A debug server might want to redirect outgoing characters on the console
to another output if it piggybacks on the serial line normally reserved
for the console.
Change-Id: I534f5b35456306940a3926f52fe5cce2d5c94da4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The @file tag should follow by a file (or nothing for current file),
instead of file description. Fix it by separating the description.
Change-Id: Iabe3550568cdfdda6ad71be6fab3e8b5dfbeb940
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is a complete new cc2520 driver for zephyr. Intention is to fit
better within Zephyr device driver model.
- It's (almost*) ready to be instanciated as many times as necessary
- It's fully interrupt based on SFD and FIFOP (no pin polling)
- It's nicer to other sub-systems (it sleeps, no busy-wait loop)
- It still loosely complies to old legacy radio device driver model
*: GPIO API needs to be fixed in order to accept multiple callbacks, as
well as enabling callbacks to retrieve private data.
Notes:
- Hardware filtering does not work yet as the net stack, above, needs to
provide the relevant information for it (src/dst ieee802154 extended
addresses, short addresses...)
- A embryo of generic functions (txpower, channel, addresses...)
have been implemented but don't belong yet to any radio device driver
model. Such new driver model will come afterwards (soon?)
- SPI API would need to be improved to avoid as much as possible memcpy
as well as spi_slave_select() call.
Change-Id: I1fd6dfff28fba3984f6006d394ea12f1e763ac18
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ieee802154 is a more relevant name. Applying the change in
include/drivers as well.
Change-Id: I7f7188ed0421045d7667303c375eeb8af1298b97
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The patch adds a driver for STM32F10x series RCC (Reset and Clock
Control) subsystem.
The module is primarily responsible for setting up of MCU's clock
tree. In particular the driver sets up SYSCLK, PLL (with source
configuration), AHB prescaler, and APB1/APB2 prescalers. As part of this
functionality, the subsystem can enable/disable clock signal for
particular peripherals, thus reducing the power consumption of the MCU.
The driver implements clock control driver API. However, subsystem IDs
being HW specific are exposed in driver public header that must be
included by callers. The driver registers a single device using a common
name STM32_CLOCK_CONTROL_NAME. The device is initialized at
the PRIMARY level with priority 1. This allows the initialization to
take place right after SoC initialization routine.
The driver depends on selection of SOC_STM32F1X config option and is MCU
specific.
Change-Id: I8bea5db20726a24bce7b7ffe0b95de543240429a
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Support for Freescale/NXP K64 SPI modules, limited to:
- Master mode
- A single active set of clock and transfer attributes (CTAR0), which
includes non-adjustable delay parameters
- Tx FIFO fill and Rx FIFO drain interrupt handling
- Standard, continuous select and continuous SCK SPI transfer formats
Also, divide-by-zero code generation in this driver is prevented.
The 'volatile' attribute is added to some of the variables in the baud
rate and delay calculation functions of the K64 SPI driver in order to
prevent bad code generation by gcc toolchains for ARM seen when an
optimization setting above -O0 is used.
Specifically, a register is loaded with the constant 0 and is used as
the divisor in a following divide instruction, resulting in a
divide-by-zero exception.
This issue has been seen with gcc versions 4.8.1 (the VxWorks toolchain)
and 5.2.0 (the Zephyr SDK toolchain).
Change-Id: Ib5b2b748aad8fdfd5e8d40544e6e1abef3713abe
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
This function doesn't return number of bytes sent but error code.
Change-Id: Ife5e4d3957226ce2b4283b5d229095db2ac375dc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The peripherals utilizing UART were required to register their own
ISR rountines. This means that all those peripherals drivers need
to know which IRQ line is attached to a UART controller, and all
the other config values required to register a ISR. This causes
scalibility issue as every board and peripherals have to define
those values.
Another reason for this patch is to support virtual serial ports.
Virtual serial ports do not have physical interrupt lines to
attach, and thus would not work.
