Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make sample working for other architectures.
SCSS_REGISTER_BASE and SCSS_SS_STS are defined in soc.h
Change-Id: Ie477520d2fb9bfcbbb5038ff42356a56d8180a1f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
More general spelling fixes, and cleaning up stray UTF-8 characters
such as curly-quotes, em- and en-dashes. Use replacement strings
for |reg| and |trade|.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Passkeys are always 6 digits in length and should therefore be
zero-padded if necessary.
Jira: ZEP-2113
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This creates a common API for network sample applications for
setting up IP addresses etc. The HTTP client application is modified
to use this API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of separate sample application that does everything
related to HTTP client connectivity, create a HTTP client library
that hides nasty details that are related to sending HTTP methods.
After this the sample HTTP client application is very simple and
only shows how to use the client HTTP API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to achieve proper sharing of configuration options, everything
that is common to both the Host and the Controller should now be placed
in the top-level Kconfig file, and Controller-only options are in the
controller/ Kconfig one.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit provides sample application for sensor hts221.
By default, it is enabled on board disco_l475_iot1
Change-Id: I535fac8a670fa89cc1cae15ea1abe9cfe4b6c56b
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The files for the Arduino Due needed to be updated to use the new
configuration when the SoC moved from the atmel_sam3 directory to
the atmel_sam/sam3x directory.
Jira: ZEP-2067
Signed-off-by: Justin Watson <jwatson5@gmail.com>
Since most of nRF5x-based boards can be used either as a standalone
development kit or as a BLE controller to connect to an external host,
add DT overlays so that the baud rate is correctly set to 1Mbit/s
whenever building the hci_uart sample application.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We're moving the project code to GitHub folks, so change references
in the documentation from gerrit over to GitHub:
https://github.com/zephyrproject-rtos/zephyr
Change-Id: Ic491a62ed43fc799eb5698e92435cb6eb4d89394
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The sample in its default configuration waits for DNS server
configuration via IPv4 or IPv6 specific means. Until this
information is receives, DNS querying won't even start. Make
diagnostic messages explicit of this fact, because if user
doesn't have required services available in the network, the
sample will appear to just hang.
Jira: ZEP-2061
Change-Id: I56a5b7354a2d1239a35d8334ed95a15ebd19254f
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_pkt_get_len() is the correct API to get network packet
length.
Jira: ZEP-2076
Change-Id: Ifff6f3d5df28b3684cc8bb3758f9e8bccd5d4534
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add config file to be used for testing KW41Z's IEEE 802.15.4 driver.
Jira: ZEP-2026
Change-Id: I7042c57ad33ff72b35d24fbf28085b99b2301726
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
The dns_resolve sample application did not had project file for
two boards that the README file is talking about, so adding them here.
Jira: ZEP-2040
Change-Id: I68e825854a171b09d56df91ab80ce5d9349733f6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In tickless kernel mode, time parameter of _sys_soc_suspend is in
milliseconds. Based on the kernel mode use the correct
mulitplier to convert to seconds.
Jira:1821
Change-Id: Idf156f56ece79a82729ebb124d1552a5eeb69e25
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Adds changes to enable existing kernel and timer tests and samples to
be used to test the tickless kernel feature.
Updated samples/philosophers and tests/kernel/timer/timer_api apps
Run the tests using following commands
make pristine && make BOARD=<board> CONF_FILE=prj_tickless.conf qemu
Board could be any of the following
qemu_x86
quark_se_c1000_devboard
Jira: ZEP-339 ZEP-1812
Change-Id: I1530b19b79ddeb0e2181594caf15f3ac28ff51f4
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Sys log already break a line after each line, by default, so removing
the '\n' on log messages.
Enabling support for sys log colors.
Change-Id: Ica3a601aba0bbbd2d9438b41fb7bca0aad9c05f4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Don't return without freeing the session when relevant.
Change-Id: I9e5903791f8eb54026c4bb2ddda9f1fe9f3f7bb3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch contains a MPU test with a set of options to check
the correct MPU configuration against the following security
issues:
* Read at an address that is reserved in the memory map.
* Write into the boot Flash/ROM.
* Run code located in SRAM.
The MPU test application uses the Zephyr shell.
Change-Id: Ib40dc76b082b800884fd636a1509a0712227d681
Signed-off-by: Marc Moreno <marc.morenoberengue@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This sample application uses the kernel system logger already present
in Zephyr and publishes events through the SEGGER RTT protocol, so it's
available by the SEGGER SystemView application.
[1] https://www.segger.com/systemview.html?p=1731
Jira: ZEP-1463
Change-Id: If1eba4644b95175660b3040bdc4b2717b2cfc9ad
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08c682bfc0b80dfa88de859e90a011bcd2db2762
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some incompatible changes were introduced when net and bluetooth
branches were changed at the same time.
Change-Id: Ifa03f85d26a63ade0fcc029377d54850c0e92451
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This sensor is supported already with many features, using it to test
SPI and I2C is an overkill. For both basic I2C and SPI samples we have
the FRAM samples supporting both IOs.
Change-Id: I794e584bd540d5fe6353fa3370aac0f1d6d105dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TCP requires buffers to be acked thus it retain a reference, but L2
driver actually consumes the buffer so it needs a context pool to store
to original ones.
Change-Id: Ie9083ab361d3674c33080f9e7e6c7248aaf7abc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I248d53000d8e57b902b9a18fdcfc9e995142a8b3
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a sample demonstrating sound output using PWM to a piezo buzzer
connected to the external edge connector port P0.
Change-Id: I8c0902fd935f2eb3b9979476a7540e7a0216ca63
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Most boards enable a serial driver by default, but the hexiwear_kw40z
does not because it uses Segger RTT for the console. This sample
requires a serial driver, so add CONFIG_SERIAL=y to its project conf
file.
Jira: ZEP-1391
Change-Id: Iee813d1054378040fe9ff72a3ca1ea7bd66bcdfe
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for nRF5x series GPIOTE based PWM driver
implementation.
Provides upto 3 pins/channels using one HF timer, two PPI
channels per pin, and one GPIOTE config per pin.
Change-id: I6056b199ec2cff595ba8fea9f659a0338ed4635b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This can be useful to override the default value, for testing.
Change-Id: I23b559152c71955ff5aa6fd3643f1f40f5594194
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
DNS resolving is better done with DNS resolve API so remove
the DNS client API which is quite hard to use.
Change-Id: Ide4973a5be674414ea6e04a35c938195cce40b6a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Modify the code to use DNS resolve API instead of DNS client API
as the latter is being phased out.
Change-Id: I6a7618d770621fee1f502d2bc277a162c589108a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to test the coaps_server sample app on
Arduino 101 board.
Change-Id: I7b393dac03a8020b7bd515c3b5b2fd961940bc21
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
Added bt test code in the http_server sample app and in order
to test on Arduino 101 board, added prj_arduino_101.conf file.
Change-Id: Ie68a81ee809e8618f70b5fab6fdbd66692401014
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
The filter expects CONFIG_, otherwise it is noop
Change-Id: I2b0a02b6450287a090b69a12324fe7f7cf494999
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Carles Cufi