Add Kconfig items that can be used to query if the current SoC
support the HW peripheral CTRLAP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The Bluetooth HCI driver based on the RPMsg transport now uses the IPC
service module. The compatible Bluetooth sample - HCI RPMsg - has also
been migrated to the new IPC solution.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add configurable init priority for nrf53 synchronized rtc module.
Add build time assert to ensure that initialization is done after
mbox.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add handling of secure-only code with TF-M enabled that can only be done
from secure processing environment.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a module which is responsible for getting offset between RTCs
used for system clock on NET and APP cores. After getting an offset
between NET and APP clocks, it can be used for logging timestamping
on NET core to ensure that timestamping is in sync on both cores.
Synchronization is done using PPI, IPM task and events and RTC
capture feature.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
All options in Kconfig.soc are only for nrf53 series. Added file
wide guard instead of option specific options.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add Kconfig items that can be used to query if the current SoC
support the HW peripherals for some peripherals that are missing.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
A few HAS_HW_NRF_* Kconfig options for peripherals available in nRF5340
are not selected. Fix it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The way we currently handle direction finding extension (DFE) support
on Nordic nRF5 controllers relies on required devicetree properties
related to DFE in the "nordic,nrf-radio" node.
That doesn't make sense on radios without DFE support, though.
Any .dtsi for an SoC without DFE support which has such a node would
require extraneous DFE related properties like dfe-antenna-num.
Instead of making the properties required, mark them optional. We
indicate the presence of DFE support via a new 'dfe-supported' boolean
property which the SoC .dtsi files can set (or not) depending on
support.
This gives us the opportunity to do some cleanup in the Kconfig,
removing CONFIG_HAS_HW_NRF_RADIO_BLE_DF since we know from the
devicetree whether DFE support is available.
Handle that change appropriately in radio_df.c. This gives us an
opportunity to improve readability in the devicetree-related macro
magic in that file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is a follow-up to commit 60d9988401.
Add a third option for the HFXO capacitance that keeps the default
value of the XOSC32MCAPS register untouched. The message in the above
commit incorrectly claimed that external load capacitors for HFXO
(the reset value of the XOSC32MCAPS register) was the configuration
in effect before. In fact, the register value was modified during
the device trimming in the SystemInit() function to use the internal
capacitors, and that is the configuration required for proper RADIO
operation on nRF5340 DK, for instance.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Switch from using internal 6pf to internal 7pf load capacitor for LFXO.
Use a default clock accuracy of 50PPM as this matches lab results.
50PPM should be sufficient for common operating temperatures of
25degC +- 15.
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
Add Kconfig options that allow configuration of optional internal
load capacitors for the high-frequency (HFXO) and low-frequency
(LFXO) crystal oscillators in nRF5340.
Default settings used for the new options are those that have been
in effect so far, i.e. external load capacitors for HFXO and 6 pF
internal capacitance for LFXO.
This commit also adds missing SOC_ENABLE_LFXO option dependency on
!TRUSTED_EXECUTION_NONSECURE.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add Kconfig options to signify that the nRF5340
HW has support for QDEC instances. Select the
options in the nRF5340 Application core definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The network core doesn't have access to the regulators necessary to
support system power management. That has to be done on the
application core.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a Kconfig option (enabled by default) the enables the low-frequency
oscillator (LFXO) functionality on the XL1 and XL2 pins in the nRF53
SoC initialization routine. This cannot be done in the clock control
driver, as it was done so far, because that won't work in a setup where
the application core image does not use the system clock at all.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF5340 (P)DK is equipped with the MX25R64 flash memory. Add a dts
node for that chip in the board definition as well as the missing QSPI
node in the nRF5340 SoC definition.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Select the controller feature support for data length and LE 2M PHY
based on the SoC hardware capabilities instead of relying on SoC
family.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When enabled, instead of erasing entire flash page at once, page will
be erased in defined time slices. Erasing single page stalls CPU
for significant time share (~80ms) and partial erase divides the
operation in to the shorter time periods, resuming CPU operation in
meantime and enabling better scheduling of time sensitive operations.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Update the hal_nordic module revision, to switch to nrfx 2.1.0.
Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Since the nRF5340 DK contains the required DC/DC circuitry,
enable it by default while keeping it configurable. This
reduces power consumption in application core , network
core and high voltage use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Joakim Andersson