kconfig file. All boards had GPIO ports
enabled that is why I decided to enable it by default.
Power management example was changed to use new driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
CMake has several prototypes/signatures for the function
'target_link_libraries'. This commit migrates the usage of
'target_link_libraries' on Zephyr CMake libraries from the old 'plain'
signature to the new '<PRIVATE|PUBLIC|INTERFACE>' signature.
For technical reasons the two signatures can not be mixed. Each
library must exclusively use either the old or new signature.
The 'old' plain signature is equivalent to using the PUBLIC
signature. Migrating to use 'PUBLIC' is therefore expected to be a
safe change.
After the migration it will be possible to use the PRIVATE and
INTERFACE signatures on Zephyr CMake libraries. This is useful for
instance to fix issue 8438.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The old GCC ARM Embedded website on launchpad
(https://launchpad.net/gcc-arm-embedded) has been superseeded by the new
GNU Arm Embedded one
(https://developer.arm.com/open-source/gnu-toolchain/gnu-rm).
This also means a change of name from "GCC" to "GNU". Reflect this in
the enviroment variables so that the proper term is used henceforth.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds basic support for declaring gpio nodes in dts for nrf52.
The dts.fixup provides mapping for the generated defines to the config
defines currently used by the nrf gpio driver.
Existing boards that use nrf52 are updated.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Gets rid of a warning added in commit 6eabea3a7e ("Kconfiglib: Warn
for unquoted string defaults"), which will soon be an error (because a
simple warning whitelist will be used).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
FS_FLASH_MAP_STORAGE keyword enables the storage partition,
but it was depend on flash_map module which is unused by
NFFS. This patch makes it independent thanks
to it is possible to enable the storage partition
without flash_map module.
FS_FLASH_MAP_STORAGE was renamed to
CONFIG_FS_FLASH_STORAGE_PARTITION
as it is independent for flash_map.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The NFFS partition at the end of flash is also useful for any other
file system or even the Flash Circular Buffer (FCB). Rename the
partition from 'nffs_partition' to 'storage_partition' and make it
depend on a new hidden Kconfig entry which the relevant users will
select (such as NFFS and FCB).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a sample that demonstrates a custom board definition. This proves
that BOARD_ROOT works and can be a useful reference when creating a
custom board definition.
Instead of spending time making up a board, the nrf52840_pca10056
board has been copied as-is. And the hello world sample has been used
as the basis for the application.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
There are currently two samples in the
~/zephyr/samples/application_development/ directory. This commit
allows them to be visible in the documentation.
It is not clear why this has not been done already.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Having a library being GLOBAL, although not default behaviour, or
necessary for the sample, is expected behaviour for a library. It is
expected that like normal libraries, the target name will be
accessible from outside of the CMakeLists.txt file that created it.
Since samples are used as reference code, we specify GLOBAL so that
libraries are created with this intuitive behaviour.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This samples was failing to build with Ninja because Ninja detected
that libmylib.a was missing. Adding it as a BYPRODUCT in the
ExternalProject fixes the issue.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove build_only and add harness type needed for the sample/test to
allow running with sanitycheck and on devices once we have harness
support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Jan Van Winkel