This patch adds a simple callback mechanism, which calls a function
when UART interrupts are triggered. The low level plumbing still needs
to be done by the peripheral drivers, as these drivers may need to
access low level capability of UART to function correctly. This simply
moves the interrupt setup into the UART drivers themselves. By doing
this, the peripheral drivers do not need to know all the config values
to properly setup the interrupts and attaching the ISR. One drawback
is that this adds to the interrupt latency.
Note that this patch breaks backward compatibility in terms of
setting up interrupt for UART controller. How to use UART is still
the same.
This also addresses the following issues:
() UART driver for Atmel SAM3 currently does not support interrupts.
So remove the code from vector table. This will be updated when
there is interrupt support for the driver.
() Corrected some config options for Stellaris UART driver.
This was tested with samples/shell on Arduino 101, and on QEMU
(Cortex-M3 and x86).
Origin: original code
Change-Id: Ib4593d8ccd711f4e97d388c7293205d213be1aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is a prologue to reverting:
commit 3c66686
Author: Benjamin Walsh <benjamin.walsh@windriver.com>
Date: Tue Feb 9 17:34:02 2016 -0500
sys_clock: start the microkernel ticker in the MICROKERNEL init level
to allow the devices initializing in pre-MICROKERNEL init levels to poll
the hi-res clock (sys_cycle_get_32()), which relies on the system clock
having been started.
This change allows starting the system clock in the NANOKERNEL init
level by delaying announcing the ticks until the MICROKERNEL init level.
Change-Id: I43d54bb5e2f182d4edd880da0124a0817f911943
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Summary lines follow the @brief tag instead of the @file tag.
This prevents doxygen build warnings such as ...
The name xxx supplied as the second argument in the \file
statement is not an input file
Change-Id: I1014586ad21be12e14aa1d2a942e6b8a11211795
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Modifications to timer drivers and interrupt setup, to manage
the tickless idle for the x86 architecture
Change-Id: Ie02d484b7e5636de6ea382ba2eeed57e704c8498
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
FIFOP setting is a wrong assumption to know if radio is on.
Transmission runs on clock basis instead of pre-set loop counter. Thus
removing useless config option relevantly as well.
Opmitizing a bit the code as well, and making cc2520_on() public for
testing purpose.
Change-Id: I4495d1d6c19d10dcbc18f7e2fd5041720ec1f438
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Integrating it into network stack. Centralizing all in drivers/802.15.4
Change-Id: Ia2916ff652afe5fe736f6560c2ed4a911a5f0679
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
The code to poke the system integration module to disable clock gating
for UARTs only works for UART0-3 since all the bits are in the same
register. However, clocks for UART4 and UART5 are controlled by
another register. This means that we have been writing to the wrong
bit for enabling UART4.
This patch fixes this issue, and moves the clock gating clock into
board initialization. The incorrect code has also been removed to
prevent accidental mis-use. The dev_data struct is no longer needed
for uart_k20, so that is removed as well.
Change-Id: I67845a417e43647bf0ffcbdbda34ce68fa887713
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for compilers conforming to the IAMCU calling convention
as documented by
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
Change-Id: I6fd9d5bede0538b2049772e3850a5940c5dd911e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
All of these stubs at the end pop the stack and tell the LOAPIC
that we are at EOI. Put this in common code which falls through to
_IntExit(). Saves 8 bytes per static IRQ stub. There is also small
constant savings in the common code for dynamic IRQs.
Change-Id: If17e9f105928a4251a2cb3fc0d192649c1c4d84b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Quark SE Lakemont core has a hardware bug where the LOAPIC does
not properly notify the IOAPIC to clear the IRR bit for level-
triggered interrupts.
This patch introduces a workaround where the vector ID of the
in-service interrupt is manually written to the IOAPIC_EOI
register, resulting in the bit being cleared.
Unfortunately, in the context where EOI happens it's very difficult
to identify which IRQ line is being serviced, so this is done
unconditionally for all interrupts vectors whether they are registered
in the IOAPIC RTE table or not.
