The struct _caller_saved is not used. Most architectures put
automatically the registers onto stack, in others architectures the
exception code does it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The struct _kernel_ach exists only because ARC' s port needed it, in
all other ports this was defined as an empty struct. Turns out that
this struct is not required even for ARC anymore, this is a legacy
code from nanokernel time.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Architecture defconfigs are not used anymore and are stale. Remove them
to avoid confusion.
Related to #14442
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The Kconfig sybmol referenced in the comment is called
CONFIG_RISCV_SOC_CONTEXT_SAVE not CONFIG_RISCV_SOC_CONTEXT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Borrow from an Arm Cortex-M convention where each Kconfig.soc can
define a 'config WDOG_INIT' that does watchdog initialization early in
the boot process if that SoC needs it.
Some SoCs have watchdogs that are enabled by default and need to be
turned off during reset handling (to be re-enabled if necessary by a
Zephyr watchdog driver).
Signed-off-by: Marti Bolivar <marti@foundries.io>
A couple of follow-on patches suggested after previous RISCV32 arch
changes were merged.
Tweak some help in arch/riscv32/kconfig to better work with the RST
docs.
Take out all the CONFIG_PRINTK ifdeffery in fatal.c. The cause_str()
routine should get compiled out if PRINTK=n anyway.
Signed-off-by: Marti Bolivar <marti@foundries.io>
RISC-V permits myriad extensions to the ISA, any of which may imply
additional context that must be saved and restored on ISR entry and
exit. The current in-tree example is the Pulpino core, which has extra
registers used by ISA extensions for running loops that shouldn't get
clobbered by an ISR.
This is currently supported by including pulpino-specific definitions
in the generic architecture code. This works, but it's a bit inelegant
and is something of a layering violation. A more generic mechanism is
required to support other RISC-V SoCs with similar requirements
without cluttering the arch code too much.
Provide that by extending the semantics of the existing
CONFIG_RISCV_SOC_CONTEXT_SAVE option to allow other SoCs to allocate
space for saving and restoring their own state, promoting the
currently pulpino-specific __soc_save_context / __soc_restore_context
routines to a RISC-V arch API.
The cost of making this generic is two more instructions in each ISR
to pass the SoC specific context to these routines in a0 rather than
just assuming the stack points to the right place. This is minimal,
and should have been done anyway to keep with the ABI.
As a first (and currently only in-tree) customer, convert the Pulpino
SoC code to this new mechanism.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The way that CONFIG_EXECUTION_BENCHMARKING=y is handled on this
architecture is incorrect. The goals are:
- call read_timer_start_of_isr() as close as possible to the
beginning of the ISR
- call read_timer_end_of_isr() after all preparations have
been made to call the driver-level IRQ handler, but it hasn't
been called yet
The current implementation could cause kernel crashes, though.
The read_timer_start_of_isr() call is made before saving MEPC or any
SoC-specific context. The MEPC issue is not that big of a deal, but
doing it before saving SoC context could clobber state that hasn't
been saved yet and corrupt the kernel.
One example is a pulpino style RISC-V SoC. Some Pulpino cores have
extra registers that are used for ISA extensions used to generate code
for C loops. There's no guarantee read_timer_start_of_isr() will never
have a loop inside: in fact, the RISC-V User-Level ISA v2.2 explicitly
recommends using a loop to get the 64-bit value of the "cycle" CSR. A
Pulpino-like SoC with a cycle CSR could thus naturally have a
read_timer_start_of_isr() implementation that involves loops. Saving
the loop state before reading the timer would then be needed.
Fix this issue by moving the call to read_timer_start_of_isr to after
all context saving is done. (This is a fairer comparison to Arm
Cortex-M SoCs anyway, since register stacking is performed in hardware
on Cortex M and is done before the first ISR instruction executes.)
The call to read_timer_end_of_isr() has an issue as well: it's called
after the ISR's argument has been stored in a0 and the ISR address is
in t1, but before actually calling the ISR itself.
In the standard RV32I calling convention, both t1 and a0 are caller
saved, so read_timer_end_of_isr() is within its rights to set them to
any garbage, which we'll happily treat as a function and its argument
and execute.
