Add a sample app to demonstrate the usage of Fujitsu SPI
FRAM.
It uses SPI 1 on quark spi controller and gpio 20 as CS.
Change-Id: I30c83bdd8312ca0cab7a62e397c0cb4ade0821cb
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this sample app. The component is no longer on the
board (quark_se_c1000_devboard).
Change-Id: I342616781e6f343cfc66b89cbdf85de5844f6f4a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for lcd hd44780 app.
Some delays were rounded up to multiples of millisecond, since
k_sleep only takes multiples of millisecond. Based on the lcd
datasheet, this should not cause any problem.
updated some comments based on what the code is actually doing.
Change-Id: I533c822dbaea0246dcd62a76cc23ce0d8edd4630
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for the watchdog sample app.
Change-Id: I6b53f066033a451c3aafe7f3a528c7f3461ae305
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Add a new pwm app (rgb led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a rgb led is added. It will use the new API
pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: If8e5d8ab22dcf8b7cf3665e38949715c61ca9c03
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (motor control) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a servo motor is added. It will use the new
API pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: I65857848e64d0478c4e12d1317b2089cdd1ecf5c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (fade led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to fade led is added. It will use the new API pwm_pin_
set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: I8d929a21f7de88307c47b52f98f131e00b2fdbe7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Replace existing APIs which will be deprecated by
the new API in this app and rename the app.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
Since the two existing APIs (pwm_pin_set_period and
pwm_pin_set_values) used by this app will be deprecated,
this change is to replace them with the new API
pwm_pin_set_usec().
To demonstrate the usage of the new PWM APIs, more apps
will be added. All the apps will be located in their own
sub directories. The existing app is actually one to
blink LED. So, it is moved the "blink_led" sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: Icc3fbf6b6c25db9590c63bc08f40ec62c87c0f16
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This sample justs outputs the SPI FLASH IDs.
I think we should improve this to also output done, otherwise
it looks like its stuck or something.
Change-Id: I18d5919c1e25bb5aaa9ceba53793cc14b15f3c77
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
These platforms don't have the hardware and will always fail.
Change-Id: I637d39f003bd1d507da0b5bb6fa12118040fcd63
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When the sample fails, it's difficult to identify whether it failed
during the configuration or transfer stage. Provide a little more
information which will allude to the nature of the failure.
Change-Id: I5272ce73f56b0e51c8439d5510e512b616665705
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In many cases there is no need to define a macro for printing to
the console, just use the correct variant directly.
Jira: ZEP-240
Change-Id: I9952deda4bfc60424f01fca2443d037562d13d0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this app, since the sensor is not on the
board any more.
Jira: ZEP-763
Change-Id: I931acfe9f01b817bc0b24a4e0745bf759e53da90
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Don't try to detect the UART device manually, the list is missing a
bunch of boards (the Quark SE sensor subsystem variant, and both
Arduino 101 halves). There's a config variable for that.
Change-Id: I903e52dcb6025e5da824faadb5e4bc59221fa210
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This output is going to a terminal device, not a Unix tty descriptor
which will cook the output for us. Newline moves the cursor down.
Carriage return moves it to the start of a line. We need both.
Change-Id: If93d1a85d16cea93b4788fa55e694a7b77055bfe
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
- Set default board to Quark SE Debvboard
Jira: ZEP-690, ZEP-760, ZEP-782
Change-Id: I7f7cc45b527a116f88cf45796e46b429ae6f0060
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change the api argument format following the API
argument definition change in the driver. Some
definitions of CONSTANTs were changed accordingly.
Correct some comment error.
Jira: ZEP-642
Change-Id: I1b34640aa70f1597076e035e2b3b576d8337129a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Baohong Liu