Adds documentation file of oliemxino_stm32 to the
supported boards.
Change-Id: Ide6c7767be56d33e8c040a03df13337919a09750
Origin: Original
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Adding documentation for building, flashing, and debugging the Quark
D2000 series CRB.
Change-Id: I3d61d5c8b88b5f74da76262d4fcda823c6f7b9b3
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We have not found any use-cases for dynamic IRQs where a static
IRQ did not also suffice. Deprecate so that we can eventually
remove from Zephyr and nontrivially decrease the complexity of
the kernel.
Change-Id: I509655371773aeaca7d01134dd850eb4cd95f387
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There were inconsistencies and outdated information in the Intel
Galileo board instructions. They were also unnecessarily complex.
Corrected inconsistent instructions for copying the stripped ELF file
to the boot device.
Updated description of what output to expect from Galileo firmware
during boot.
Added links to board configuration instructions from Intel website.
Added instructions for configuring PuTTY keyboard mode.
Removed redundant instructions in the sections for boot device
preparation and booting the board.
Simplified the UEFI boot instructions.
Change-Id: Ie1a636a7f88a89f23945eb742536446c6a5829c1
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
I built GRUB on Ubuntu v.15.10, and I found that some of the
dependencies listed in the Galileo documentation do not actually need
to be listed on the apt-get install command line. Some are simply
unnecessary, and others are already listed as dependencies by other
packages in the list.
Change-Id: If6ae0c3abe54a18839e75299a3e9cf006c745d0c
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
The Arduino Due requires a specific version of the bossa tool
to facilite the flashing process. The working one is on a branch
in the bossa github project. So make it clear that we need that
particular branch of bossa to work.
Change-Id: Ic7290dd4d7812f1cad4d87ad282dc90ea9b29c01
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Currently we have several sections that require the use of sudo for
functionality, but that is a workaround to the need for libusb to
control the FlySwatter hardware. This can be solved by adding in
proper udev rules.
Change-Id: I03f6464cb96a9924c902b897c36df925eb07d058
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The current documentation seems to gloss over the fact that powering on
the device before any JTAG operation is necessary.
Change-Id: Id7a46b611ddba97fa72e0a3a33ddc189b1e4a7c4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Pins start at 1, not 0. Including JTAG pins.
Change-Id: I2e058c114bd1a4da25d4964e418a942d3c41b08c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The build steps as they are written imply that you will always need to
source the zephyr-env.sh file before flashing. This is not the case.
Change-Id: I2cffd5ee4b190dee8304f1843727926c7467f5ed
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Correcting the steps for running the loading of the ROM image.
Change-Id: Icdcfe1c5ffb28ba09b5d12ba0cf39ac25d3d166f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Remove table which had redundant information and created a simple TOC
with boards. This will allow easy expansion of the list over time.
Change-Id: Ic94063cc99ddcb3d2140a4beef1067a9766d60a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
... and adds a note about terminal and flashing.
Change-Id: I9b3fe9a8e9993ee68612d177aa4163fcf15e912d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Supported platforms section (platforms.rst) renamed to "boards.rst"
and broke into two tables instead of one (x86 arch and ARM arch).
Developer feedback was that navigating for board config options
by board architectures should be made easier.
Also updated index w/TOC to make supported board details
easier to find.
Change-Id: Ic014a720fd33ee685bde5809dc5b9e0622f5e989
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Fixing the flash script so that we only have one for the process of writing
out the ROM and the OS images.
Change-Id: I6fc8bd8eee553a17c0036da3ce5b89510f3b57d8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adding in an image for locating the JTAG connector on the Arduino 101 board,
and a visual pointer towards the JTAG silkscreen dot.
Added figures for the JTAG connector.
Change-Id: I57ed5608bf2f3ded325965ec77142e3376f386ed
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adding in a section for attaching a serial cable, and links for two that we
have found that work for us. Adding in links to both serial cables.
Added figures of the pins with appropriate callouts.
Change-Id: Ibae64811f1c32f6a8e82be17abbc91df6c53219a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Fixing a few notes that are not being properly displayed.
Change-Id: I60f8a8615ee93ba391a99a819aa1761e6713e51b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Edits based upon the first version of feedback from the User Trial
sessions.
Change-Id: Ie339eaebab4a43a822e419cf988d9b9893faa922
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Yannis Damigos