Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Passkeys are always 6 digits in length and should therefore be
zero-padded if necessary.
Jira: ZEP-2113
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to achieve proper sharing of configuration options, everything
that is common to both the Host and the Controller should now be placed
in the top-level Kconfig file, and Controller-only options are in the
controller/ Kconfig one.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since most of nRF5x-based boards can be used either as a standalone
development kit or as a BLE controller to connect to an external host,
add DT overlays so that the baud rate is correctly set to 1Mbit/s
whenever building the hci_uart sample application.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08c682bfc0b80dfa88de859e90a011bcd2db2762
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some incompatible changes were introduced when net and bluetooth
branches were changed at the same time.
Change-Id: Ifa03f85d26a63ade0fcc029377d54850c0e92451
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
TCP requires buffers to be acked thus it retain a reference, but L2
driver actually consumes the buffer so it needs a context pool to store
to original ones.
Change-Id: Ie9083ab361d3674c33080f9e7e6c7248aaf7abc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ide66f75ca8fac0d5f65fbfc50dc9d130cf45b392
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
s/SAMPLES/APP for name shortening. Applying the change where relevant.
Not only IP addresse will be available as samples settings there but
also IEEE 802.15.4 channel, pan_id, and more for instance.
Change-Id: I05dd24989bd0c804d9588092d67044a3e063bc88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This may cause static analyser error such as the following:
Null-checking "tmp" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check.
if (tmp) {
Change-Id: Id04f8d052d8128003d5b91f7a8303940529ef261
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a sample application demonstrating doing continuous scanning and
sending out advertising packets periodically.
Change-Id: I0ce88afd73bed4928ba65472051c0f83ff27a632
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The introduction of device tree broke bluetooth sample builds for the
hexiwear_k64 and frdm_k64f boards. Add these boards to the peripheral_hr
test so this doesn't happen again.
Jira: ZEP-1745
Change-Id: I3e61a83db09cbb5834bd510bff851611e43844a8
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Makes configuration for tinyTile board.
Change-Id: I823e299dad905387de85fd6d74159c7540bc7edd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes following warning:
...
warning: format '%u' expects argument of type 'unsigned int', but
argument 6 has type 'int32_t * {aka int *}' [-Wformat=]
...
Change-Id: I3ac523b7c8daf08b0c8e7b43aad270306fe5d744
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add missing README.rst files to the last two samples.
Jira: ZEP-1540
Change-Id: I8dfa6489c6c65872594d4416870e2a41e701595d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reduce the pressure on the common RX buffer pool by reusing HCI
command buffers also for the Command Status or Command Complete
response to them. This also implies removing the existing Kconfig
variable for the command buffer sizes since the size is also dependent
on maximum Command Complete event sizes. Instead, reuse the RX buffer
size also for HCI Command buffers.
Change-Id: I006b287d64a0c9ca40de741aa9a424a49a927385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This enables these samples to interoperate with Linux 6LoWPAN over
Bluetooth implementation while that is being fixed, in the long term
we might remove it from the samples once Linux is fixed.
Jira: ZEP-1656
Change-Id: I8ca9fe5a27f43cebc75b6fe5a436a5e8fcee26d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, the function accepts a struct sockaddr * but the code
immediately type casts this to either in_addr or in6_addr. This is
incorrect behavior as the first field in a sockaddr is sa_family_t
and not address data.
So without special knowledge, a developer will use a sockaddr structure
as the parameter and then wonder why the address information isn't being
set correctly.
Let's change this parameter to void * which makes this function similar
to inet_pton().
Jira: ZEP-1616
Change-Id: I1fc9368da999d90feb07c03fac55dcc749d4eba6
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead of using a hard-coded string, make the sample use the Kconfig
variable for the device name.
Change-Id: Ib09f594e1cba221f9064318572bd90d38bd2733a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change BREDR_NAME to DEVICE_NAME so it can also be used as the LE
device name.
Change-Id: I9ef55d9dff098372d47d9d5754ad7a7163a65bc0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is very handy for debug purposes. It provides us with a reassurance
that at least something is happening, even if initialisation does not
complete (hangs forever).
Change-Id: I6ac1bfec84f8a6694f82d14fdc5d2a27aa1fc634
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The original buffer fragments can be used to send back a reply directly
since Bluetooth doesn't add anything to then.
Change-Id: Ifeac0e6c3abbd527c79912abc5f5b833b0b52171
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The idle stack already defaults to 256. The ISR stack size of 640 was
intended to make the app fit on 16k nRF51 variants and is now the
default, i.e. it doesn't need to be explicitly set anymore.
Change-Id: I8db3c080e1f84c65b27f931fa48c75bd90a2d3cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With LE Secure Connections the longest packet we require is 65 bytes
long: 64 bytes of Public Key data + 1 byte SMP opcode.
Extend the size of the L2CAP pool blocks so that they can fit such
packets and therefore one can use 70-byte
CONFIG_BLUETOOTH_CONTROLLER_TX_BUFFER_SIZE to achieve LE Secure
Connections pairing without HCI fragmentation.
Change-id: I2f11b4277ec5a24ceba79bccc7d84c64065b6e84
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Displays the present value of the indicators in the Handsfree
application.
Change-Id: I666ff2b15e70de8c1a26b902077d79c5c1a9d5fe
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The following readings were obtained after running the peripheral and
central_hr apps in qemu combined with the controller (hci_uart) on nRF51
and nRF52:
Main Stack 380
Idle Stack: 68
ISR stack: 532
Controller RX Stack: 388
HCI TX Stack: 516
The numbers set in this change provide a safety margin from the ones
measured empirically.
Change-id: Ice7ad7f081502e0ea1accf856a7937c0bf0783b2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This port ipsp sample to use the native stack so it can be used once
again.
Change-Id: I7975b017b0aa5bd81a1701692ec81527e39d4701
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI ECC commands are causing freezes in the controller build. Until
further investigation is done disable them to avoid issues when running
the controller standalone.
Change-id: Ifab0fa362348b72e88adaa5250c914770e4a70ba
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For consistency with RX_STACK_SIZE and the rest of stack sizes, rename
to use the normal naming scheme.
Change-id: Ib8d484482466fa8d629e6329e07b927abdd6f598
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ applications.
Change-Id: I767a04635b38d8ef7a02e8c7da3a5c99b0bc7709
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Carles Cufi