ESP32 and ESP32-S2 HW clock are tied to DTS clock configuration.
This changes updates the default configuration to retrieve
this information from DTS.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
esp32_net is part of AMP solution and it is not intended
to have PM support. Ignore this board from tests
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Remove regulator-fixed-sync specialization, create a single driver that
is always synchronous. The asynchronous part is rarely/never used, so
let's keep things simple for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enables logging testing for qemu_xtensa along with the fixes needed to
correctly run the tests.
Several tests in log_api rely on being able to calculate the size of
the message in the mpsc_pbuf to know when an overflow occurs. The
size being calculated assumed a ROUND_UP size alignment to sizeof(long
long). On xtensa this is actually 16 bytes as defined by
CBPRINTF_PACKAGE_ALIGNMENT.
Changes the size calculation for SIMPLE_MSG_LEN to account for this.
The second issue was a misaligned package that would cause reading
from the incorrect memory when going to format the package with cbpprintf.
Fixes the padding used to align the package in cbprintf.h and adds a build
assert ensuring correct alignment when building against xtensa in both
cbprintf.h and log_msg.h.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This enables the support for the Semtech SX1276 chip on board (see the
pinout[1] and schematic[2] documents).
The chip is connected to SPI as follow:
| PIN | GPIO |
| ---- | -------|
| CS# | GPIO18 |
| CLK | GPIO5 |
| MOSI | GPIO27 |
| MISO | GPIO19 |
| RST# | GPIO14 |
Additionally, the LoRa DIO PINs are connected as follow:
| PIN | GPIO |
| ---- | -------|
| DIO0 | GPIO26 |
| DIO1 | GPIO35 |
| DIO2 | GPIO34 |
_Note_: The first three DIO PINs are connected to the ESP32 MCU only.
[1]: https://resource.heltec.cn/download/WiFi_LoRa_32/WIFI_LoRa_32_V2.1.pdf
[2]: https://resource.heltec.cn/download/WiFi_LoRa_32/V2/WIFI_LoRa_32_V2(868-915).PDF
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Instead of just declaring the memory window register in DTS and have
everything else all over the place (headers, Kconfig, etc.) this change
defines the memory window instances in DTS and uses the device model to
initialize the windows. Code is still part of the SoC, given that we do
not have a driver subsystem suitable for this type of device yet.
Move FW status to own workflow and separate from window setup.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add Intel dmic dai dts definitions for ace15, cavs15 and cavs25
platforms.
Add also pre dts cmake files as the dmic nodes use same address and emit
warnings otherwise.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
to the ESP32 S2 Franzininho educational development
board.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
boards: xtensa: esp32s2_franzininho: remove docs
section for debugging since this board does not have
any on board debug or connection for that.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
Adds support for the esp32_ethernet_kit board.
esp32_ethernet_kit board is useful for testing ESP32 Ethernet
Signed-off-by: Grant Ramsay <grant.ramsay@hotmail.com>
The one in esp32_net_defconfig is redundant and lpcxpresso51u68 is not
really using any of the pinmux api, so that can go as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The tag that marks pinmux as supported is not used by any test or
sample, therefore this doesn't seem needed anymore.
- remove from 3 mec1x boards, they still use pinmux,
but as the tag is neither used in tests and pinmux
deprecated anyway no need for it.
- remove from 5 esp32 boards, as they now use pinctrl.
- remove from 2 lpc boards, as they now use pinctrl.
- remove from 1 stm32 board, as it now uses pinctrl.
- remove from 1 npcx board, as it now uses pinctrl.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Update the usage for cavstool.py to remote-fw-service.py to adapt
the renaming. And also correct the params --log-port and --req-port
in the doc.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
This PR removes information regarding previous
west extension related to OpenOCD download.
This extension is no longer available and manual download
is required until upstream OpenOCD receives
all xtensa and riscv patches.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
* Document use of OLED display.
* Fix indentation in list of features.
* References are only rendered if they are used and currently most of
them are not. Introduce a list of links in addition to the actual
references to make them show up.
Signed-off-by: Michael Laß <bevan@bi-co.net>
trng0 refers to the entropy source in the ESP32, as defined in
esp32.dtsi. It enables the configuration item ENTROPY_ESP32_RNG and
therefore offers an entropy driver, making the use of
CONFIG_TEST_RANDOM_GENERATOR unnecessary.
This change helps running the esp32_wifi_station sample.
Signed-off-by: Michael Laß <bevan@bi-co.net>
Makes DAI_SSP_HAS_POWER_CONTROL depend on DAI_INTEL_SSP
in intel_adsp_ace15_mtpm Kconfig.defconfig.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Now that interrupt controller drivers are enabled based on devicetree
we can remove any cases of them getting enabled by *.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
We drive the default setting of CONFIG_MM_DRV_INTEL_ADSP_MTL_TLB
via devicetree so there is no need to set
CONFIG_MM_DRV_INTEL_ADSP_MTL_TLB in defconfig files.
Signed-off-by: Kumar Gala <galak@kernel.org>
The boards folder uses ~142.8 MB, being the largest in the repository.
This is due mostly to board images, which are in most cases not
optimized for web content. This patch tries to address this problem by
converting all pictures to JPEG (quality 75) and by adjusting its size
up to 750 px (the width of the documentation content). Images that
specified a fixed width in rst files are converted down to that value
instead.
With this patch, folder goes down to ~53.5 MB from 142.8 MB (-~63%).
Note that this patch introduces a new set of binary files to git
history, though (bad).
The process has been automated using this quickly crafted Python script:
```python
from pathlib import Path
import re
import subprocess
def process(doc, image, image_jpeg, size):
subprocess.run(
(
f"convert {image}"
"-background white -alpha remove -alpha off -quality 75"
f"-resize {size}\> {image_jpeg}"
),
shell=True,
check=True,
cwd=doc.parent,
)
if image != image_jpeg:
(doc.parent / image).unlink()
for doc in Path(".").glob("boards/**/*.rst"):
with open(doc) as f:
content = ""
image = None
for line in f:
m = re.match(r"^(\s*)\.\. (image|figure):: (.*)$", line)
if m:
if image:
process(doc, image, image_jpeg, size)
image = Path(m.group(3))
if image.suffix not in (".jpg", ".jpeg", ".png"):
content += line
image = None
continue
image_jpeg = image.parent / (image.stem + ".jpg")
size = 750
content += (
f"{m.group(1)}.. {m.group(2)}:: {image_jpeg}\n"
)
elif image:
m = re.match(r"\s*:height:\s*[0-9]+.*$", line)
if m:
continue
m = re.match(r"\s*:width:\s*([0-9]+).*$", line)
if m:
size = min(int(m.group(1)), size)
continue
content += line
if line == "\n":
process(doc, image, image_jpeg, size)
image = None
else:
content += line
with open(doc, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We had a bunch of QEMU logos embedded in all QEMU boards. Logos do not
add much value to the documentation, so just delete them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Now that entropy drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Filip Kokosinski