Change-Id: I639cd258dec4f50934e17eadbb821e6a7112e636
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was only needed for an older implementation of software interrupts,
now superseded by the irq_offload() API (which doesn't interact with
the interrupt controller at all)
Change-Id: I8aa696d370ae1799872f6d70de69f3cb5b47456a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Other internal functions are shown in this header, no reason to
keep this a secret.
Change-Id: Icb7d36206148c281f1960d1ac10368d9bb3033f1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Those empty C files are there because the current Kbuild
requires Makefile to be present at those directories,
(due to arch/x86/Kbuild), which requires building some object
files. So the empty source files are there to produce empty
object files to satisfy this.
Change-Id: I14056347ea14cff227d9e8960192e8673c0019b8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Change-Id: I1d379068f64855d5d4595838040ec50f97f638a0
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The initialization code and macros are the same. So extracts it
and puts it into the driver. This is another step to follow
the driver model.
Change-Id: I1af8b2888779b2b58367feaff9ee1a6d97b4873c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It's very rare to have lines exceeding 100 characters (default console
width being 80) so 1024 is quite overkill. Even 256 is probably more
than anyone will need any time soon, but if that becomes an issue this
define can be converted to a Kconfig option in the future.
Change-Id: If5fd324b17a0e8ef7b39ea7cc6624739d0241cac
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The content of include/drivers/hpet.h is really private to
the driver and does not need to be exposed in public include
directory. So move the content into driver code.
Change-Id: Ica442e43c480a6b079b8d3c4e75e67adcfd0ba6b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
() Rename nsim_uart.c to uart_nsim.c. This is to follow
the driver naming convention.
() Rename functions nsim_uart_*() to uart_nsim_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: If015f39a6f6b4fcc65625e6e5f973b4469202f54
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Rename k20UartDrv.c to uart_k20.c. This is to follow the driver
naming convention.
() Move driver/serial/k20_uart.h to drivers/serial/uart_k20_priv.h
as this contains definitions private to the driver, and
should not be exposed in public include directory.
() Rename functions k20_uart_*() to uart_k20_*(), following
driver naming convention.
() Renames CONFIG_K20_UART_* to CONFIG_UART_K20_*
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: If1be1fde083aba6ff68062db2059aef08617a286
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Renames _sys_clock_cycle_get() (provided by the timer driver)
to sys_cycle_get_32(). It is the preferred method to read the
hardware clock.
Change-Id: Ifea5213d8c04a8bf7b9114b048c5db0ccee61549
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces microkernel global variable _k_sys_clock_tick_count with the
global variable _sys_clock_tick_count. This allows both the microkernel
and the nanokernel to use the same variable to track system clock ticks
instead of using two different ones.
Change-Id: Ia4eebf022f59d130ad1882e0e550016527543a45
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the type of global variable _sys_idle_elapsed_ticks such that
both its nanokernel and microkernel definitions are of the same
type--int32_t.
One of the repercussions of this is that code related to the routine
_nano_sys_clock_tick_announce() does not need the application of
typecasting.
Change-Id: I3d7374cd1a32aea7e4651726febde74ebe4ac8ac
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Improves documentation consistency by using "N/A" instead of "None"
when the routine does not return a value.
Change-Id: I429a159b3037742cbc431db0cb4828ab9d6d35c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This module is based on the standard Local APIC and IO APIC source modules.
This modules combines these modules into one source module that exports the
same APIs defined by the Local APIC and IO APIC header modules. These
routine have been adapted for the Quark D2000 Interrupt Controller which has
a cutdown implementation of the Local APIC & IO APIC register sets.
Change-Id: Ic80aa78918483663d76054ebadefa08d8a3f188a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Quark SE provides various clock controllers through its SCSS block.
Peripheral, external, sensor, and others.
