Move the common #define for IOAPIC interrupt trigger flags out of
platform board.h and into the driver.
Change-Id: Ie7262b69226ebffa7e1b9e35725fda24b3fe089f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The kernel configuration option SHARED_IRQ_1_PRI is dependent upon
SHARED_IRQ_1, not SHARED_IRQ_0.
Change-Id: I018cd8e860c362572cdde8586e50aed990d350bc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the default IRQ priority level from 0 to 2 for the following
kernel configuration options as priorities 0 and 1 are reserved for the
first 32 IDT entries.
SHARED_IRQ_0_PRI
SHARED_IRQ_1_PRI
I2C_DW_0_INT_PRIORITY
GPIO_DW_0_PRI
GPIO_DW_1_PRI
SPI_INTEL_PORT_0_PRI
SPI_INTEL_PORT_1_PRI
Change-Id: I0fc821c68156eb1e1fe776b2bd4ff5890bba40e8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
In order to have drivers that are usable cross architecture the
signature for IRQ_CONFIG needs to be the same to avoid #ifdef hell in
the driver code based on architecture.
Update the macro and it usage for existing drivers
Change-Id: I22e142b21d4e984add231d1dbd97020e4823985f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Gets rid of the trailing initialization level character from the
name of the device variable generated by the macro, since it serves
no useful purpose. (The linker scripts place the various initialization
sections in ascending order based on the name of the section, so there
is no need to embed the initialization level in the variable name itself.)
Change-Id: I56bb79a513b8f77fb1f3fbaccec14454c2520772
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This adds options to the shared IRQ driver so the interrupt
triggering condition can be specified.
For example, the GPIO and I2C controllers are under same
interrupt line through PCI bus. The triggering condition
is level, active-low. So this option can be used by
the Galileo platform to program the IO-APIC correctly.
Change-Id: I1c3af98442e775b4987ab36a644c856052d85ec4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This driver allows multiple drivers to share a common interrupt
line. This functionality is required on system that conform to the PC
interrupt structure. In the context of Zephyr this is needed for
SOC's that have their I/O IP blocks behind a PCI interface. Due to the
limited number of interrupt lines provided by the PCI interface
multiple IP blocks may be configured to share an interrupt line.
Drivers that share interrupts must be modified to *not* register their
own interrupt service routine as part of their configuration/initialization
but instead bind to the correct instance of this driver by name, then
register their interrupt service routine with this driver.
Change-Id: I57b517b97ebeabce484ba53c8f940da993cb391d
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Daniel Leung