The HPET reads its frequency at runtime, and thus must set all relevant
global constant values at runtime as well.
Change-Id: I965102bbdcea370297d5a2bbe14177ec0d0d3794
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some timer devices, such as the HPET, read their frequencies at runtime.
All global constant values must be set at runtime in that case.
Change-Id: I408babce6deb857748a87691132d7e27e88f0bb8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This module is based on the standard Local APIC and IO APIC source modules.
This modules combines these modules into one source module that exports the
same APIs defined by the Local APIC and IO APIC header modules. These
routine have been adapted for the Quark D2000 Interrupt Controller which has
a cutdown implementation of the Local APIC & IO APIC register sets.
Change-Id: Ic80aa78918483663d76054ebadefa08d8a3f188a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The PIT is an unsupported device. On x86 based platforms, the LOAPIC_TIMER and
HPET_TIMER are the only supported timers.
Change-Id: Ic890838c811b7eb62008aef0c8a92786f1579217
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Creating the LOAPIC timer Kconfig options permits future commits to remove
those settings from the relevant board.h files.
NOTE: No defconfig files have been modified as the LOAPIC_TIMER configuration
option is not enabled in any of them.
Change-Id: I7d97ed089cd4b734566b698183be95d3a166d71f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds additional Kconfig options to the HPET timer for setting its base address,
IRQ, IRQ priority and condition for triggering an interrupt.
Change-Id: I80349c60237380129da9ef41ccf6850c6b874c3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The name of the device is SYSTICK. The device name should be part of the
file name, like all other timer drivers we support. The name
'cortex_m_timer' said nothing about which device the driver is for, since
it's way too generic: it could be for any timer present on any Cortex-M
board.
Change-Id: I39b4f79c32516ec9aff82c55c0ca639fad1b52bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Qemu implements HPET so that it is connected to IRQ 2, which makes
necessary to use it in legacy emulation mode.
Add legacy emulation mode to HPET driver.
Change the way the HPET driver is initialized. QEMU requires that
the mode (one shot or periodic) gets set prior loading comparator
value.
Add debugging mode to HPET driver to ease the next port.
Change-Id: I668325d5968451585519a08b6c41863cf6e37f88
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Updates the timer driver dependencies to simplify the selection of a timer
driver. The timer driver menu only lists those drivers that are compatible
with the previously selected interrupt controller.
Change-Id: I5deea315f7c373c6660bacc411c6374e7b0ae84d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The LOAPIC_TIMER_FREQ Kconfig option is not used.
Change-Id: I919fd2128f667e0b91467cb542041449738dd992
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the Kconfig option for selecting the Cortex-M systick timer. This helps
pave the way for moving the Cortex-M systick timer into the drivers/ directory.
Change-Id: Iee040083a425c9c1dbc5973991b89239e0a72eee
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit standardize the Kconfig inclusion.
Selective sourcing of Kconfig files create conflict when merging
different configuration files (.config files).
Instead, now each kconfig symbols is dependant of its specific
DRV_* driver ksymbol.
Change-Id: I3d20d108a83f00d34067dc334758fd57e51feecf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the drivers directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I924835ece11a3d597e77a55ace21d724dd5ddbe5
Benjamin Walsh