Add ESP-8266 modules shield. The ESP-01 needs to be loaded with
ESP8266 AT Bin V1.6.2 which is compatible with ESP8266 AT Bin
V1.7.x which is the minimal supported version by ESP WIFI driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Fix detailed API description rendered into text boxes.
API documentation with more that one paragraph must use the @brief tag
to be rendered correctly.
Fix indentation level of '*' in doxygen documentation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Struct members are not always documented in the zephyr online HTML
documentation. Enable it for all Bluetooth related documentation
groups.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The goto instruction was removed when adding the RX thread.
While still working, this clearly break the clean handling of
error cases.
Re-instantiate the goto instruction.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
ipm_busy is meant to be used as mutex on transport layer accesses.
Due to wrong configuration on rx_thread, imp_busy was a no-op.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Split BT_CTLR_CONN_RSSI option into two, the base option enables the
Read RSSI command, while the new BT_CTLR_CONN_RSSI_EVENT enables the
connection RSSI events. There is no handling of RSSI events, only a
BT_INFO log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update EDTT default configuration to make it easier to debug. The
use of maximum log level to restrict default output caused some
confusion. Instead remove debug options to reduce the default log
output. Enabling debug logs is now similar to other samples and tests.
Remove options commented out, no need to keep them.
Move comment to the matching CONFIG.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adding RFC1350 compliant support for TFTP Client in Zephyr. The
current implementation is minimal and only supports the ability
to get a file from the server.
Things for the future include support for putting files to
server and adding support for RFC2347.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
The bluetooth subsystem is now fully compatible with the new timeout
API, so remove the selection of the legacy API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth samples or board samples using bluetooth to use the
new k_timeout_t struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth mesh to using k_timeout struct. Many of the mesh
modules uses timeout calculations, so it is most practical to keep
the s32_t type and only initialize a k_timeout_t struct when
calling the kernel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth host to using k_timeout_struct for the timeout values.
This is mostly replacing s32_t with k_timeout_t.
In l2cap the handling of no timeout in send channel request was removed
since the timeout is both documented as minimum of 1 second and never
given any no timeout value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth controller to using the new k_timeout_t API so that
CONFIG_LEGACY_TIMEOUT_API can be turned off.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The board efr32_radio_brd4250b replaces this removed board. This
commit removes this duplication.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The HTML documentation generation does not work properly if
we try to put more than one board into same directory. So rename
the directory to reflect this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to avoid retransmissions from the peer's side
on full-close, handle states properly.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Replace DT_SNPS_ARCEM_0_CLOCK_FREQUENCY with a PATH based reference
to cpu@0 (DT_PATH(cpus, cpu_0)) and than getting the clock_frequency
property:
DT_SNPS_ARCEM_0_CLOCK_FREQUENCY ->
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert from DT_MMIO_SRAM_10000000_BASE_ADDRESS to
DT_REG_ADDR(DT_NODELABEL(ddr0)) and similar for
DT_MMIO_SRAM_10000000_SIZE to DT_REG_SIZE().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_LIS2DH_INT* to just LIS2DH_INT*.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_INST_AT2X* to just INST_DT_AT2X*.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We want to limit DT_ prefix to macros from devicetree.h and generation.
So rename DT_INST_MCP320X* to just INST_DT_MCP320X*.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Complete STM32 conversion to new DT macros by removing
remaining occurences of DT_ST_STM32_ADC_FOO_LABEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If net_pkt_pull() would cause an empty net_buf, then unref
those empty buffers from the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far socket errors reported by poll/recvfrom were ignored, which could
lead to an unexpected behavior when socket was left in an undefined
state.
Fix this, by requesting a re-registration in the LWM2M state machine,
which will close the faulty socket and open a new one. Note, that simply
closing and re-opening a socket in the lwm2m engine would not work,
since this would silently invalidate any open observations on the
lwm2m server side (due to port number change). Triggering a fresh
registration will notify the server to update its observations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is more a sample than a test, so put it under samples with the goal
of having dedicated tracing tests in the future under tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When we converted the GPIO driver to the new GPIO API we didn't update
the MMU mapping defines. Use the macros from devicetree.h and
nodelabel's to get the register base address and sizes for the GPIO
blocks.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit enables the QEMU icount mode for `mps2_an385`, in order to
decouple the host clock from the emulated guest clock.
This prevents guest timing instability from causing test failures when
the host CPU load is very high.
The icount `shift` value of 7 was empirically chosen to allow the tests
to complete in both realistic and reasonable amount of time.
The following are quick notes on the parameters used:
* -icount shift=7: Execute one instruction every 128ns of virtual time
* -icount align=off: Do not synchronise the host and guest clocks
* -icount sleep=off: Advance virtual time without sleeping/waiting
* -rtc clock=vm: Isolate the guest RTC time from the host
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Complete STM32 conversion to new DT macros by removing
remaining occurences of DT_ST_STM32_ADC_FOO_LABEL.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On cortex M4, AHB clock is equal to SystemCoreClock
On Cortex M7, AHB clock is equal to SystemCoreClock/HPRE
By the way, D1CPRE is of no use when starting from SystemCoreColck.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Standard "Requirements" section copied from other networking samples,
making clear the network connection requirements and linking to
instructions for QEMU networking.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Gerson Fernando Budke