Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
A comment which had been copied straight from the native_posix
board refered to the nrf52_bsim board as native_posix,
which it is not, and may confuse users.
Fix it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Incoming updates to the nRF clock driver require some extra enum
definitions from the nRFx HAL which were not available in HW
model versions before 1.4 => update it.
Also as the nrf52_bsim does not yet support DTS, include a define
for the clock IRQ interrupt number (as the new clock driver will
be using the DTS macro instead of the nRF MDK value.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Remove all references in the documentation and Kconfig options
to the legacy shell to avoid confusing users and developers
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Not all boards can get the coverage reports. The report generation
needs minimum of 64KB SRAM. This patch added support for mps2_an385,
qemu_cortex_m3, qemu_x86. This is just a subset. Also the previously
supported board native_posix is included in this patch.
If a board has 64KB RAM, it can generate reports by just
adding HAS_COVERAGE_SUPPORT in Kconfig.board.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In 4940a3cac2 a compile time
check of the HW model version was added. This check worked
fine for cases in which the problem was that people had not
fetched a new enough version of the HW models.
But in some cases people will have fetched a new enough version
but be (unknowingly) in a past detached HEAD (or old tag).
With this change we ensure that the required tag is an actual
ancestor for the current HW models version HEAD
Also fail with an error, instead of just printing a warning.
Users can still disable this warning if they know what they are
doing.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
With this change, drivers or components can register on runtime
their own command line arguments.
What this change does is to use the dynamic command line arguments
API from BabbleSim's libUtil and provides a function for the
drivers to add their own.
Note that this change requires v1.3 of the HW models (which remove
a dependency on the board command line arguments structure)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This function can only be used when the arguments structure memory
layout starts as in bs_basic_dev_args_t.
This assumption is just too dangerous in this board as somebody
may change the structure in the future unaware of this weird
requirement.
=> Do not use this function but do what it does in place.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When the -nosim option is used the user may still want to set
either the simulation ID string (-s) or the device number (-d)
to control the tracing prefixes and/or dump folder, but may not
care to set both of them.
=> This change allows it, while the old behaviour is otherwise
maintained (setting both or none with -nosim)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This driver introduces an emulated LCD display for the native POSIX
board. The emulated display driver makes use of SDL2 to render the
displays frame buffer into a dedicated desktop window.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
In commit d8e3ea6bc2
the LF clock interrupt was enabled, which causes its interrupt
handler to be used. This interrupt handler interacts with the
NRF_POWER registers.
Therefore require using the newer HW models which include a stub
of this registers.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
If we just had the kernel's implementation, we could
just move this to lib/, but possible arch-specific
implementations dictate that we just make this a
syscall.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This can help find unused symbols. Those end up without a type if
'default' is used instead of 'def_bool', which generates a warning.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
a longer explanation.
Keep the 'def_bool' for the following symbols, which seem to be
deliberately defined only in Kconfig.defconfig files:
- ALTERA_AVALON_I2C
- ALTERA_AVALON_MSGDMA
- ALTERA_AVALON_PIO
- ALTERA_AVALON_QSPI
- ALTERA_AVALON_SYSID
- CLOCK_CONTROL_IMX_CCM
- CPU_EM4_DMIPS
- CPU_EM4_FPUDA
- CPU_EM4_FPUS
- FP_FPU_DA
- I2C_GECKO
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In #10543 some include directives are modified to include some
folders in the path to the nrfx hal headers.
This would break things with the previous nRF52 HW models as the
replacement hal files were not placed in a folder matching that
path, and the include path was not pointing directly at the folder
containing the files.
Therefore, require the latest HW models version (which replicates
that folder structure), and add a new -I for the compiler 2 folders
higher.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added a check at compile time to ensure the HW models are either
the desired version or newer.
Otherwise print a warning.
