This patchset introduces support for building a board specific custom
image for intel_s1000_crb. This pads the output binary (zephyr.bin)
with some additional data as required by the s1000 BootROM.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This patchset introduces support for building board specific custom
images. Any board which needs to build a custom image (a post-processed
zephyr.bin) should inject the post_build_command from a script in the
corresponding board directory.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Don't include net_app.h and net_buf.h, the first is deprecated, the
latter is low-level header, both shouldn't be used for socket apps.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixes the adt7420 sensor sample to fail gracefully if the sensor device
is not found and asserts are not enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The public APIs for application shared memory are now
properly documented and conform to zephyr naming
conventions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Create a reference page for each peripheral and move doxygen API
reference to the main documentation page.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We get the following warning with sdk-ng:
drivers/sensor/lis2dh/lis2dh.c:210:38: error: bitwise comparison
always evaluates to false [-Werror=tautological-compare]
if ((value & LIS2DH_LP_EN_BIT_MASK) == 1 && ...
^~
The test needs to be:
(value & LIS2DH_LP_EN_BIT_MASK) == LIS2DH_LP_EN_BIT_MASK
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
pinmux dev isn't really used or supported. We only have one driver that
is implmeneted, and that driver isn't ever enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Log backends (marked as autostart) are initialized late. By default
in logger thread which has the lowest priority. If log_panic() occurs
earlier no logs is printed because there is no backend enabled.
This patch fixes it by adding log_init() call to log_panic(). Log_init()
can be called multiple times.
This patch ensures that logs are printed if early panic occurs if
backend is configured to auto-start. This is not the case if shell
is acting as log backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The v2018.10 release of OpenAMP reworks the API set and splits the
remoteproc vs rpmsg interfaces so one can use rpmsg without remoteproc.
This helps drastically reduce the code footprint utilized by OpenAMP.
The remote see around 4k reduction in code size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update to new OpenAMP v2018.10 release. This release allows us to
utilize just rpmsg without remoteproc. The API set has changed and
requires updates to the openamp sample. Additionally, the changes
in this release reduce the code size footprint, and support a static
allocation memory model.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The fix in commit e664c78b82 ("kernel/timeout: Fix recursive
spinlock in z_set_timeout_expiry()") missed a spot that had also been
introduced with recent locking work. The new
_get_next_timeout_expiry() implementation takes its own lock, which is
recursive when called from z_clock_announce(). Fix by calling the
wrapped implementation instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was an existing validation layer in the spinlock implementation,
but it was only enabled when both SMP and CONFIG_DEBUG were enabled,
which meant that nothing was using it. Replace it with a more
elaborate framework that ensures that every lock taken is not already
taken by the current CPU and is released on the same CPU by the same
thread.
This catches the much more common goof of locking a spinlock
recursively, which would "work" on uniprocessor setups but have the
side effect of releasing the lock prematurely at the end of the inner
lock. We've done that in two spots already.
Note that this patch causes k_spinlock_t to have non-zero size on
builds with CONFIG_ASSERT, so expect a little data and code size
increase. Worth it IMHO.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If Client send transition time values as 0x40 or 0x80 or 0xC0 then
this was cause the behind divide by zero exception during calculation
of transition->counter. This PR will solve this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
A number of CONFIG_ symbols should have been converted to DT_ defines
instead. Clean that up for PORT2..PORT4.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
nRF91 only does `--sectorerase` (no UICR) and does not need to
enable pin reset (`--pinresetenable`).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When flashing nRF9160_pca10090 board with nrfjprog, explicitly
request for --sectorerase, instead of --sectoranduicrerase (used
when flashing boards with nRF52 SOC).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove conditionals with kconfig options that are not defined and for
drivers that are not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Building of nsim_em board will get the NSIM UART build tested so no need
to have an explicit test for it here.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Minor change:
Rename the file names of the test scripts for consistency with
other BLE code
The simulation identification string is also changed (although
there is no actual functional need)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To also cover the new split controller architecture (with a common ULL
and vendor dependent LLL).
Add a connection testcase (without encryption so far) for the nrf52_bsim
configured with the split controller architecture.
This is just the exact same as the Basic_con test but building the test
with CONFIG_BT_LL_SW_SPLIT=y.
Privacy and data lenght extensions are also so far disabled as the
new controller does not yet support them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To allow for incremental builds also when 2 projects are only
differentiated by the project configuration file.
Separate the build dirertories also by the selected project file.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Previous SAM E70 HAL version was patched by commit 4dcfc8706 ("Add
missing interrupt number definitions") to add missing interrupt
definitions for SAM GMAC Priority Queues. This has been fixed in the
latest HAL by using a slightly different name. This patch updates the
driver accordingly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Following the HAL import, reapply the part of commit 133306152 ("Add
missing header files symbols for Atmel SAM E70") which hasn't been fixed
upstream yet. From this commit, only the DACC alternate pin functions
have been fixed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is an import of Atmel SAM E70 HAL version 2.3.98, and only for the
revision A of the chip. The files have been passed through dos2unix to
minimize the differences with the previous version which seems to also
have been imported that way. All the patches that have been applied on
the previous version have been removed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
off_t is int with the minimal libc and long with the newlib libc. The
log messages are assuming that off_t is int, therefore this causes
warnings when building with newlib.
Fix that by casting the offset to the "longer" type, ie long.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Every now and then the 100ms delay for collecting IMEI data from the
modem, wasn't long enough and this presents a bad user experience.
Let's set it to 500ms which seems to be working all the time.
Signed-off-by: Michael Scott <mike@foundries.io>
During development of the WNC-M14A2A modem driver, I felt like the
initialization took too long to make the user wait. However, due
to the addition of other drivers such as OpenThread where delays
during startup are noticable, the modem startup time isn't so bad.
Let's remove the delay work which allows Zephyr to startup before
the modem is fully initialized.
NOTE: This also fixes a long standing bug where samples using the
modem would never know when it was ready (without waiting for the
interface up event). This change makes it always ready once the
sample starts.
Signed-off-by: Michael Scott <mike@foundries.io>
Don't add non-existing include directories, it creates noise and even
warnings in some tooling, like Eclipse.
This fixes#12696
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Rework extract_{controller,cells} so they aren't recursive. As part of
this change we take the flat cell array property and build a proper list
based on what the number of cells each element would represent.
Fixes#12724
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Because of differents in dtc versions the output of a list property may
vary. We would flatten the list of lists to a single list to match how
older dtc versions did things. Rather than doing that flattening in
multiple places, move it to get_reduced() so we do it just once.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rajavardhan Gundi