Avoid that possibility by saving the register values to the stack in
this configuration.
Signed-off-by: Marti Bolivar <marti@foundries.io>
The generated stub doesn't actually initialize the CPU or jump to
__start. All it does is set up the interrupt stack and jump to
_PrepC. Fix the help.
Signed-off-by: Marti Bolivar <marti@foundries.io>
If CONFIG_PRINTK=n, cause_str will not be defined, and _Fault() will
fail to build. Fix that by ifdeffing out the printk call in that case.
Signed-off-by: Marti Bolivar <marti@foundries.io>
There were many platforms where this function was doing nothing. Just
merging its functionality with _PrepC function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
struct k_thread already has a pointer type k_tid_t, there is no need for
this definition to tcs.
Less symbols/names make the code cleaner and more readable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Always compare unsigned interger type with another unsigned
integer type. Currently in nios2, posix, riscv32, x86 and xtensa
we were comparing the _kernel.nested variable with a signed
interger type. Fixed this violation.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Instead of checking every time we hit the low-level context switch
path to see if the new thread has a "partner" with which it needs to
share time, just run the slice timer always and reset it from the
scheduler at the points where it has already decided a switch needs to
happen. In TICKLESS_KERNEL situations, we pay the cost of extra timer
interrupts at ~10Hz or whatever, which is low (note also that this
kind of regular wakeup architecture is required on SMP anyway so the
scheduler can "notice" threads scheduled by other CPUs). Advantages:
1. Much simpler logic. Significantly smaller code. No variance or
dependence on tickless modes or timer driver (beyond setting a
simple timeout).
2. No arch-specific assembly integration with _Swap() needed
3. Better performance on many workloads, as the accounting now happens
at most once per timer interrupt (~5 Hz) and true rescheduling and
not on every unrelated context switch and interrupt return.
4. It's SMP-safe. The previous scheme kept the slice ticks as a
global variable, which was an unnoticed bug.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Added LOG_PANIC to fault handlers to ensure that log is flush and
logger processes messages in a blocking way in fault handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rather than do that for each architecture, source SoC Kconfigs where the
code is maintained, under ZEPHYR_BASE/soc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch provides support needed to get timing related
information from riscv32 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
FE310 is the name of one SoC out of a range of products in the SiFive
Freedom line. The FE310 SoC port in Zephyr is compatible with all of
these products, so rename the SoC to SiFive Freedom
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Move the MEPC increment logic in __irq_wrapper such that the saved MEPC
is only incremented on a syscall (ecall instruction).
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds support for Microsemi Mi-V RISC-V softcore CPU
running on the M2GL025 IGLOO2 FPGA development board.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
This commit moves code from fe310 platform into RISC-V privilege common
folder. This way the code can be reused by other platforms in future.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The metairq feature exposed the fact that all of our arch code (and a
few mistaken spots in the scheduler too) was trying to interpret
"preemptible" threads independently.
As of the scheduler rewrite, that logic is entirely within sched.c and
doing it externally is redundant. And now that "cooperative" threads
can be preempted, it's wrong and produces test failures when used with
metairq threads.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix the ns16550 uart driver and relevant SoCs accordingly.
All generic settings are now DTS based.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Until now, Zephyr has used a patched Kconfiglib that turns 'source' into
a globbing source (by replacing 'source' with 'gsource' at the token
level). There's two problems with this:
- The patch needs to be maintained separately
- Misspelled filenames are silently ignored, as they look like glob
patterns that don't match anything
Fix it as follows:
1. Replace all 'source' statements that use wildcards with 'gsource'
2. Remove the custom Kconfiglib patch so that 'source' no longer globs
The sed pattern '/source.*[*?]/s/source/gsource/' was run over all
Kconfig* files to do the replacement.
source's that use environment variables that might contain glob patterns
were manually changed to gsource.
Building the docs in doc/ is a good test, as doc/Makefile deliberately
sets the environment variables to glob up as many Kconfig files as
possible.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename the nano_internal.h to kernel_internal.h and modify the
header file name accordingly wherever it is used.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Flavio Ceolin