Looking at all structs as to where we can pack them a little better, and
calling out the padding/stride at the end for future expansion.
Change-Id: I4a651092e950dd3d915af9fa0ee0d7d59803e58f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per Curie documentation, the first sample from the Quark SE ADC
hardware after reset needs to be dropped.
This commits changes the location and the trigger event to do
a dummy read that drops the first sample.
Originally the driver did the dummy read on the API call enable()
and it was triggered if the ADC had awakened from suspend mode.
Because the SoC is not in suspend mode on power on and the API
enable() call has no information on the channels to be read the
dummy read could be missed.
Now the dummy read is done on the API call to read()
and triggered if it is the first time read() is called
since power on.
Change-Id: I1e1ad5f7f44d71ca88572ae242ad629471a9ab9b
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit changes the behavior of the driver when it reports
buffer results back through the callback.
Originally, the driver reported a callback after each sequence
table round signaled by an interrupt. If in repetitive mode,
each reported result was put in the next buffer element,
which was considered circular, and reported back with callback.
Now the behavior changes. If in repetitive mode, each sequence table
round reported by an interruption puts the data in next element of
the reception buffer. The callback reports back once the buffer is
fulled and stops the sampling process.
Change-Id: I3707574cfaf5dfc874473f38c5dfa88dd392133d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
On Curie SoC the ADC must always be configured in single ended mode.
Change-Id: Ie59b4180358153865c961b66f98321db60d4269f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
ADC DW IP requires a calibration process each time the
IP recovers from a deep power down mode.
Change-Id: I2e02d1987af9addd9cb08a4e4e8d3848ad5b623c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ADC allows to program repetitives sampling after a read request.
User should be able to provide buffers for each table entry that can
hold subsequente repetitive samples.
Change-Id: I75da4a480a0e3f241d9276cf4fe3999a9cfbba2c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Buffer management on dw driver was too complex.
New buffer management follows the following behavior.
- Each sequence entry have one sample at a time.
- Each sequence entry have a buffer to store that sample.
- If ADC have repetitive sampling configuration, the buffer value
is overwritten with the new value.
New buffer management allow us to remove Synposys'
files and license headers as well.
Change-Id: I75bbbee59bea400839bb34ca1fcb2111073f99d0
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adapts IRQ macro calls for the new IRQ static support convention
on ARC.
The new IRQ_CONNECT macro requires to receive the irq numbers without
parenthesis around. This is needed to execute preprocesor substitution
correctly.
Change-Id: I318cb7916b6c3ff3a92b4d2e5a13379f8eed0b4e
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Synopsys source code for the arc ADC driver.
Change-Id: I140a63505685cda8ec9d3174b7cf4fc1e2e91b06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Dan Kalowsky