PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This KSDK flash shim driver supports the device in the FRDM K64F
platform (enabled with this commit).
WARNING: the driver disables the system interrupts for potentially
long periods of time. This is required to avoid Read-While-Write
issues since most platforms run in XIP mode.
For more detailed information see the link below:
http://cache.freescale.com/files/32bit/doc/app_note/AN4695.pdf
Change-Id: I70f8d09080251033ce2f45be0c2eb95c19fded08
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Add the necessary infrstructure to support power management for the
QMSI Flash driver. If deep sleep is supported, this driver supports
saving its context to be restored on resume.
Jira: ZEP-1006
Change-Id: Ied88e86d13ef9e4e62bd6ac9d8454d9a9a3d2962
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The W25QXXDV_PAGE_SIZE is not a valid erase size supported by
the flash component (section 7.2.23 - 7.2.26 of datasheet
https://www.winbond.com/resource-files/w25q16dv_revi_nov1714_web.pdf)
and it is not used by any code so remove it.
Jira: ZEP-615
Change-Id: I4315fa082d5cbceda65ae8567e0a77e2d4066ef1
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Calls to flash write or erase operations can get preempted
in the middle of the API call if a concurrent call (from
other fiber or task) to the same API is made. The patch ensures
concurrent API calls from other fiber/task is put on hold until
the current operation is completed.
The mechanism is by default not activated. To enable
it, the following flag needs to be defined:
CONFIG_SOC_FLASH_QMSI_API_REENTRANCY
Jira: ZEP-414
Change-Id: I39429e40cb6ed446123dd1a1d7c7acc1b12417aa
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixed doxygen comments for flash API usage. Clarified the use of
flash_write_protection_set API for write and erase operations.
Jira: ZEP-383
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change-Id: I6a323915c63a393b7be8f96fe3fcd9616a9b21d1
Quark flash sub-driver. It is based on the QMSI driver.
In order to enable this driver, the following options
must be set.
CONFIG_QMSI_DRIVERS
CONFIG_QMSI_INSTALL_PATH
CONFIG_FLASH
CONFIG_SOC_FLASH_QMSI
Origin: Original
Change-Id: Iffbea3b17624c755e367677b76d7216c2fba2ca1
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
If the driver fails initializations, do not set the driver_api.
This follows the idea that device_get_binding() will not return
a reference to the driver instance when driver init fails.
Change-Id: Iff56b4150658a76567928b1fd166bde5d2848d52
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch replaces all occurences of the macro DEV_NO_SUPPORT by
-ENODEV at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I03007527367b03e6fd72a85004b7d3b81046a6a6
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_OP by
-ENOTSUP at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I46aec3c65963018c479b01602e4a3eec8650eaff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_FAIL by -EIO
at the driver level. So this patch touch the files under drivers/,
include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I0594ab5dbe667e074c250129e7c13ce512ac940f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Now that the internal libc has the off_t type it's the natural choice
for the offset parameters in the flash API.
Change-Id: I69999999625b46634f6d3008fe1b3f82c17d357c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes the ordering consistent e.g. with SPI, Bluetooth and
Networking APIs. This also follows the order of parameters in the
POSIX read/write APIs.
Change-Id: I4f11c8c90ccadf176d79f6a7bbd98aac61c26cf5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
size_t is the natural type for any integer that describes a number of
bytes. For the actual data use void pointers to avoid callers having
to do explicit typecasts if the data doesn't originate in a uint8_t
array. Also use a const pointer for writing to avoid typecasts for
data that originates in a const location.
Change-Id: Idbfc14b2d61ca6189411b211c3727f857dbd4059
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
SPI flash sub-driver to support WinBond SPI flash.
It is based on the generic flash driver framework.
Change-Id: I58202e38445a052fa0556b03f854e75ef836e2dd
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Baohong Liu