From old build system -DPERF_OPT was set with no optimisation, that
was buggy and did not function as expected with new Makefiles.
Change-Id: I21ebbe0e9314d0a25cb53c6455ff244252e44af0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Dependency on ia32_pci here is wrong, also simplify the variable
handling and logic.
Change-Id: I535e25e12283c288250b23327b2a8f698da31341
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Those ports uses different instructions to get accessed: in/out
instructions. It differs in many ways with memory access, and it's much
slower. It's unset by default, but some arch exposing legacy UART ports
might need it.
Change-Id: I06f2a7c7812e720863957bd20d5c2b8b02c10734
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Avoid adding platform data to defconfig directly and instead
use Kconfig. This will allow overrides.
Change-Id: I95984cb691e8a796ff14b92c6985fceccb0b9cad
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default values for the platform will be used when running
make *_defconfig instead of hardcoding them in the defconfig directly.
Change-Id: If2945cc11cfca787c2b93a96b502650f1dddd29d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This makes variables readable and consistent with other drivers
we have.
Change-Id: I816f133279497eafd5d5614013c8d224d5909590
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This driver naming is an exception which compared with all other drivers
we have. To keep things consistent the configuration options and variables
are renamed to <type>_<name>.
Change-Id: Ib95aa09630a507848f78d8f2c28706b545eed06d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On Galileo, there are additional GPIO pins on the legacy bridge.
This adds the config options to enable the driver for those GPIOs,
using the MMIO-based GPIO driver.
Change-Id: I0014018238a40577631bafbdf55ed0c6c0886194
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are 3x PCAL9535A GPIO chips on Galileo gen2 board.
This enables the driver for all of them.
Change-Id: Ie4d1aec9427e159a60322caac541b75e7ef973db
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rename system.c and platform_config.c files in preparation for merging the ia32
based platforms to remove code duplication.
Change-Id: I88caf5294817e06c235379e92cd8ee7472e88028
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change the IOAPIC driver to be initialized directly from the init
system. The function signature of _ioapic_init() function is updated
accordingly.
Change-Id: I2f824ac745926966eebb23f60445a41e1df9eb8f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change the LOAPIC driver to be initialized directly from the init
system. The function signature of _loapic_init() function is updated
accordingly.
Change-Id: I5ed26d53524c8526d413a05ac9a7a58dd4264c5a
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change the PIC driver to be initialized by the init system. To be
initialized by the init system the function signature of the
_i8259_init() function needs to be changed to the standard *_init()
function signature specified by the device model.
Change-Id: I63bf1cd0ce78920fa20da94f5966e5aab4bf41b2
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The code fragment to bind the instances of the I2C driver is not
platform specific but is driver specific.
All the information required to bind a driver instance comes from
CONFIG_ variables. Having the binding code with the driver code
avoids duplicating the code fragments in each platform where the
driver may be used.
Change-Id: I9ea132c9340437ccb292bb8f3fa3d3a2b2a794db
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The code fragment to bind the instances of the SPI driveri is not
platform specific but is driver specific.
All the information required to bind a driver instance comes from
CONFIG_ variables. Having the binding code with the driver code
avoids duplicating the code fragments in each platform where the
driver may be used.
Change-Id: Iff40227e3e25d431ae870d585445971f35d934dd
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The code fragment to bind the instances of the GPIO driver were being
replicated in every platform_config.c This code is not platform
specific but is driver specific.
All the information required to bind a driver instance comes from
CONFIG_ variables. Having the binding code with the driver code
avoids duplicating the code fragments in each platform where the
driver may be used.
Change-Id: Ie07a3d12d25201e82ce7074455e6c036f463851b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The c files actually check for the Kconfig variables, so there is no
need to do the checking in the Makefile again adding double logic.
Change-Id: I8521047bd575c8f9d64f7d8e5abfb5eee8a40cb3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
if printk is disabled, the variables will be unused and we will
get compiler warning.
Change-Id: I5dad791ae89d7a8c98f9e4660da472ef0caacc92
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reduces the defconfig file to only those options needed
for the platform. We also introduce a kernel independent config
file (no micro/nano prefix) that be the default.
Sanity checks depends on the nano/micro file naming, so until it
is modified to support the new model, we keep the old files.
Change-Id: Ife1744d88f7bf229c1da04d5b86db26678af7f6c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the future there will be no need to deal with such updates anymore.
Change-Id: Ib66b826f054f444ccb8f7e6f0e6a31e8d93f342f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This makes platform configuration more readable and cover cases when
Bluetooth is enabled and Console disabled.
Change-Id: I49aba6e47031de86f4bb5fbe988495a1db318666
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The generic name is too generic and when it appears on its
own, for example nano_generic_defconfig, it is not
visible what the file is about, so call it generic_arc the same
way the Kconfig platform is called.
Change-Id: Icf737f305d84142dad4f52fd26a5c7481f9fc5be
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This make platform configuration more readable and cover cases when
Bluetooth is enabled and Console disabled.
Change-Id: I17da603915e7e32f8e76f497d91d786ca727ca92
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for a "generic" ARC implementation. This is a misnomer
since ARC platforms are synthesized by the SOC vendor and are specifc
to a given vendors implementation/configuration. This platform
support if for an SOC where we are allowed to let the code to support
the SOC into the wild but not allowed to name it in public.
This change allows to work on support for the SOC in the open and let
the rest of the community see the evolution of of the platform.
Change-Id: Idbb52fc80464ec04e91665871951f6ea79e5299d
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Add Kconfig option to specify how interrupt is triggered for GPIO.
Change-Id: I8db988efb0c081a18e585ccc6dd121bff61d6ccc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make config variable name match the function. The PIC is never turned
on in the zephyr code so there is nothing to shut off.
Change-Id: I1627e5a35cc37ef7959f36758c1e1aec03e22782
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Add Kconfig option to specify how interrupt is triggered for I2C.
Change-Id: I5f5afdf6bfc2adbfc2f66bdc1f58bd3a8fc60ecf
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This simply copies the PIC disabling code from ia32 into ia32_pci.
Change-Id: Ib48cb96d3f0ba7356431ce1b2221f3f346e61c8d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ns16550 was the only driver using those, and now that it properly uses
sys_io.h functions we can remove inByte and ouByte from ia32's board.h
files.
Change-Id: Id2a691b8ecf43baacd64bc9be09feb15ef9eb339
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only 1 port is available on Quark through the PCI bus.
Change-Id: Ie0e0173686947134d2553dd0fd0230ffa5a1d456
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This will initialize the UART console port at an earlier stage than
usual in order to get early debugging outputs.
Change-Id: Ica90fe3481687ef20488b59f6d554a8af1d22559
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Anas Nashif