The pinmux base address and number of pins are now defined in SoC or board
header files instead of specifying them in kconfig. This is because
the pinmux ties directly to the SoC (or board expanders) so the base
address and number of pins do not need to be configurable in kconfig.
Change-Id: Ib6090d7d022b491f3fe8f522858281504c6302bb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enable 72MHz SYSCLK by default. We use the fact that there is an
on-board 8MHz quartz oscillator available as HSE clock signal. Make sure
not to exceed 36MHz clock limit on APB1.
Change-Id: I9ebc2144910253e68cd8a9b078884852f01c2cab
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Introduce configuration for STM32 MINI A15 embedded development
board. The board has a STM32F103VET6 MCU on board. The MCU has 64KB of
SRAM and 512KB of flash.
The board has the following peripherals:
- RS232 port on DB9 connector, connecting to USART1, pin mapping:
- PA9-US1-TX
- PA10-US1-RX
- a LED diode (U2) connected to pin PB5
- micro SD card connector with pin mapping:
- PC8-SDIO-D0
- PC9-SDIO-D1
- PC10-SDIO-D2
- PC11-SDIO-D3
- PC12-SDIO-CK
- PD2-SDIO-CMD
- on board SPI flash AT45DB161D-SU, pin mapping;
- PA4-SPI1-NSS
- PA5-SPI1-SCK
- PA6-SPI1-MISO
- PA7-SPI1-MOSI
- button (K1), connecting PB15 to GND
- 40-pin header connector XS5
Change-Id: Ia378b105abb25fb589a100185ea96512a5f98cf3
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Daniel Leung