The check can be disabled by setting the enviroment variable
NO_NRF52_BSIM_VERSION_WARNING.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
native_posix is, from some reports, known to not compile
on macOS. Therefore let's better remove the line that says
that in principle it should to avoid missleading users.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This is only a codestyle fix with no functional implications.
A few structures typedefs are removed. The structures are not in
use yet outside of the board code.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fixed a typo in the warning message printed when the user does not
pass any parameters (and therefore does not connect to a BabbleSim
Phy)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fixed a very unlikely NULL pointer dereference, which could occur
in an error condition, triggered if the test/fake HW timer model
was enabled but there was no registered handler for that timer tick.
The de-reference was in the error message printout.
Fixes#10778
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To ensure we can always go back in time, let's explicitly list the
NRF52 HW models version which should be used with each version of
the nrf52_bsim board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added a new simulated board, which models the NRF52832 SOC.
Its main use is for workstation testing and simulation of
the BLE stack and any application which relies mostly on it.
It uses BabbleSim (http://Babblesim.github.io) for the radio
simulation.
And the NRF52 HW models hosted in that same GitHub organization:
https://github.com/BabbleSim/ext_NRF52_hw_models
For speed it uses the POSIX arch to (not) emulate the CPU.
It uses Vanilla Zephyr, with a couple of configuration differences:
* It uses (like other POSIX arch boards) the system libC
* It does not use the nrfx hosted by Zehpyr in ext/, but the one
provided by the HW models.
Otherwise it relies in the same drivers as the real NRF52 boards.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Remove the links to the now non-existant legacy shell documentation
and clarify a bit paragraphs (as the legacy shell is not default
anymore)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The peripherals sections grew by adding new peripherals
at the end. Reorder them so they follow a more reasonable
order.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Now, there is quite many more command line options for the
native_posix executable. But, which are available, depends
on the configuration. Therefore let's not list them in the doc,
but instead tell people to use the --help option.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added a new UART driver for posix arch boards.
The driver can be configured to either attach to a new
pseudo-terminal, or to connect to the invoking shell
stdin-out.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Enable native logger backend for native_posix board in defconfig.
Set also logger configuration options suitable for native_posix
backend.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For native_posix:
Added command line options to control if traces should have
or not colors.
+
Detect if we are connected to a tty or not, and if we are
set the defaults for that option appropriately
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix in command line parsing common functions, to prevent
a possible segfault when handling string type arguments
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
A few function prototypes were missing in the native_posix
board and its drivers.
Let's add them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
For each driver/model with command line options.
Move its code for the board file into the driver/model file.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Allow command line arguments to be registered dynamically
instead of being statically defined.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some drivers or tests need to execute some code before Zephyr is
booted, dynamically register command line arguments, etc.
For this purpose, we generalize the NATIVE_EXIT_TASK to also
provide hooks to run a function at a given point during the startup
of native_posix.
Also, test/boards/native_posix/exit_tasks is generalized to cover
this new functionality.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
For native_posix:
Added the option to control the speed of the simualated time vs
the real(host) time.
Added a model of a real time clock with an API.
In the documentation we clarify the relationship between simulated
time and real time, and include documentaion of this new RTC.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Until now, command line options switches which matched the
begining of other options with argumentes needed to be listed
after those. After this fix this is not neccessary anymore.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Let the HW events which would have executed right at the
stop-at time happen, as this produces a more intuitive runtime.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Some of the native application components or drivers need to
do a proper cleanup before the executable exits.
So we provide a macro similar to SYS_INIT but which will be
called just before exiting.
This can be used for freeing up resources, closing descriptors,
or doing any neccessary signaling to any other host process.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Override the C standard used for compilation to C 2011
This is due to some tests using _Static_assert which is a 2011
feature, but otherwise relying on compilers supporting it also
when set to C99.
This was in general ok, but with some host compilers and C
library versions it led to problems. So we override it to 2011
for native_posix board.
Fixes: #8529
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Krzysztof Chruscinski