When CONFIG_X86_MMU is enabled for arduino 101 the start address
should be aligned to 4kB. If not aligned the page tables would not
be created and the build fails.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Configuring the RAM/ROM regions will be the same for all
x86 targets as this is done with linker symbols.
Peripheral configuration left at the SOC level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
'commit
("devicetree: Generate BLUETOOTH_UART ,UART_PIPE etc config from dt")'
created a dependency of selecting UART_QMSI_0 on device tree.
This change is reverted as it incorrect.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
patch uses chosen property zephyr,bt-uart, zephyr,uart-pipe
and zephyr,bt-mon-uart to determine the uart instance to be
used for bluetooth,uart_pipe and bluetooth_monitor and generate
appropriate configs.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
We can use the chosen property "zephyr,console" to determine what uart
should be used as the console and find its name to generate a define for
CONFIG_UART_CONSOLE_ON_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch allows more generic USB configuration in the samples
and removes platform dependent driver configuration.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
patch adds necessary files and does the modification to the existing
files to add device support for x86 based intel quark microcontroller
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Add a separate section in the linker to place the MMU configuration
information. This location is read by the gen_mmu.py script to
create the actual page tables.
JIRA: ZEP-2095
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. There are few places we dont convert over to the new
types because of compatiability with ext/HALs or for ease of transition
at this point. Fixup a few of the PRI formatters so we build with newlib.
Jira: ZEP-2051
Change-Id: I7d2d3697cad04f20aaa8f6e77228f502cd9c8286
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit da8bff6b20.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: Ibb1fae7500bddb4772b8830d497a0e5f78b44bcc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To allow for various libc implementations (like newlib) in which the way
various {u}int{8,16,32}_t types are defined vary between both libc
implementations and across architectures we need to utilize the PRI
defines.
Change-Id: Ic4e65db52c8d693228cf80584283d4d06e68b5ad
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enable UART_QMSI_0 whenever NBLE is enabled the same way as it is done
for BLUETOOTH_H4.
Change-Id: Ib2f76f7e5e95620d40320891fec1b86509d1856e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix c6e27a05 was too aggressive. It turns out that bluetooth on the
Quark SE boards won't enable it's own UART, because it had always been
enabled. Apps that don't do it already will be broken.
Enable UART_QMSI_0 whenever BLUETOOTH_H4 is pulled in on this
platform.
Change-Id: I5e21c6004714adba8fb0fafa056dc2d62698a3d1
Issue: ZEP-1788
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The defconfigs would always create a device for UART 0, which is
problematic in circumstances where both the x86 and ARC cores are
alive and one wants to use it in a non-default configuration.
Specifically: on Arduino 101 this is the bluetooth device and it
operates at 1MBps instead of of 115200kbps. If an x86 app sets this
up correctly, but then starts the ARC core running an app which
doesn't reference this UART at all, the device will still exist and
set up the (wrong!) configuration, clobbering the correct settings.
Just remove the "def-bool y" bits from the defconfig. There's no
need, users of these devices (e.g. the console) will enable them
anyway. There's no value to compiling it in without a configured
user.
Issue: ZEP-1677
Change-Id: I4a0e944f23705495433e9f3d0459065f131579cb
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In order to set breakpoints after waking up from sleep,
it is needed to save DR0/DR1/DR2/DR3 and DR6/DR7.
As DR4/DR5 are reserved or mapped to DR6/DR7, they are not saved.
Patch2 : Added compile time checks for debug build or soc_watch
build for Intel Energy analysis.
Patch3 : Avoid clobbering of edx.
JIRA: ZEP-1681
Change-Id: I62fbedca16953d57196420ecae4fb93c785bb4a5
Signed-off-by: Sarath R Nair <sarath.nandu.ramachandran.nair@intel.com>
Without this patch, the final linker script had a memory region defined
as:
RAM (wx) : ORIGIN = 0xA8006400, LENGTH = 55*1K - 0x20 +0x4
resulting on the wrong RAM length. Fix BSP_SHARED_RAM_SIZE definition
so the sum is always processed first.
Change-Id: I16b93adbaf27bb84b6e5d1ac433ef80f854b218c
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
A new shared memory has been added to the QMSI bootloader in order to
store the GDT in RAM reliably.
Add this new entry to the QUARK SE C1000 linker script and new kconfig
options:
* CONFIG_BSP_SHARED_GDT_RAM_ADDR to set the address location
of the GDT in RAM.
* CONFIG_BSP_SHARED_GDT_RAM_SIZE to set the size used by the
GDT in RAM.
Additionally, both BSP_SHARED_RAM_ADDR and BSP_SHARED_RAM_SIZE have been
renamed to BSP_SHARED_RESTORE_INFO_RAM_ADDR and
BSP_SHARED_RESTORE_INFO_SIZE respectively, in order to better resemble
what these options are for. All these configs are available
unconditionally.
Change-Id: I07ee8b440d4a3f5e9bdeb62441ff6a7bd6d4c153
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Bartlomiej Majka <bartlomiejx.majka@intel.com>
For the next QMSI release, the shared restore info address has been
modified to 0xA8013FDC .
Change-Id: I72eaef4f15f7ef6fb8e7eb9acd7d96451623e103
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Update the builtin QMSI code to 1.4 (RC2).
The below shim drivers were updated for API or interface changes:
- aio
- counter
- i2c_ss
- rtc
- wdt.
Also, arch soc specific power management code were updated.
