This commit refactors internal functions in arm_mpu.c to use
bitsets and functions taken directly from ARM CMSIS instead of
hardcoded arithmetic literals. In several internal functions
some part of the implementation is abstracted further in inline
functions or convenience macros, to facilitate extending the
arm_mpu.c for ARMv8-M. In addition, the commit adds minor
improvements in internal function documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit abstracts the attribution generation for an MPU
region, determined based on a supplied configuration and the
given size, from the actual implementation, which is placed
in a separate inline function. This allows to have multiple
implementations of attribution generation for different ARM
MPU drivers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors the _region_init(..) internal MPU driver
function so it gets the region index and a struct arm_mpu_region
as aruments. The latter holds the MPU region configuration that
is to be applied to the region determined by the index argument.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enforces conditional compilation of mpu_regions.c
in nrf52/CMakeLists.txt depending on whether ARM_MPU_NRF52X
K-option is defined.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
All the STM32F7 SoCs have a TRNG. Adding support for it is just a matter
of tweaking the #ifdef and including the right file from HAL.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Duplicate the ARM MPU-related registers' definitions
specifically for Beetle SOC which is not compliant with
ARM CMSIS and does not include the ARM CMSIS headers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the redundant HAL definition for the ARM
Cortex-M MPU registers, and modifies the ARM MPU driver
implementation to directly use the provided HAL from CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit refactors arm_core_mpu_configure_user_context() so
it can use directly arm_core_mpu_configure().
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit places all the implementation in arm_mpu.c within
build-time guards, ensuring that it is compiled-in only if the
kernel features requiring MPU are present (i.e. USERSPACE,
APPLICATION_MEMORY, or MPU_STACK_GUARDS). An exception to that
is the code required for MPU initialization, which is left out,
as MPU initialization occurs always if MPU is present.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The STM32F723 has more interrupts than the STM32F746 due to the
additional SDMMC controller. Besides that the changes are very
similar to the ones of the STM32F746.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit updates the compile options in cmake to distinguish
between ARMv8-M Mainline MCUs with or withouth the optional DSP
extension. A new Kconfig option: ARMV8_M_DSP, is introduced, to
signify the use of an ARMv8-M MCU with DSP support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
All chips from nRF51 and nRF52 series support Segger RTT,
so we can enable it if given series is used.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit cleans up source files in soc/nrf51 soc/nrf52
folders by removing unnecessary header inclusions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the inclusion of kernel_includes.h from
the nRF51 and nRF52 soc.h headers. This prevents from an
inclusion cycle formation on soc.h. In the wake of
kernel_includes.h removal, necessary header files have been
added in several source files to be able to compile Zephyr for
nRF5x SOCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds an explanatory comment in all soc.h headers,
where kernel_includes.h header has been included, to stress out
that this header must be included after SOC-specific headers are
brought in. The reason is the fact that kernel_includes.h needs
the ARM CMSIS definitions, which are brought in by the
SOC-specific header inclusions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The stm32f7 version of soc.h misses the changes done in commit
aee97be710 ("arch: arm: soc: remove core zephyr header inclusions
from soc.h") as it was not merged at that time. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This reverts commit 30529da0e4.
We should include SoC headers from HALs before we include
kernel_includes.h. On ARM this is needed because we tend to get CMSIS
related defines setup by the HAL headers.
Fixes: #8593
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The patch adds serial driver support for STM32F7 family
microcontrollers, includes pinmux definitions and DTS fixup file.
Signed-off-by: Yurii Hamann <yurii@hamann.site>
Enable HAS_SEGGER_RTT to allow user to select use of SEGGER RTT
and SystemView solution.
SEGGER provide a firmware that can convent ST-Link to J-Link,
And RTT is supports all stm32 SoCs, so lets enable RTT default
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
* We are now *much* better at not reserving unnecessary
system MPU regions based on configuration. The #defines
for intent are now an enumerated type. As a bonus, the
implementation of _get_region_index_by_type() is much
simpler. Previously we were wasting regions for stack guard
and application memory if they were not configured.
* NXP MPU doesn't reserve the last region if HW stack
protection isn't enabled.
* Certain parts of the MPU code are now properly ifdef'd
based on configuration.
* THREAD_STACK_REGION and THREAD_STACK_USER_REGION was a
confusing construction and has now been replaced with
just THREAD_STACK_REGION, which represents the MPU region
for a user mode thread stack. Supervisor mode stacks
do not require an MPU region.
* The bounds of CONFIG_APPLICATION_MEMORY never changes
and we just do it once during initialization instead of
every context switch.
* Assertions have been added to catch out-of-bounds cases.
Fixes: #7384
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit correct the issue introduce by aee97be which
changed the order of header inclusion that lead
to warning generation at compilation, that truend into errors
in CI.
This commit reinstantiate the initial header inclusion order.
