Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Added mimxrt1040_evk to inregration platforms, so that fxls8974 is tested,
and added config for mimxrt1040_evk to sensor_shell
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add acmp pinctrl configuration to support ACMP driver for NXP frdm_ke17z
and frdm_ke17z512, tested 'sample.sensor.mcux_acmp' case.
Update the index.rst to add acmp description for ke17z.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
The accel_polling sample uses various sensor, but doesn't set a sampling
rate. But some sensors (like st,lsm6dso) have a default sampling
frequency of 0. So, depending on the sensor, the sample may not always
work.
There are two ways to fix this: either all drivers must set a valid
sampling rate, or the sample shall at least try to set a value if there
is none.
We propose here the second approach, wich should allow the sample to
work on more sensors out of the box.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Docs now start at a high level, discussing sensors, attributes,
channels, and reading data from them.
Followed by more detailed usage guides in how to solve common problems
sensor users may run into.
Additionally renames the sensor_api sphinx tag to sensor
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Recent PR turned on test case for twister which revieled a bug
with building the test case for RT1050 EVK. The touch_controller
DTS node was removed a by commit 57ad325e and further deprecated
by bde07beb5 when the platform was converted to tread displays as
shields.
Signed-off-by: David Leach <david.leach@nxp.com>
At least for nrf boards, the emulation timer settings generate
reading around -60 degrees. Verify that value with some threshold.
Delay the first reading to prevent 0 at the beginning.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
The test `sample.sensor.shell.pytest` fails althought the output
is correct. Time to execution is not enough.
This change extend test execution timeout.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
The #73619 which fixes the atmel,sam-tc-qdec sensor implementation
introduced agregression on the sample test removing the harness
console. That changed the test to use the default ztest behaviour
which is incompatible with the test outpout. This restore the
harness to the default console value.
Fixes: #74531
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current atmel,sam-tc-qdec sensor implementation shared the timer
counter node. This create issues when users wants define both modes.
The current proposal changes the qdec dedinition to be a child of
tc and refactor all the chain of definitions.
Fixes#71312
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add a fixture to run the sample only when the DHT sensor
HX330x is present (shield) on the nucleo_f40re board
'fixture_i2c_hs300x'
The stm32f401 Nucleo board itself has no sensor mounted
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Rename all Silicon Labs dev kits to always use the official kit name
as board target name. Previous kit names used various naming schemes,
including putting part of the SoC name in the board name. With HWMv2,
SoC names (if needed) should go in the SoC board qualifier.
Use HWMv2 revisions for the two variants of SLTB010A.
Split the xG27 Dev Kit from the EFR32BG22 Thunderboard. This attempt
at deduplication is confusing due to the very different kit names
and use of different ICs (BG22 vs BG27), and was not continued with
the xG24 Dev Kit, meaning that it wasn't consistent.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Added board nucleo_h7a3zi_q overlay file to permit testing the STM32
Digital Temperature Sensor.
Also added the board as integration platform to the sample.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This sample uses the FXOS8700 compatible accelerometer to emulate
relative mouse movement. While this is an interesting example, it does
not provide anything unique in terms of sensor drivers or USB device
support. The example has no documentation and unsafe report buffer
handling. The example would need to be completely rewritten to make it
generic and use any accelerometer, e.g. with an accel0 alias. From a USB
perspective, there is no interest in maintaining this sample or porting
it to the new device support and new HID device API.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add new channel: `SENSOR_CHAN_POS_DXYZ`, so that it is
consistent with other 3-axis channels.
Updated pytest, `sensor_shell` & `fake_sensor` accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Update the pytest script to exercise the entire
`sensor_channel_name` table with `parse_named_int()`.
The `gauge_desired_charging_current` is selected because
it is the last one in the table before `all`, `all` is not
used because `sensor get sensor@0 all` doesn't return anything.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Modified readme for grow_r502a sample w.r.t
latest changes on driver like attributes and
LED controlling via zephyr LED subsystem APIs.
Signed-off-by: Dinesh Kumar K <dinesh@linumiz.com>
Removed fps_enroll, fps_search and fps_delete from
driver code, since they did application usage inside
driver. add the following attributes to achieve the
above functionality from application.
1. SENSOR_ATTR_R502A_CAPTURE
2. SENSOR_ATTR_R502A_TEMPLATE_CREATE
3. SENSOR_ATTR_R502A_RECORD_ADD
4. SENSOR_ATTR_R502A_RECORD_LOAD
5. SENSOR_ATTR_R502A_COMPARE
Signed-off-by: Dinesh Kumar K <dinesh@linumiz.com>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
It seems that harness_config defined in the 'common' section
is discarded when test adds fixture to it's harness_config.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add nRF54L15 to platform_allow and integration_platforms
in the sample.yaml.
Overlay file for that target already exists in the boards
directory.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Lucien Zhao