This reverts commit 5e225e0c8b.
Based on #79931 and TSC discussions, it was decided that TinyCrypt
will be deprecated *AFTER* 4.0.
Signed-off-by: Flavio Ceolin <flavio.ceolin@gmail.com>
`chan_type` is defined as a `uint16_t`. This makes checking if it is
< 0 always false. A warning is shown with -Wtype-limits. Remove the
check as it is unnecessary.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The sock_obj_core_dealloc() was not called if close() is called
instead of zsock_close(). This happens if POSIX API is enabled.
Fix this by calling zvfs_close() from zsock_close() and then
pass the socket number to zsock_close_ctx() so that the cleanup
can be done properly.
Reported-by: Andreas Ålgård <aal@ixys.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Apparently, the previous change to fix the chip select only works on
some newer revisions of the LPSPI, and the behavior is different on
older parts like RT. For now put some #ifdef to keep the fixed CS on
MCXN but have the old behavior on RT and other platforms.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This function is only checking for current byte being transmitted.
This patch ensures that function returns `1` until TX is disabled and
no byte is being transmitted.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
ISH SoCs have zero-address memory mapped to I2C0 controller.
Coredump cannot be triggered by zero-address access.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Corrects an issue that was introduced when the interrupt
locking/unlocking was added to the 'sched' benchmark by
unlocking the interrupts before the context switch done by
k_yield(), but after the call to z_unpend_first_thread().
Fixes PR #81050
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
in commit 1cd37f21f3 the global ram console buffer was replaced
with a pointer. This didn't work with the OpenAMP resource table
anymore (#75656).
Signed-off-by: Simon Maurer <mail@maurer.systems>
Updated manifest to include fix for incorrect display of scan
results when APs have EAP and PMF enabled.
Fixes#80995
Signed-off-by: Karun Kumar Eagalapati <karun.kumar@nordicsemi.no>
Some spi drivers do not allow the send buffer
and receive buffer to be empty at the same time,
if this happens it will cause the spi to be unable
to communicate with the nrf7002, so add the receive
buffer for the discard byte in the spim_xfer_rx.
Fix#80686
Signed-off-by: Hongquan Li <hongquan.prog@gmail.com>
We read/modify/write the CH/SECONDS register at initialisation to clear
only the Clock Halt bit and only if it is set.
The previous implementation zeroes the entire register unconditionally at
initialisation, which wipes the SECONDS fields.
Fixes#77354.
Signed-off-by: Andrew Feldhaus <github@feldhaus.co.uk>
Currently RAMABLE_REGION is used for both virtual address (VMA)
and a load address (LMA). It results in wrong LMA for some platforms.
This commits adds using ROMABLE_REGION for LMA.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
To reduce the latency of CPU accessing/modifying SW TCD content, it
better to put TCD pool to DTCM by default.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
New implemented eDMA loop SG mode can be used to lpuart driver to fix
the conflict of "Done" bit issue which cause uart_async_api test failed
when SG mode is enabled.
Also, this loop SG mode works well even with a high bandrate(test done
on 2000000bps).
Fixes: #78291
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
I2S speed test failed because of "Invalid destination address" issue By use
eDMA loop SG mode, this issue is fixed.
Fixes: #70777
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
Existing dynamic SG mode have some issues which cause uart sync api and
I2S speed test failed.
These issues are: a wrong "Done" bit issue found on UART async api
test. An invalid destination address issue found on I2S speed
test. By introducing loop SG mode, these issues are all fixed.
Some data structures are different between eDMA and eDMA V4, use
different macros defined in SDK driver for each of them.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
In the description of the partial-final frame of the SMP UART transport
specification was a typo in the maximum allowed raw body size. The size
must not be larger than MTU - 5 because there are 5 bytes occupied by
total length (2), frame termination (1) and crc (2).
Signed-off-by: Simon Moser <simon.github@mailbox.org>
Responses are currently set to the shell device that was configured
in the device tree.
The shell_uart driver allows for changing it's device during runtime
which leads to a situation where we recieve packets on one device
and respond on another.