Fixes#8563
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also simplify the definition of CC3220SF_DEBUG. 'default's can be other
symbols too, not just literal values. The condition for the symbol to be
visible (user-configurable) can be put directly on the prompt as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The nRF52810 is a low-cost variant of the nRF52832, with a reduced set
of peripherals and memory. This commit adds basic support for it in the
arch SoC and dts folders.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <ioannis.glaropoulos@nordicsemi.no>
The imxrt1050 is configured to use SYSTICK for the kernel timer, but
SYSTICK cannot wake up the soc from low-power modes. Disable low-power
modes on this soc until we have support for an alternative timer.
This fixes k_sleep on the EVKB version of the mimxrt1050_evk board. An
earlier version of the board (EVK, not EVKB), had A0 silicon which
by default did not enter low-power mode on a wfi.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove all CONFIG_*_EP_ADDR options but keep the default
values for it, as they are necessary to find ep_addr in
usb_ep_cfg_data associated with bEndpointAddress in
interface descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This commit removes the direct inclusions of device.h or gpio.h
from soc.h header files in ARM SOCs, to avoid soc.h include
kernel.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Set Zero Latency IRQ to priority level zero and SVCs to priority level
one when Zero Latency IRQ is enabled.
This makes Zero Zatency truly zero latency when the kernel has been
configured with userspace enabled, or when IRQ offloading is used.
Exceptions can still delay Zero Latency IRQ, but this is considered
ok since exceptions indicate a serious error, and the system needs to
recover.
Fixes: #7869
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
SDA and SCL pins can now be configured through DTS.
Pins on development kits have been assigned according to arduino
headers.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
The i.MX 6SoloX SoC is a hybrid multi-core processor composed by one
Cortex A9 core and one Cortex M4 core.
Zephyr was ported to run on the M4 core. In a later release, it will
also communicate with the A9 core (running Linux) via RPMsg.
The low level drivers come from NXP FreeRTOS BSP and are located at
ext/hal/nxp/imx. More details can be found at ext/hal/nxp/imx/README
The A9 core is responsible to load the M4 binary application into the
RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer,
and get the M4 out of reset.
The A9 can perform these steps at bootloader level after the Linux
system has booted.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Duplicate the CMSIS MPU-related macro definitions specifically
for Beetle SOC which is is not compliant with ARM CMSIS and
does not include the ARM CMSIS headers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macro definitions for MPU_RASR register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macro definitions for MPU_RBAR register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the macro definitions for MPU_CTRL register
bitmasks, defined in arm_mpu.h, and modifies the MPU driver to
directly use the equivalent macros defined in ARM CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Configuration parameter SOC_SERIES_NRF52X is common for all NRF5X SoCs.
Due to that it cannot select: CPU_HAS_FPU because not all Nordic
microcontrollers supports that. Selection of this parameter was moved
to configuration of each SoC in Kconfig.soc file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Created NRF5x peripheral list that can be used to describe each
NRF5x SoC. Basing on this description Kconfig file can display
and allow to configure only these drivers that are available
for particular SoC.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Replace code that handles erratas and performs other SoC-specific
initialization, that was actually copied from SystemInit() provided
in MDK for particular SoCs, with a call to SystemInit().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The various STM32 reference manuals sometimes define the USB endpoints
as IN or OUT only and sometimes as bidirectional, even in the same
manual. This is likely because the OTG implementation has one set of
registers for the IN endpoints and one other set for OUT endpoints.
However at the end a given endpoint address can both transmit and
receive data.
This causes some confusion how to declare the endpoints in the device
tree, and depending on the SoC, they are either the same number of IN
and OUT endpoints declared, or they are declared as bidirectional. At
the end it doesn't really matter given how the driver uses those values:
#define NUM_IN_EP (CONFIG_USB_NUM_BIDIR_ENDPOINTS + \
CONFIG_USB_NUM_IN_ENDPOINTS)
#define NUM_OUT_EP (CONFIG_USB_NUM_BIDIR_ENDPOINTS + \
CONFIG_USB_NUM_OUT_ENDPOINTS)
#define NUM_BIDIR_EP NUM_OUT_EP
This patch therefore cleanup the driver, the DTS, and the DTS fixups to
only define the number of bidirectional endpoints.
In addition to the cleanup, that fixes a regression introduced by commit
52eacf16a2 ("driver: usb: add check for endpoint capabilities"), which
introduced a wrong check for SoC only defining the number of
bidirectional endpoints.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit enables CAN on the STM32L432.
Tested on nucleo l432ck with external transceiver and loopback mode.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The prepended 0x causes DTC warnings and shouldn't be there.
Tested by compiling hello_world for nrf52840_pca10056 before and after.
Fixes#8334.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
This commit contributes the definition and the implementation
of an API for ARM MCUs to configure and get the configuration
of the security state targeted by a given external IRQ line.
The API is only available in Secure ARM Firmware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
qianfan Zhao