Atmel Software Framework (ASF) provides a set of low-level header
files that give access to different hardware peripherals of Atmel's
ICs.
Origin: Atmel SAMD21 Series Device Support (1.2.276)
License: Apache-2.0
URL: http://packs.download.atmel.com/Atmel.SAMD21_DFP.1.2.276.atpack
Purpose: Introduction of ASF for the SAM0 series.
Maintained-by: External
Signed-off-by: Michael Hope <mlhx@google.com>
mbedTLS include directories will now default to be in the 'app'
include path when mbedTLS has been enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The CoAP samples use an MBEDTLS config "config-coap.h" which could be
re-used by the LwM2M sample, except that most servers use a larger
maximum content length setting of 1500 bytes.
Let's add a CONFIG to set this for users of the CoAP lib and set the
CONFIG value for the samples to the 256 size currently used.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add the basic infrastructure like driver <-> IRQ mapping table
and ZEPHYR_RTOS compile time flag which are neccessary to make
use the HAL drivers from Zephyr shim drivers.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add the Altera HAL sources from Altera Quartus Lite SDK
to Zephyr OS under 'ext/hal/altera' folder.
Origin: Altera Quartus Prime Lite SDK
URL: http://dl.altera.com/?edition=lite
Version: v17.0
Purpose: Provides HAL support to Altera's soft IP's
Maintained-by: External
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adds a new gpio driver for the NXP i.MX family of SoCs. Read, write,
configure, and callback API functions are all implemented.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds mcux 2.3.0 drivers and device header files for the mimxrt1051 and
mimxrt1052. Updates several drivers that were already imported for other
SoCs but also apply to the mimxrt1051 and mimxrt1052.
Origin: NXP MCUXpresso SDK 2.3.0
URL: mcux.nxp.com
Maintained-by: External
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
After the cmake conversion, the SimpleLink WiFi host
driver would not build, and compiler flags like -Wno-strict-aliasing
were not being applied as they got spliced in before
-Wall rather than after.
This fixes those issues, using the set_source_files_properties()
method as suggeted in the CMakeLists.txt TODO comment.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Version 0.2.8 of this library has been released on Aug 29, and this
patch updates the library from version 0.2.7. A summary of changes
is available at the official repository at:
https://github.com/01org/tinycrypt/releases/tag/v0.2.8
A number of the changes we already had in tree, so the import to sync
with v0.2.8 is pretty minor.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Mysterious TLS errors are printed if we try to work with too
small crypto buffer when https is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for nrf52 series SOC. This patch Adds :-
1. Architecture specific Power Management APIs.
2. APIs for invoking various Power Management tasks into nrf52.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Set default MBEDTLS_HEAP_SIZE to 512 which fixes the driver Kconfig
dependency issues.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The commit delivers HAL/LL static library source files for STM32F0 SoC.
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefits
of a mature SDK.
Origin: STM32Cube
URL: http://www.st.com/en/embedded-software/stm32cubef0.html
Purpose: Introduction of STM32F0xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. HAL is split into 2 parts:
-driver: initially Drivers/STM32F0xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F0xx, contains stm32f0xx
SoCs header files.
Fixes#3923
Signed-off-by: Maciej Debski <maciej.debski@rndity.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Adds a new clock control driver for Kinetis SoCs that have the system
integration (SIM) module. This will allow mcux shim drivers, such as
uart and i2c, to abstract the call to CLOCK_GetFreq() behind the
clock_control interface and thus be reused for SoCs with different clock
architectures.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch sets the correct LSI_VALUE, according to
STM32F3 reference manual's (RM0316) section 9.2.5 and
STM32F1 reference manual's (RM0008) section 7.2.5.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This patch adds Kconfig/build support to MSP432P4XX
SDK. MSP432P4XX microcontrollers have driverlib flashed
onto the ROM, which will be used by default.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are some minor conflicts or porting changes needed to get the
msp432p4xx SDK to work with Zephyr:
1. Remove definition of BIT, as it conflicts with Zephyr defined one
2. Set __SYSTEM_CLOCK define based on Zephyr Kconfig define
3. Fix a build warning that gets treated as an error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
MSP432P4XX SDK is a CMSIS based SDK offered by Texas Instruments
for supporting their Simplelink MSP432P4XX microcontrollers. The
version included in Zephyr is V1.50.00.12 which is a stripped
down version containing only HAL and SoC header support.
Origin: SIMPLELINK-MSP432-SDK
License: BSD 3-Clause
URL: http://www.ti.com/tool/simplelink-msp432-sdk
Version: V1.50.00.12
Purpose: Provides HAL support to MSP432P4XX SoC
Maintained-by: External
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This is a USB controller driver for STM32F4xx devices using
the STM32 Cube HAL_PCD framework. This has been tested with
the cdc_acm driver on a 96b_carbon board (STM32F401RE).
This is a refactoring of:
usb: usb_dc_stm: Add support for STM32Cube HAL_PCD USB driver
Signed-off-by: Christer Weinigel <christer@weinigel.se>
[daniel.thompson@linaro.org: Removed STM32F40(157) defconfig changes
together with STM32F4Discovery pinmux and defconfig changes, updated
clock settings and pad configuration to match latest mainline]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[giannis.damigos@gmail.com: Change uint*_t types to u*_t types,
change SYS_LOG_USB_DC_STM_LEVEL to SYS_LOG_USB_DRIVER_LEVEL and
update pinmux to match latest arm branch]
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The Silicon Labs Gecko SDK provides a set of low-level
header files that give access to different hardware
peripherals of Silabs EXX32 SoCs.
This patch adds build infrastructure files like Makefile
and Kconfig to introduce the Gecko SDK into Zephyr.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This includes:
* the Gecko SDK files for the EFM32WG SoCs
* the emlib peripheral driver files
Origin: Silicon Labs Gecko SDK
URL: https://github.com/SiliconLabs/Gecko_SDK
Version: v5.1.2 (SHA: 938464c68e6c3b2237388a692f767bb0767ec010)
Purpose: Add support for Silicon Labs EXX32 SoCs
License: Zlib
Maintained-by: External
To update the Gecko SDK, download the current version from the given URL
and replace the following folders:
* Gecko_SDK/platform/Device/ should replace ext/hal/silabs/gecko/Device/
* Gecko_SDK/platform/emlib/ should replace ext/hal/silabs/gecko/emlib/
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This patch adds files to build the SimpleLink host driver
and its DPL port to Zephyr.
It disables the host driver build by default.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This ports the SimpleLink WiFi host driver via its OS adaptation
layer to Zephyr OS primitives.
This was validated using an out-of-tree SimpleLink shell
application including functions for:
* WLAN connect, disconnect and scan
* Socket: UDP server and client
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This includes:
- peripheral drivers
- driverlib (HAL)
- WiFi host driver and porting layer interface headers
See README in this patch for details.
Origin: Texas Instruments cc32xx SimpleLink SDK
URL: http://www.ti.com/tool/download/SIMPLELINK-CC3220-SDK
Purpose: Provide driver libraries and HAL for TI CC32XX SoC
Maintained-by: External
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Anas Nashif