This patch fixes an unreachable code condition in the uart_console
driver.
If UART_CONSOLE_DEBUG_SERVER_HOOKS was not defined
handled_by_debug_server in console_out was always 0.
This issue was reported by Coverity (CID 131627).
Change-Id: I4376c3e5b3e68220218df6aabd91b6a8900ca31f
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Move away from legacy APIs and use unified kenrel instead.
Change-Id: Icae86beec66df1b041405cbe3455913630fc8ad1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix compilation error when CONFIG_USB_UART_CONSOLE is not enabled:
drivers/console/uart_console.c: In function 'uart_console_init':
drivers/console/uart_console.c:497:12: error: unused variable 'dtr' [-Werror=unused-variable]
uint32_t dtr = 0;
Change-Id: I592724150f86199f6a57354c3246197db2ac7a01
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for console output via the USB UART.
Note that console input via the USB UART doesnt work.
Adds a simulated poll method for UART interface exposed by USB.
Jira : ZEP-775
Change-Id: I357827ea52c027eb000baed80225f422df1f3358
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This fixes the warnings related to the use of deprecated APIs
converting them to use the unified version.
Change-Id: I76d076de27ecdae4af46abf4baac68e2cc1313c0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The shell is not a kernel feature, it is more of a subsystem.
Change-Id: Iaba60b2086ddfe77af427d70b8fc8d06a8bebe14
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add kernel functions to kernel module and make it part
of the shell sample.
Change-Id: If5e8ff8ce7b8edbbb8d62509964700b007eaf88b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There is no need for copying command string to temporary variable on
the stack.
Change-Id: I41fd2582600908ac523b87c83a426eef27d1c454
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fix commands tab completion and make it similar to Linux shell
completion:
- single match complets command and add space at the end
- multi match lists matched commands and complete common part
- no match does nothing
Change-Id: Ib2d90889c79e8d35a78b8847d2b9e124cdc00a6c
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
If application prompt handler returns NULL curently selected module
prompt should also be checked before of printing default shell prompt.
Change-Id: Iba9c191041951c31036766b1cc8070b040655445
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to delete character after cursor.
Change-Id: I9acc5e1edeb688ea4ec36e91aef69ecb5f5f6354
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to navigate to begining and end of the line easily.
Change-Id: I3a839a0499961d55574a310c65811dd2fe048703
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This refactor is in preparation for making driver API structures
const.
The console driver provides a mechanism to install an input and an
output hook function. These are primarily used by the onboard
gdb-server. The output hook is entirely implemented within the
console driver.
The input hook is partially implemented in the top of the uart driver
and within the console driver. The hook function itself is installed
in the uart API structure, but is invoked only by the console driver.
Installing the hook function directly into the uart API structure
prevents the API structure being const. There are two approaches to
fixing this:
1) Implement setting of the input hook in the same way as
uart_irq_callback_set().
2) Move the input hook entirely to the console driver.
We implement the latter. This approach has two benefits, first it
removes the need for every uart driver to implement the behaviour and
second, the current placement of the callback function in the uart API
seems odd given that the callback is only invoked by the console
driver, never by a uart driver.
Change-Id: I258b312d3055df1c2bdeb896bd4f4f39c40838f7
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Overwhelming industry practice when using two-byte line termination is
to end the line with "\r\n" and not "\n\r".
Also remove needless casts. GCC does not warn on int-to-char
conversions.
Change-Id: If01a2e5ca327aacebcbcaf384af9c7131119689b
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These console messages are for debugging and if sent too
rapidly, could be discarded. This was causing false positives on
test cases which rely on console output to determine success or
failure.
Issue: ZEP-704
Change-Id: I5a86c761311cde90f295cd2e65f2e70608f875fa
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The (currently) unused ipm_device field wasn't initialized.
Issue: ZEP-704
Change-Id: Icbeb50031c52d2513a1417f83a844e25b43429a7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Print commands names when matched instead of first creating
completion string in buffer. Common part of commands names
can only be reduced when matching further commands so only
first match needs to be kept for altering command line.
Change-Id: I5a9d2eb171ef4d31da9cbe6e93b577457b13c5a2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds simple tab completion for shell use convenience.
Change-Id: If90ded32fb5044741232933d2cb0ce626227d025
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to register callback that will be called to
perform command completion.
Change-Id: Ide7a0427d9b8bb4dd8cfc0995ef2567b32e89632
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This checks if the command string is either NULL or empty since in these
cases there shouldn't be necessary to do any lookup.
