Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Appears within an 'if UART_MCUMGR'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Console subsystem doesn't depend on older consoles-in-drivers, the
only common thing between them is CONFIG_UART_CONSOLE_ON_DEV_NAME
setting, so make it so (by depending on either UART_CONSOLE or
CONSOLE_SUBSYS.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This simplifies a bit the driver itself as it does not need to create
the net_pkt it wants to send anymore.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove all references in the documentation and Kconfig options
to the legacy shell to avoid confusing users and developers
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The USB_UART_CONSOLE option itself is not enough to enable console on
the USB UART port. Most of the code is actually shared with
UART_CONSOLE, so this symbol has to be selected.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix issue caused by 3fc497ac9a
This change removes `rtt` and `systemview` from header includes
as these are already placed in the path.
Also `SEGGER_SYSVIEW_ConfDefaults.h` header included from
`SEGGER_SYSVIEW_Int.h` is placed higher to make sure `INLINE`
definition is properly visible.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
As RTT is used by more subsystem in Zephyr, initialization is moved
from RTT console and RTT logger backend to common kernel init phase.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
This option allows to explicitly include Segger RTT libraries and
enables use of it for various subsystems. It is disabled by
default as it consumes more RAM.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
Deprecate API prefixed with sys_ring_buf_ and rename it
to ring_buf_item_ since this API is not a typical ring buffer
but ring buffer of data items (metadata + 32bit words).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added a new UART driver for posix arch boards.
The driver can be configured to either attach to a new
pseudo-terminal, or to connect to the invoking shell
stdin-out.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A few function prototypes were missing in the native_posix
board and its drivers.
Let's add them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In order to avoid bytes dropping when RTT output buffer is full,
RTT session detection algorithm is introduced to the RTT console.
If host session is detected console retries after wait state
expecting host to empty the buffer. If host session is not detected
console drops the byte without retrying.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Some serial tools such as 'minicom' send BS when press backspace,
not DEL, so delete char using BS or DEL.
Fixes: #7959
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
include/uart.h says that an interrupt may be an edge or a level.
Re-work the uart_pipe interrupt handler to support both. This makes
uart_pipe work with the USB CDC ACM driver.
Signed-off-by: Michael Hope <mlhx@google.com>
Add console driver that allows console session to be transferred
over a websocket connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shell crashes when enter is pressed. This commit reverts relevant
changes from 14735116d1 that cause
this issue.
Fixes#6322
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
NATIVE_POSIX_STDIN_CONSOLE and NATIVE_POSIX_STDOUT_CONSOLE have more
than one prompts, this will cause warnings when run kconfig checks.
Remove one of two prompts.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Now the native console driver also handles stdin
so we can drive the shell from the command line,
a pipe or a file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Anas Nashif