Jira: ZEP-1572
Change-Id: Ibc8fae032a39ffb2c2c997f697835bc0208fd308
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This patch changes Quark SE power drivers to support multicore scenarios
e.g. both LMT and ARC core are enabled and manage power.
Handling LPS states in multicore scenarios are dead simple because LPS
states are core-specific states. It means that putting the LMT core in
LPS doesn't affect the ARC core, and vice-versa. DEEP_SLEEP state, on
the other hand, affects both cores since it turns power off from the SoC
and both cores are shutdown. It means that if LMT puts the system in
DEEP_SLEEP, ARC core is shutdown even if it is busy handling some task.
In order to support the multicore scenario, this patch introduces the
SYS_POWER_STATE_DEEP_SLEEP_2 state to both ARC and x86 power drivers.
On ARC, this state works as following:
1) Save ARC execution context;
2) Raise a flag to inform the x86 core that ARC is ready to enter in
DEEP_SLEEP;
3) Enter in the lowest core-specific power state, which in this case is
LPSS.
On x86, DEEP_SLEEP_2 is very similar to DEEP_SLEEP. The difference relies
in the post_ops() which calls _arc_init() in order to start ARC core so
it can restore its context.
This patch also adds the test/power/multicore/ directory which provides
sample application to x86 and ARC cores in order to easily verify the
multicore support. In test/power/multicore/README.rst you can find more
details regarding the applications.
Jira: ZEP-1103
Change-Id: Ie28ba6d193ea0e58fca69d38f8d3c38ca259a9ef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This avoids asm files from having to explicitly define the _ASMLANGUAGE
symbol themselves.
Change-Id: I71f5a169f75d7443a58a0365a41c55b20dae3029
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
replace include <nanokernel.h> with <kernel.h> everywhere and also fix
any remaining mentions of nanokernel.
Keep the legacy samples/tests as is.
Change-Id: Iac48447bd191e83f21a719c69dc26233216d08dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The cpu context save function was manipulating stack and
returning to C caller. This can corrupt stack if the calling
function has data saved and it pops before entering deep
sleep. Moved sleep functions into assembly to avoid this.
Jira: ZEP-1345
Change-Id: I8a6d279ec14e42424f764d9ce8cbbef32149fe84
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Move away from legacy APIs and use unified kenrel instead.
Change-Id: Icae86beec66df1b041405cbe3455913630fc8ad1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for console output via the USB UART.
Note that console input via the USB UART doesnt work.
Adds a simulated poll method for UART interface exposed by USB.
Jira : ZEP-775
Change-Id: I357827ea52c027eb000baed80225f422df1f3358
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Some arduino 101 boards have old boot loader without context
restore boot flow feature. This handler will allow doing deep sleep
in those boards by jumping to the context restore code. This will
be disabled by default and can be optionally enabled by user.
Jira: ZEP-1258
Change-Id: I92e70550fd92c1cac42b3039d667fb0be8cf5bce
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Some bootloaders have power management support to restoer context
upon resume from deep sleep. In such cases, the OS startup code
should call the notification hook. Create Kconfig flags to configure
this option.
Jira: 1257
Change-Id: I9f40c5fa077c2f17dc8e9f11604c3ed17e549ed5
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
When waking up from C2LP state, the timer needs
to be reinitialized as we cannot know the time
that we spent in that state.
In order to reschedule the user application, expire it
as soon as we restart.
Change-Id: Id38a0de71e148ae8d9024a36d3983ab57b1e40d2
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The bitwise AND operator was being applied to the boolean expression
"!shared_data->flags" instead of the whole expression because a
parenthesis was lacking.
This bug has been found using Coccinelle using the following spatch,
after finding a similar bug somewhere else in the code base:
@@
expression E1;
expression E2;
@@
- !E1 & E2
+ !(E1 & E2)
No other instance of this defect has been found with this spatch.
Change-Id: I6b9ca092f4015c80ddc83c31ce540a92e67cdb11
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
A new shared memory has been added to the qmsi bootloader
in order to handle the restore flow and jump to
the restore trap where context is restored.
Add the new entry to the QUARK SE C1000 linker file
and new kconfig options:
- CONFIG_BSP_SHARED_RAM_ADDR to set the address of the
shared memory.
- CONFIG_BSP_SHARED_RAM_SIZE to set the size of the
shared memory.
This is only enabled with CONFIG_SYS_POWER_DEEP_SLEEP.
Jira: ZEP-1046
Change-Id: I35d924a100c5583025aa36a9741428ab51809c57
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
IRQ numbers differ between x86 and ARC, as well as the bits that need to
be touched in the interrupt routing masks. QMSI abstracts some of it and
for the rest we do have the information needed.
Add a macro to select the right IRQ number based on which core we are
building for.
Change-Id: I3e6680d10a0a23c98777d2831efe6819fcb54162
Signed-off-by: Iván Briano <ivan.briano@intel.com>
There are a number of data sections that are repeated across
all the linker scripts for various architecture. In practice these
don't always get updated and we have had problems with bit-rot.
Consolidate these to make maintenance easier.
x86 linker scripts now follow the same naming convention and we
get rid of a linker-epilog.h that wasn't necessary and whose purpose
has been lost to the mists of time. If applications want to define their
own sections they should be allowed to. Linker scripts for x86 do not
end with .h any more, they are not C header files even though we use
C's preprocessor.
Issue: ZEP-688
Change-Id: I893eb4619969695c1f980efd7c2ec9fa5dad136d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adithya Baglody