This patch causes smp_shell_tx_raw to use the shell_uart device
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
The linker script snippet that places the llext_no_syscall_impl section
has the unfortunate side effect of overwriting the current linker
address. This can lead to unexpected behavior of the caller script.
Saving the current address before defining the section and restoring it
afterwards avoids this issue.
Fixes#81136.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This commit deals with fixing various issues that prevents
the device from being built. In specific:
1. Fix default timing macro definitions to build with
an MSPI controller, other than AMBIG.
Add macro definition for MSPI_PORT.
2. Timing settings should be applied only when MSPI_TIMING
is defined. Otherwise, the APS6404 initialization routine
will fail with -EIO.
3. Similarly, use MSPI_XIP and MSPI_SCRAMBLE to apply XIP
and SCRAMBLE device settings, respectively (optimization).
4. MEMC_INIT_PRIORITY is assigned higher priority than
MSPI_INIT_PRIORITY which results in compiler error as
APS6404 device initialization depends on its underlying
MSPI bus controller.
5. The 'acquire' subroutine should be compiled when PM_DEVICE
is used (suppress compiler warning).
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Adds glob expression triggering CI for *all* changes in boards'
documentation, not just those matching the "*.rst" pattern since there
can also be images being changed without any other change on RST files.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Check the return code of the i2c_target_read/write callback function
is 0 before continuing the transmit/receive operation on I2C target
When Transmitting: 0 if data has been provided, then continue
When address matches: 0 if the write is accepted or
if more data can be requested depending on the transfer direction.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
If we could not fragment the IPv6 packet, then drop it and do
not try to send it. Let the upper layer re-send the packet if
needed. It is causing more trouble if we try to send the packet
and not honor the MTU setting.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we could not fragment the IPv4 packet, then drop it and do
not try to send it. Let the upper layer re-send the packet if
needed. It is causing more trouble if we try to send the packet
and not honor the MTU setting.
Fixes#81021
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
nRF70 recovery relies on power-management feature which isn't applicable
for SAP, so, we keep seeing false recovery causing interface restart.
Disabled recovery for SAP to fix the issue.
Fixes#81130.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
SNTP simple runs request iterations with exponential backoff.
If the net interface is a slower connection (ie. CAT M1 modems)
then the request will be sent but the response may take time to
be received, thus causing a timeout and another request to be sent.
Because of the nature of UDP and the fact that the same socket
(source IP/port combo) is being used for both requests, a delayed
response to the first request can be received as the response to the
second request, causing -EINVAL to be returned when the timestamps
mismatch (see subsys/net/lib/sntp/sntp.c). The solution provided
retries receiving the response when the timestamp is mismatched
(without sending an additional request).
Signed-off-by: Marcus Penate <marcus.penate@ellenbytech.com>
Refactored the structure of the troubleshooting section so it
is more similar to how e.g. the ArchWiki lists troubleshooting
entries, which makes it easier to search for and separate
each entry.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The exisitng documentation was out of date and
possibly not working.
Added a section on how to use NAT and port forwarding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The documentation guidelines have a specified order of
header underlines that this file did not follow.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes overlay configuration to allow running the test on CI without
externally connecting two pins.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Fix missing input/output enable flags on pinctrl macro, which
wouldn't allow for driver to see and apply flags configuration
made in the device tree.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Updates and fixes to support IPM sample on ESP32:
- fix IPM sample code for APPCPU and PROCPU
- align with memory layout, add flash awarenes
- shell commands to stop/start APPCPU
- reorganize overlays
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Updates and fixes to support APPCPU.
- fix ld scripts
- fix and update memory layout
- fix build issues
- fix sysbuild
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Fix missing flash and code partition.
Add missing dts entries and use common partition tables to all related
non-Espressif boards, previously ommited.
Add uart1 node in pinctrl for APPCPU.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Align the shared memories with the memory.h layout.
Reorder nodes to show memory related nodes together.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Twister's extra arguments feature only works correctly if the fully
qualified platform name is given, which was not the case. Make all
platform names for the shield testcase fully qualified to resolve this.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Flavio Ceolin