The NIOS2 I2C driver does not utilize Kconfig symbols for per instance
I2C anymore so we don't need to set them in the conf files for this
test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The STM32 I2C drivers don't utilize the Kconfig symbols for per
instance I2C anymore so we don't need to set them in the
conf files for this test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
harness being set without actual use of harness (via harness_config)
makes the test behave differently.
Fixes#24661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adjusts L2CAP CoC related command and responses to the
recent BTP API changes.
BTP has been extended with Enhanced CoC support, thus few L2CAP
CoC related commands have been changed.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Convert DT_RTC_0_NAME to DT_LABEL() references based on the compat being
defined in the build.
Introduce a set of macros that will generate a list of labels based on
compatible matches.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit provides the workarounds for the CMSIS-DSP RIFFT input
buffer access bug reported in #24701.
The upstream issue for this bug is ARM-software/CMSIS_5#906.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This configures the nucleo_f411re board for testing the SPI loopback
with DMA V1 transfer. DMA instance 2 is used.
This test requires pin SPI_A_MISO (D12) to be connected
to pin SPI_A_MOSI (D11) on the nucleo_wb55rg boardtest dma_V1
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This configures the nucleo_l476rg board for testing the SPI loopback
when with DMA transfer.
It requires pin MOSI to be connected to pin MISO of the SPI1
SPI tx/rx are assigned to the request ID 1 of dma1 channels 3 and 2
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds a new testcase in the spi_loopback test application
to use several buffers for the DMA transfer.
It requires the MOSI to be connected to the MISO of the SPI1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This changes the spi_loopback test application to use the DMA transfer.
In case of DMA, some testcases are useless.
It requires the MOSI to be connected to the MISO of the SPI1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Convert DT_UART_{0,1}_NAME to DT_NODELABEL() references as the cases are
board specific and this allows us to remove DT_UART_{0,1}_NAME defines
in dts_fixup.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace:
DT_FLASH_ERASE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), erase_block_size)
DT_FLASH_WRITE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), write_block_size)
As this allows us to phase out the old generator.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Currently there are no test for openthread on zephyr.
Created tests for OpenThread platform radio interface.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
This enables BT_EATT for shell samples so it can be build test by CI and
gives user the ability of test it using shell commands.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for running the DAC loopback test case on the NXP
FRDM-K64F development board.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add support for running the DAC loopback test case on the NXP
TWR-KE18F development board.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Set the TICK_IRQ on litex and rv32m1 based on DT_IRQN(). For litex we
use DT_NODELABEL(timer0) and on rv32m1 we use DT_ALIAS(system_lptmr) to
determine the timer device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Substitute integral constants where call sites passed named constants
that have timeout values as arguments to parameters that expect
millisecond durations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update EDTT default configuration to make it easier to debug. The
use of maximum log level to restrict default output caused some
confusion. Instead remove debug options to reduce the default log
output. Enabling debug logs is now similar to other samples and tests.
Remove options commented out, no need to keep them.
Move comment to the matching CONFIG.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is more a sample than a test, so put it under samples with the goal
of having dedicated tracing tests in the future under tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert CAN to use a chosen node property that is similar to how we
handle zephyr,entroy or zephyr,flash-controller as the means to select a
specific peripheral instance utilized by a subsystem.
Replace references of the form:
alias {
can-primary = &can1;
};
with:
chosen {
zephyr,can-primary = &can1;
};
Replace various macro/define references with either
DT_CHOSEN(zephyr_can_primary) or replace DT_ALIAS_CAN_PRIMARY_LABEL
with DT_CHOSEN_ZEPHYR_CAN_PRIMARY_LABEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The hwinfo driver test currently filters for `CONFIG_HWINFO`, but this
symbol is set to `y` by the `prj.conf` and therefore will always be
selected.
This commit removes the unnecessary `CONFIG_HWINFO` filter.
Note that the hwinfo driver test `ifdef`s `CONFIG_HWINFO_HAS_DRIVER`,
and having an actual hwinfo driver implementation is not a requirement
(if no hwinfo driver is available, the test validates that -ENOTSUP is
returned by `hwinfo_get_device_id`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The bounds check failed to account for the additional space required
for the terminating NUL after the encoded value was written.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If timeout != K_NO_WAIT, then return immediately when not all
bytes_to_read or bytes_to_write have been transfered, but >=
min_xfer have been transferred.
Fixes#24485
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Convert driver to use the new device tree macro's instead of
dts_fixup.h based macros. This moves us closer to removing both
dts_fixup.h and per instance Kconfig symbols.
The pinmux_mchp_xec is also being updated since it's using DT
from GPIO.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements a file descriptor used for event notification that
behaves like the eventfd in Linux.
The eventfd supports nonblocking operation by setting the EFD_NONBLOCK
flag and semaphore operation by settings the EFD_SEMAPHORE flag.
The major use case for this is when using poll() and the sockets that
you poll are dynamic. When a new socket needs to be added to the poll,
there must be some way to wake the thread and update the pollfds before
calling poll again. One way to solve it is to have a timeout set in the
poll call and only update the pollfds during a timeout but that is not
a very nice solution. By instead including an eventfd in the pollfds,
it is possible to wake the polling thread by simply writing to the
eventfd.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
This commit renames all local definitions with the name `PORT` in the
net tests, in order to prevent name conflict with certain HALs
(notably, Atmel SAM E5x HAL).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
No point to change the throw_sleep to k_timeout_t because we
are calculating the timeout beforehand which can lead to
unexpected results if using k_timeout_t.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests were failing as they were looking for an alias which didn't exist
Also, because some code in kscan_handlers.c wasn't compilable
Signed-off-by: Mark Olsson <mark@markolsson.se>
Kumar Gala