Replace CONFIG_WDT_0_NAME with DT_ALIAS_WATCHDOG_0_LABEL in samples and
test code. Now that all drivers are DT aware we don't ever set the
Kconfig option.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update lis3mdl-magn dts binding to include GPIO interrupt pin and change
driver code to get the GPIO pin and controller info from DT instead of
Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Parse output of test to verify success, this was previously treated as a
test and now it is using the console handler, so we need to verify
success using regex.
Fixes: #20177
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous defconfig for dma is DMA_STM32F4X in this board, while the new
generic driver uses DMA_STM32 to enable DMA support, and also dma driver
of stm32 now needs HEAP_MEM_POOL_SIZE to be big enough to hold dma
stream instances.
Additional .conf files are added for also adding HEAP_MEM_POOL_SIZE
configuration to two test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Tests fail with the default 512 byte main stack size. Increase it
just as the idle stack size has been increased over default.
Closes#20202
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Updated tests/crypto/rand32/ to include cryptographic test cases.
Added config file for rand32_ctr_drbg generator.
Signed-off-by: David Leach <david.leach@nxp.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
convert sample and test yaml filters that utilize a DT_ define to
instead use a dt_ function. The intent is to remove the Kconfig
generated DT defines and just make directy queries into the device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Using a device with a kernel clock below 1MHz (e.g. nRF52) resulted in
a division by zero. Added support for such devices by multiplying
before dividing.
Signed-off-by: Mario Noseda <mario.noseda@zhaw.ch>
Some cleanup in tests code as after duplicates filtering
was introduced there is no need to interpret 0-length readout in
settings h_set handler
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added a Kconfig option to disable Zephyrs cpp implementation for
operator new, delete, pure virtual functions and vtables.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Confirm that std::make_unique<> functions as intended. This is an
indirect test of new/delete using best-practices API.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
the following compile warning will fail the CI:
/zephyr/tests/kernel/fp_sharing/generic/src/float_regs_arc_gcc.h:
41:8: error: /unused variable 'temp' [-Werror=unused-variable]
/zephyr/tests/kernel/fp_sharing/generic/src/float_regs_arc_gcc.h:
75:8: error: /unused variable 'temp' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Unused since commit f3f8f96842 ("tests: i2c_slave_spi: update to
proposed DT compatible naming").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This commit adds a new test suite in tests/arch/arm that
intends to testing system faults inside interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The build scripts for the tests/crypto/rand32 test has been invoking
'zephyr_include_directories' in an invalid way. They have presumably
been trying to modify the 'app' library, but have in effect being
modifying the global environment, in an invalid way nonetheless.
This patch fixes the build script to modify the 'app' library only.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
After run Sanitycheck script I found out that some test cases
have the same test case name in the test result .xml file.
To get rid of it, I decided to change test cases names
for the kernel tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Some test cases have the same test case name.
To get rid of it, I decided to change test cases names
contained same names.
Please check my logic, how I give them names.
Usually trying to give name same as a directory folder.
There are still more test cases which necessary to change,
but I will make changes by small steps.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Test case arch.interrupt have same test case name
for different architectures. To get rid of it,
I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The k_thread_state_str is a new function added into
kernel/thread.c recently which was used to return
the human friendly thread state, so it hasn't been
called by other existing code.
In order to improve the function code coverage, we
just replace the "th->base.thread_state & _THREAD_PENDING"
code by using k_thread_state_str function in
tests/kernel/sched/preempt/src/main.c, because
k_thread_state_str function is realized by judging
the thread_state member to return the thread state.
Signed-off-by: peng1 chen <peng1.chen@intel.com>
Move to using DT define instead of a Kconfig param, also remove unused
I2C Kconfig params for this test.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This test seems a little confused.
Adjust the calibration to allow 110ms sleeps to avoid error
during automated testing.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This test case is has a tolerance of 1ms, but systems with a tick slower
than 1000 ticks/sec may spil outside the 1ms tolerance.
Tolerance adapts to system's ticks/sec, e.g. QEMU targets have
100ticks/sec -> tolerance is 10ms.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
We don't have to build an image for running test timeutil. We
can just build a native app to test it. So move it into "unit"
directory.
Also, add 64-bit support for unit testing framework.
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
After run Sanitycheck script I found out that test cases
had the same test case name in the test result .xml file.
For board itodk in .xml file was duplicated kernel.common test.
To get rid of it, I decided to change test cases names
for the kernel tests, contained name kernel.common.
Now only one test has kernel.common test name,
and will be no duplicated test cases names in the future.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The current implementation of kernel interrupt tests incorrectly
infers NVIC, which is specific to Cortex-M, from CONFIG_ARM.
This commit fixes such incorrect NVIC inferences by using
CONFIG_CPU_CORTEX_M instead of CONFIG_ARM.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Unused since commit 6fd6b7e50a ("xtensa: remove legacy arch
implementation").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
NVS back-end initialization should fetch size of the flash erase blocks
from the flash API instead of DT. This allows to work well when used
storage partition is not located in embedded memory.
NVS back-end sector multiplier configuration was set to 8K as
DT value for native posix targets
flash sector sizes is 1 B, while its flash driver supports 8k.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Stops leaking very long source paths in build directories; makes them
deterministic. Finishes what was started in commit b4282bf72d, see
rationale and code reviews there.
See also CMake issue https://gitlab.kitware.com/cmake/cmake/issues/19475
for more details.
Use the opportunity to remove the most obvious duplication.
Test with: sanitycheck -T $ZEPHYR_BASE/tests/subsys/settings/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If the ICMPv6 test is run in real hw, we need a bit more buffers
to pass the test.
Fixes#19915
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
* add the case for ARC in yaml after dynamic and direct irq are
supported
* fix the bug that index in sw_isr_table should have a offset of
CONFIG_GEN_IRQ_START_VECTOR
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit fixes the FCB delete test after PR #19541.
Now the entity callback is not called on deleted element.
Issue: #19963
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Stack size might be too small when running the test in real
board like sam-e70.
Fixes#19914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Work in topic-gpio to convert drivers to properly use devicetree flag
settings requires that these be defined so sanitycheck can find them.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
After run Sanitycheck script I found out that
some test cases have a same test case name
in the test result .xml file.
For boards mimxrt1050_evk, qemu_x86, sam_e70_xplained
in .xml files that cases were dublicated.
Problem happened only with cases net.dns.no_ipv6.init
and net.dns.init. Only that cases were dublicated.
To solve it, I decided to change test cases names for the dns tests.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This commit enables running the test in CI for nRF51-based
platforms, which require special IRQ lines for the IRQs
used in the test. An additional customization is needed
for QEMU_CORTEX_M0, which uses a different system timer
based on TIMER0 peripheral.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables running the test in CI for Cortex-M Baseline
architecture. As STIR register is not present in Baseline cores,
we need a minor modification in the test code so it uses NVIC
intrisics instead of setting the STIR for ARMv6-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Kumar Gala