Change-Id: I27e6d5b07ab4000cce93a4d1f7952e3c57672657
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Contrary to strcmp strncmp does not match the entire string only the
initial bytes passed as len thus causing a prefix match not a exact
match logic.
Change-Id: I85f96beb2249223f44c81c4efd6bd01bf2033a2e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a optional help string to the command table which is printed
when user enters > help <command>.
Change-Id: Id3a8995bb6c4ff6b009418e31968c0677e6e4921
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A debug server might want to redirect outgoing characters on the console
to another output if it piggybacks on the serial line normally reserved
for the console.
Change-Id: I534f5b35456306940a3926f52fe5cce2d5c94da4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The commands array is not expected to change and can be declared
const. This allows callers to cleanly declare their commands lists as
const, effectively moving the structures from SRAM to code section.
Change-Id: Ie1710622b8cfa609e129eb79712f910f1d1aace3
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This patch fixes drain of data left in UART Rx fifo.
uart_irq_tx_ready checks if Rx IRQ has been raised,
but because Rx IRQ is disabled this won't work even
if there are some data left in the UART buffers.
So simply uart_fifo_read is used to discard the data that
left in UART buffer.
Change-Id: I17f145ba58640650bafd3602412fc75229f39664
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Most of the SoC and board Kconfig use the same values for
driver initialization priorities. So refactor them, and
discard duplicate ones.
The shared IRQ init priority was changed so that the kernel
default init and device init priorities can be standardized
across all SoC/boards. Same goes for DesignWare SPI driver.
This also changes the UART_CONSOLE_PRIORITY and
IPM_CONSOLE_PRIORITY to UART_CONSOLE_INIT_PRIORITY and
IPM_CONSOLE_INIT_PRIORITY, to standardize across all drivers.
Note that this does not take away the ability to override
those values. This just provides reasonable defaults such
that there is virtually no need to override.
Change-Id: Ibbd95d802c637df06f9a2fd48763ee1e6f4ff627
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_CONF by
-EINVAL at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: Idae0d5af8dd780416977c9261a5fb6188c3aab64
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The peripherals utilizing UART were required to register their own
ISR rountines. This means that all those peripherals drivers need
to know which IRQ line is attached to a UART controller, and all
the other config values required to register a ISR. This causes
scalibility issue as every board and peripherals have to define
those values.
Another reason for this patch is to support virtual serial ports.
Virtual serial ports do not have physical interrupt lines to
attach, and thus would not work.
This patch adds a simple callback mechanism, which calls a function
when UART interrupts are triggered. The low level plumbing still needs
to be done by the peripheral drivers, as these drivers may need to
access low level capability of UART to function correctly. This simply
moves the interrupt setup into the UART drivers themselves. By doing
this, the peripheral drivers do not need to know all the config values
to properly setup the interrupts and attaching the ISR. One drawback
is that this adds to the interrupt latency.
Note that this patch breaks backward compatibility in terms of
setting up interrupt for UART controller. How to use UART is still
the same.
This also addresses the following issues:
() UART driver for Atmel SAM3 currently does not support interrupts.
So remove the code from vector table. This will be updated when
there is interrupt support for the driver.
() Corrected some config options for Stellaris UART driver.
This was tested with samples/shell on Arduino 101, and on QEMU
(Cortex-M3 and x86).
Origin: original code
Change-Id: Ib4593d8ccd711f4e97d388c7293205d213be1aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some terminals (e.g. screen) don't seem to propagate carriage returns
through, creating the following kind of results when pressing enter in
a shell:
btshell>
btshell>
btshell>
btshell>
Fix this by always printing out '\r' when receiving a carriage return.
Change-Id: Ia5ce5612c9b830edc84619538dc17a654b6e805b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For non-interrupt transfers poll_out should be used, This fixes data
lost issues on a real UART hardware like Arduino 101 and Galileo
boards.
Change-Id: Ic7a5d055941d83f9d62cbea9e911ce25730ed7b6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mostly SoC initialization and some kernel subsystems, but also some
device drivers like the interrupt controllers.
Change-Id: I8dc1844c33acd877c075b6b03558fdca6f87500b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API is not being used for anything, the interrupts for UART
drivers are all being configured statically. Saves code space as
gc-sections can't tell that these APIs are unused.
Some instances where IRQ/priority information was being saved in
data structures and never used fixed.
Change-Id: If56b4fdc251b80be9094ffcbac6f61e265ac2ffd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Baohong Liu