These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The mcux sim clock control driver was originally designed to pass
through the clock subsystem value from dts to the mcux CLOCK_GetFreq()
function. This assumed that the values in
include/dt-bindings/clock/kinetis_sim.h matched the enumeration in
fsl_clock.h, which is true for the coresys, platform, and bus clocks.
However, the low-power oscillator (LPO) clock has a different values in
k64 vs. kw2xd, therefore we must update the clock_control driver to
parse the value from dts and convert it to the fsl_clock.h enumeration.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new clock control driver for Kinetis SoCs that have the system
integration (SIM) module. This will allow mcux shim drivers, such as
uart and i2c, to abstract the call to CLOCK_GetFreq() behind the
clock_control interface and thus be reused for SoCs with different clock
architectures.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Andrzej Głąbek