This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds test for bt_uuid_create APIs using a byte array in LE/BE
format as it is expected and then proceed to compare with matching and
unmatching UUID declared in host byte order.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename bt_conn_security to bt_conn_set_security, this makes the API
naming more consistent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename security level enum, using level and number instead of low,
medium, high and fips.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the coverity problem which which in fact is a non-issue as
the code would assert before reaching that line which makes the NULL
pointer check useless so this removes it.
Fixes#18431
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Disable controller filtering feature not used on mesh stack.
This reduces some RAM usage.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add shell commands to add and remove devices from the shell.
Add commands and options to use whitelist for advertising, scanning,
and creating connections.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This will handle BTP Discover All Primary Services command.
Related TC: GATT/CL/GAD/BV-01-C
Fixes: #17861
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This changes RPA timeout so that the address is changed every 60
seconds. This change is needed to speed up privacy related test cases.
Currently, the new RPA was initiated on request that was a bit hackish
and could be done via BT_RPA_TIMEOUT Kconfig option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This updates tester application to recent changes in BTP related
to Connection Parameters Update.
Connected event has been extended with connection parameters.
Connection Parameters Update command and event have beend added to
initiate and track current connection parameters.
Needed to automate qualification test GAP/CONN/CPUP/BV-06-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables support for GAP writable device name in tester application
for testing purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit moves the BLE GATT heart rate service from
samples/bluetooth/gatt to subsys/bluetooth/services and adds a Kconfig
entry to enable and configure the service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit moves the BLE GATT Battery service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and
adds a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
sizeof(value) returns the size of the pointer, not the pointed string.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
tests/bluetooth/gatt/src/main.c
Tick rate is becoming a platform tunable in the tickless world. Some
apps were setting it due to requirements of drivers or subsystems (or
sometimes for reasons that don't make much sense), but the dependency
goes the other way around now: board/soc/arch level code is
responsible for setting tick rates that work with their devices.
A few tests still use hard-configured tick rates, as they have
baked-in assumptions (like e.g. "a tick will be longer than a
millisecond") that need to be addressed first.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This event is a priority one, so it's not safe to have it use the RX
buffer pool which may be depleted due to non-priority events (e.g.
advertising events). Since the event is consumed synchronously it's
safe to have a single-buffer pool for it. Also introduce a new
bt_buf_get_evt() API for HCI drivers to simplify the driver-side code,
this effectively also deprecates bt_buf_get_cmd_complete() which now
has no in-tree HCI driver users anymore.
Fixes#16864
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This adds initial test for GATT APIs that don't require a connection
thus can be run without any extra setup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds initial test for L2CAP APIs that don't require a connection
thus can be run without any extra setup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It should no longer be needed to set NO_QEMU_SERIAL_BT_SERVER manually
when setting CONFIG_BT_NO_DRIVER.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
With pull request #16208 and #16404 hooks for calling user defined
code was implemented. These user extensions are gated by a number of
Kconfigs. The test in this pull request tests that code compiles when
these Kconfigs are enabled.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
This tries to build gpio without any driver which fails at cmake time
like this:
CMake Error at ../../../cmake/extensions.cmake:378 (add_library):
No SOURCES given to target: drivers__gpio
Call Stack (most recent call first):
../../../cmake/extensions.cmake:355 (zephyr_library_named)
../../../drivers/gpio/CMakeLists.txt:3 (zephyr_library)
Remove TEST_USERSPACE workaround added in commit 3b53e69249 which
added gpio_handlers.c to the SOURCES.
Fixes#15232.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add test for a proprietary HCI Vendor-Specific event.
In the test the controller is replaced with a small stub controller,
with limited support of the initialization flow from the host.
After initialization, a HCI prop event callback is registered and an
prop event is triggered and sent to the host. It is then verified that
the registered callback is called.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Luiz Augusto von Dentz