This commit adds support for a 6LoCAN Ethernet border translator.
CAN frames with the translator CAN address are translated and forwarded
to Ethernet. Ethernet frames with the first 34 bits matching the MAC
address of the translator are translated and forwarded to 6LoCAN.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
ETH_LITEETH is defined in drivers/ethernet/Kconfig.liteeth, which is
source'd within a menu that has 'depends on ETH_LITEETH', in
drivers/ethernet/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Liteeth exposes two memory regions:
* set of rx/tx buffers (aka slots) to exchange packets,
* control and status registers.
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
For STM32F7 MCU the actual implementation doesn't work when the
DMA buffers are placed in the SRAM.
This might be a problem with caches.
To overcome this problem, the buffer is moved to the DTCM.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree and its setting
for random/unique addresses.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move i2c.h to drivers/i2c.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is mainly testing purpose from native_posize ethernet
driver. Enable CONFIG_ETH_NATIVE_POSIX_VLAN_TAG_STRIP to have
VLAN tag strip feature on ethernet Rx frames.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Migrate from "legacy" PCI support (drivers/pci) to new PCI(e) support.
The e1000 driver is merely for testing with QEMU and so should not be
a model for the use of PCI(e) functions. Consult instead "real-world"
PCI(e) drivers like the NS16550 UART (drivers/serial/uart_ns16550.c).
Signed-off-by: Charles Youse <charles.youse@intel.com>
As part of the ll_reserve refactoring effort, the packet length now
includes header size as well. Before the refactor, when the packet
length was written to the device, it did not include the header size,
which is the required value as per the LM3S6965 datasheet. After the
refactor the packet length includes the header size as well. The
header size has to subtracted from the packet length before writing to
the device. Fixes#13943.
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
When building with -fno-inline, the compiler complains about
undefined reference to this function. This happens when
building for code coverage. Since this function is only called
within the file, mark it static also.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In the conversion of net_pkt_read_new to net_pkt_read, we missed
changing the function in the eth_smsc911x and eswifi_offload.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some places were still using the old allocator. Using the new one does
not change any behavior. This will help to remove the useless data_len
attribute in net_pkt which legacy allocator was still setting.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove magic numbers from Ethernet drivers and tests by defining
NET_ETH_MAX_DATAGRAM_SIZE and NET_ETH_MAX_FRAME_SIZE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Removing the TX timeout handling in the GMAC driver (commit 18b07e09e0)
revealed some issues with the way hardware priority queues work.
For cases with both hardware priority queues enabled, with the default
recommended delta bandwidths (0% - 75%), the lower priority queue (0%)
is hardly able to send any packets. This became visible, because without
the timeout mechanism, we quickly ran out of available TX buffers if
there were multiple packets being queued to the queue.
Here is an excerpt from 802.1Q, chapter 34.3.1 which describes how Qav
bandwidth sharing SHOULD work:
The deltaBandwidth(N) for a given N, plus the deltaBandwidth(N) values
for any higher priority queues (larger values of N) defines the total
percentage of the Port’s bandwidth that can be reserved for that queue
and all higher priority queues. For the highest priority queue, this
means that the maximum value of operIdleSlope(N) is deltaBandwidth(N)%
of portTransmitRate. However, if operIdleSlope(N) is actually less
than this maximum value, any lower priority queue that supports the
credit-based shaper algorithm can make use of the reservable bandwidth
that is unused by the higher priority queue. So, for queue N-1, the
maximum value of (operIdleSlope(N) + operIdleSlope(N-1)) is
(deltaBandwidth(N) + deltaBandwidth(N1))% of portTransmitRate.
However in reality, the lower priority queues (N-1) on the SAM GMAC
hardware DO NOT use the bandwidth available from the higher priority
queues (N).
This commits fixes the issue by changing the defaults. These are still
set to the recommended 75% (total), but this percentage is split between
the priority queues manually.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is a log message printed for the non-priority queue (Queue 0). Add
the same message for the priority queues too when they are enabled, and
a corresponding message when the queue is not used (set to idle).
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Throughout the manual, the queues GMAC is equipped with are identified
by a number - Queue 0, Queue 1 and Queue 2.
However in the context of Qav, the queues are identified with a
character (note that there are only two queues as Qav is not used for
the non-priority queue) - Queue A and Queue B.
Queue B and Queue 2 are also called "the highest priority queues".
Based on that, the previous implementation was using the following
mapping:
Queue 1 - Queue A
Queue 2 - Queue B
However when running some specific tests, that is for example forcing
all the traffic to Queue 1, it showed that this queue is actually
affected by the Queue B registers. Similarly, Queue 2 seems to be
affected by the Queue A registers.
Based on that observation, this commit changes the registers used to
work with the following mapping:
Queue 1 - Queue B
Queue 2 - Queue A
Note that this is based solely on observations, there is nothing in the
datasheet that confirms this, and the "highest priority" label suggests
it is otherwise.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This option is meant to be used only for debugging. Use it to force all
traffic to be routed through a specific hardware queue. With this option
enabled it is easier to verify whether the chosen hardware queue
actually works.
This works only if there are four or fewer RX traffic classes enabled as
the SAM GMAC hardware supports screening up to four traffic classes.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The interface name is IFNAMSIZ long so we must not copy it
full which would overwrite the terminating null byte.
Coverity-CID: 195770
Fixes#14419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of these are from 'source'ing a file within a menu that has a
'depends on NET_L2_ETHERNET' (in drivers/ethernet/Kconfig) and then
adding another 'depends on NET_L2_ETHERNET' within it.
Similarly, subsys/net/l2/ethernet/Kconfig sources files within an
'if NET_L2_ETHERNET'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix calculation of frame length in eth_enc28j60_rx().
The calculation was incorrect because the CRC size was
subtracted only from the lower byte.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The j iterator is used for priorities, and the i iterator is used for
choosing the actual screening register. Therefore the screening register
availability needs to be checked with i.
This commit also improves the readability by doing two things:
* by moving the screening register index check to a place where the
index is going to be actually used
* by using the ARRAY_SIZE macro instead of a hard-coded number as the
upper limit
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The feature that used this symbol was removed in 18b07e09e0.
This is just a cleanup commit that removes the unused symbol.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Same change as in commit 8cf8db3a73 ("Kconfig: Use a short, consistent
style for prompts"), fixing stuff that got introduced since then.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Alexander Wachter