A dummy test to verify SPI driver and API build properly.
Change-Id: Icb1ab282b4a0fa02ec949c96becdfdc16f20bc2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce the GPIO QMSI-based implementation. This is basically a
shim layer that implement's Zephyr's GPIO APIs on top of QMSI drivers.
This is an alternative driver that conflicts with the previous
GPIO_DW implementation. In order to enable it you must set:
- CONFIG_GPIO=n
- CONFIG_GPIO_QMSI=y
- CONFIG_GPIO_0=y
- CONFIG_QMSI_DRIVERS=y
- CONFIG_QMSI_INTALL_PATH="PATH_TO_QMSI"
Note that this driver currently only supports one controller instance,
GPIO_0. It is implemented this way due to a limitation from the current
version of QMSI. QMSI versions later than 1.0 doesn't have this
limitation.
Missing:
- support multiple controller instances (gpio_0, gpio_1, etc);
- enable level triggered interrupts in sync with system clock,
through setting INT_CLOCK_SYNC properly.
Change-Id: Ib61b153dae9741806a9a31d7dc1f82b96d000fbe
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
- Sample application now pulls data continuously.
- Adds information on the arduino analog input pins and ADC channels.
- CHANNEL is defined as a macro.
- BUFFER_SIZE is defined as a macro.
- Sets the sample to run on repetitive mode on ARC architectures
(applies to Arduino 101 ADC).
Change-Id: I6201fea3a98b5394c05eb3ac570793629431ac02
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Quark SE SS provides 2 valid GPIO controllers, thus enabling the built
test case for it.
Change-Id: I46c6ceb3d4fe78a87c095e24851d289720524a9c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a sample app to interface with TI INA219 power monitor.
The values used in the app are for use on Adafruit's breakout board
(https://www.adafruit.com/products/904).
This assumes the slave address is 0x40, where A0 and A1 are all
tied to ground.
Change-Id: I4116629171a98be6f2b9aa422dd3eb386b4d59c2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove architecture config files and have just one, they are the same
now.
Change-Id: I6d719d5409569ae8e741fce20e90e16efa701385
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of relying on the Kconfig variables use a common scheme for
naming i2c devices and use it directly in application.
Change-Id: I745af68d7c1767cc8a24f9655fa45fa33f6baf93
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch introduces the 'QMSI RTC device driver' which is simply a shim
driver based on RTC driver provided by QMSI BSP.
Some config options are independent of the driver implementation used,
so use a consistent name for them. In this case RTC Interrupt number and
Priority use the same config options for both the QMSI and DesignWare
drivers.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_RTC=y
CONFIG_RTC_QMSI=y
Change-Id: I48292406e5472e5786f3b9abbeb71016a273bfec
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds the config file for x86 based platforms.
Also, it no longer clears the screen at each counter update,
as the app is writing the same amount of characters anyway.
This gets rid of the screen flickering.
Change-Id: I1db6dd4b7978b764b7538e120354fc5d010df283
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extends the i2c_fujitsu_fram sample app to do multi-bytes.
Change-Id: I20ea0e08c340cf94158ad521c27d5315e522b6de
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the config file to build for x86-based platforms.
Change-Id: I42c32966507ba822726834a200edd079c90cc96b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
We moved away from quark_d2000_ref_board and use crb for this board.
Change-Id: Ida1fb1675134c4eff7ecd9bf2e1cd1338df7635c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sanity test is disabling the ADC controller before doing a read.
Change-Id: I275a94244a13e80c12e6b39267c4a25dd5479002
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
() Adds board arduino_101, arduino_101_sss to sanity check.
This will build the tests against these two new boards
to catch issues.
() Updates existing sample apps to be arduino_101_sss instead of
quark_se_ss, due to renaming of boards.
Change-Id: Ic512728d2ce581539bc3ae4c9f6524d5bf01b296
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sample just prints 'Hello World', Nothing else.
Change-Id: I93af3fdc2de342e878bc038f937e7f1ad2231bd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is more than just a hello world, it demonstrates basic
kernel functionality that deserve to be its own sample.
A simplified Hello World sample will replace this one.
Change-Id: I9120daa1923f99def994e484783abe04db5b14eb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a sample app to utilize the PWM on Arduino 101 via the pwm_dw
driver. Refer to the source file header for more information.
Change-Id: I0ad0f24242185b7b99e66445629d676ffde0bba3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The basic is the same for both architecture, but using different
GPIO controller and pins.
Change-Id: Ie021461858736d90a47bdef2c9d5e655e2efa473
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app to utilize GPIOs on x86 side of
Arduino 101. Refer to the header of source file for
more information.
Change-Id: Ie547618b2c4fb483d85d6458bd68dd2849e1d19d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app which displays an incrementing
counter through the Grove LCD, with changing backlight.
Please refer to the README file on how to setup
the hardware.
Change-Id: I95c0571edaeabb281ee06f3b32fad1ab5b64d924
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app to utilize the Fujitsu
MB85RC256V FRAM via I2C on Arduino 101. It does
simple read and write on the chip.
Change-Id: Ie20470f3701acb0e4fa9bc3d7b3676625839cf06
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: I1c225c1b68d94b22ca10423b50a78a0ba09a27a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: Idcc89e6e9f4acc337fafc7d42f8de3061a5ece04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple RTC, either internally or externally.
Applying the changes to the DesignWare driver relevantly as well as
to the sample code.
Change-Id: Ia70e791a6c45e186cbc4dc900a268fa882331af5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple watchdogs, either internally or
externally. Applying the changes to the DesignWare driver relevantly as
well as into the sample application.
Taking the opportunity to apply propre style when need (80 chars limit
for instance).
Change-Id: Iad020c697846db483a70a748cfc8fe7147ec3c04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change the configuration to enable the sleep events in
the nanokernel event logger sample.
Change-Id: Iea5bde06736b0499c8517de1549dee894a9db094
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
build application for the supported platforms to catch any
breakage.
Change-Id: I31f3ffd3a95966ba72989a646d8ecd27efb55985
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application creates a watchdog with 4.194s timout and reloads
every time it kicks (and does not force a reboot).
Change-Id: Ib128e2f7f91d05081d1bfb8cc24258b69bd3cb6e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample creates an alarm and repeats the alarm on every
interrupt.
Change-Id: I97583e3c5af826c51536f8d244c016e2c628e88a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sample suffix is redundant, since we are under samples.
Change-Id: Ifb59007f0c1b156c7bb306506e3b22efc9b993dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the following cruft from the nanokernel version of the kernel
event logger sample application:
1. MDEF file
This file is only relevant to microkernel projects.
2. References to advanced power management and tickless idle
These features are only relevant to microkernel projects
Change-Id: Ice9bbf0a3d73c45a9157bd38e0a2703f5915d51d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Tomasz Bursztyka