This current drivers provides only the clock gating capability, for
peripheral, external and sensor. But it could support divider and more
other features once defined in the generic API.
Note: such clock has _nothing_ to do with a Real Time Clock (RTC).
An RTC provide clock timing like a watch would do. Here the clock
controller is about circuit clocking.
Change-Id: I1a365ae730dfc6be7686271f7fbb693e64a6ff6f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
__unused is define in sys/cdefs.h when building against newlib.
Change-Id: I0fad81dc91e1eb91368b5b3370e3fbb0fb7ba4a9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Rename them to SYSTEM_CLOCK_DISABLE and sys_clock_disable to put
the symbols in the proper namespace and to align with the rest of
the timer APIs.
Change-Id: I341cdb1bd6cc01e5662d8526c293d4e0acd6ec24
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
We generally call this in interrupt code, and since it's just a register
write, get rid of all the function call overhead.
Change-Id: I251fa3cee0841fcdd8eecc7941d4d3782d112e66
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are interested in supporting some XIP x86 platforms which are
unable to fetch CPU instructions from system RAM. This requires
refactoring our dynamic IRQ/exc code which currently synthesizes
assembly language instructions to create IRQ stubs on-the-fly.
Instead, a new approach is taken. Given that the configuration at
build time specifies the number of required stubs, use this
to generate a build time a set of tiny stub functions which simply
push a 'stub id' and then call common dynamic interrupt code.
The handler function and handler argument is saved in a table keyed by
this stub id.
CONFIG_EOI_HANDLER_SUPPORTED removed, the code hasn't been conditionally
compiled for some time and in all cases we call _loapic_eoi() when
finished with an interrupt.
Some other out-of-date verbiage in comments related to supporting
non-APIC removed.
Previously, when dynamic exceptions were created a pointer would
be passed in by the caller reserving ram for the stub code. Since
this is no longer feasible, two new Kconfig options have been added.
CONFIG_NUM_DYNAMIC_EXC_STUBS and CONFIG_NUM_DYNAMIC_EXC_NO_ERR_STUBS
control how many stubs are created for exceptions that push
an error code, and no error code, respectively.
SW Interrupts are no longer triggered by "int <vector>" hard-coded
assembly instructions. Instead this is done by sending a self-directed
inter-processor interrupt from the LOAPIC, using a new API
loapic_int_vect_trigger(). In this way we get rid of dynamically
generated code in irq_test_common.h.
All interrupts call _loapic_eoi() when finished, since this is now
the right thing to do for all IRQs, including SW interrupts.
_irq_handler_set() for x86 no longer requires the old function pointer
to be supplied.
Change-Id: I78993d3d00dd153c9051c518b417cce8d3acee9e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The tick event is now generated by calling the standard API for
signalling an event from an ISR. (This allows the tick event
to be generated properly even if the internal implementation of
the event sub-system changes.)
Change-Id: Ia2be3874358acb0ea2b2d2bbefbe4603fe11da8a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Removing many of the typedefs that are only used once to lessen the
checkpatch warning about creating new typedefs. A handful have been
behind as they would require a more invasive change to the code. It
has yet to be determined if this is a worthwhile endavour.
Change-Id: Ibeb29e0a1d37e8121218fccf0d986cbebd226e85
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This patch adds the pci_enable_bus_master function that enables bus
master access for a PCI device.
Change-Id: I317daac1a613ccfc5a3894332c1a7dbbff05991f
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Includes device.h to prevent potential compiler warnings due to use of
'struct device *' in _ioapic_init() declaration.
Change-Id: Iabd97c09385044a3742658f66a79be969b62852a
Work-by: Johan Kruger <johan.kruger@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This was only needed for the older 8259A style PICs which are no
longer supported.
Since we now just support APIC, we always just call loapic_eoi which
no longer requires an argument and informs the IOAPIC that the interrupt
is complete if necessary.
Change-Id: I15c9b7b4f03b872656220af32220b62e043bfa6b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Benjamin Walsh