Point to a new wiki page for the documentation. The old page can be removed
once this patch is committed.
Change-Id: I2b031bfffe10ec24c41c58d0754f2b14d95f5e53
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Contains an nRF52832 as the main SoC and a LPC11U35 that provides onboard
debugging capabilities and a USB-ISP interface.
Change-Id: Ie6457cc5586bda9bbc0c073f96d23cc2205332c5
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Board documentation was moved to wiki.zephyrproject.org and documents with
links to the corresponding wiki article left in their place. This fix
cleans up the figures (.png files) that were left behind and are no longer
needed here.
Change-Id: I9056046fd7c9307de750360e20d8f970ee7ae3b9
Jira: ZEP-564
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Moved the DesignWare ARC EM Starter Kit information from
em_starterkit.rst to the Zephyr wiki.
Change-Id: I2d5343d7bf03c69f5c8365e955dbb86980b4c5d1
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved board content from arduino_due.rst to the Arduino
Due Zephyr wiki article.
Change-Id: I438d674b43836beb45a0690d86327b9526c9eddf
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the QEMU x86 information from qemu_x86.rst
to the Zephyr wiki. Also corrected a typo in
qemu_cortex_m3.rst.
Change-Id: Ic7ac8a1ab59018f25466c9031ce465973d6bdd8f
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the QEMU_Cortex_M3 information from qemu_cortex_m3.rst
to the Zephyr wiki.
Change-Id: I4899c562844f8fc90096aea45b14a80f40791239
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the OLIMEXINO-STM32 information from the
olimexino_stm32.rst file to the Zephyr wiki.
Change-Id: I97aa1b400bd65bbe53bb58e635a789cb325c3795
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the nRF52-PCA10040 information from nrf52_pca10040.rst
to the Zephyr wiki.
Change-Id: I0069b9e720a39b515c8ca612343e3f3410f4a77a
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the Minnnowboard Max information from minnowboard.rst
to the Zephyr wiki.
Change-Id: I97c2090e3a76e2ab6a9ab1e5f338fb4c3ffb0715
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the Galileo Gen1 and Gen1 info from galileo.rst
to the Zephyr wiki.
Change-Id: I2210ab98429efb55be5ef3e47096842dfdbce16e
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Signed-off-by: viggo.jf.intel.com <evanx.couzens@intel.com>
Moved the FRDM-K64F information from frdm_k64f.rst
to the Zephyr wiki.
Change-Id: Ibf5431d21bb82af1b9eebc7b693b88d774247369
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the arduino_101_ble.rst content to Zephyr wiki:
https://wiki.zephyrproject.org/view/Arduino_101#Blue
tooth_firmware_for_the_Arduino_101
Change-Id: I361f124967da277aba835f39294a36718cf990a8
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved the Quark D2000 CRB information from
quark_d2000_crb.rst to the Zephyr wiki.
Change-Id: I62b6970633570c6af2d8d946d5621b032ff10467
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Moved content from arduino_101.rst to Zephyr wiki article
Change-Id: I10d42e28f375bcb5c5c7266e7595b6dd7767ac8b
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Setting CONFIG_ARC_INIT=n in prj.conf make it possible to use same
config for both QEMU and Arduino 101 targets.
Change-Id: Ie4f549d5721f2b87077fba8787f5b1e2a8f07680
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This creates proper links and removes undefined link warnings.
Change-Id: Id8c4cc4279114cab05ed8ad3f7da24f7ce673e8d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When we are specifying some kind of option that we are not
documenting, we shall not use :option:`xx` as it will generate a
warning. Thus, use ``xx`` in its place (or *xx* in others) as needed.
Not all converted, as others make sense to move from xx to CONFIG_xx,
which will be handled separately.
Change-Id: I98d5e70da471184f99bb491b1fa1a3b7086019d2
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Seem embedding a `code-block` in a `note` section is not working that
well.
Change-Id: I6a0ad0b5a17b2fc1cb9968a85dc794c53a1e27ac
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
D2000 is shipped with no ROM, advise on how to install one.
Change-Id: I848bb0b4fa2d6972cc6919d69a11e14dee0ce50c
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The unicode characters for trade mark and register trademark,
although understood by the Atom editor, apparently don't work
here. :-(
Change-Id: Ifbdb25a015630fc90afb18aec6f07a8724fc37f7
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Improve this doc to use register trademark and trademark unicode
symbols.
Further, the make rules can benefit from also being passed the argument
ARCH=arc. I see that some zephyr tests use ARCH to select a prj.conf file.
Change-Id: I0650e5d5aba10aa984ebd0be21d0b381dd96dd56
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The dependencies for the HCI firmware are now part of the latest
stable MyNewt release, so special editing of project.yml is no longer
needed.
Change-Id: Ia3658ab1da03e208cd5230e0cda4c96a4628e8f0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If you pass arduino_101_factory, it expects a directory with that name,
but really the directory arduino_101 contains the factory config.
Change-Id: I12ce11c0e32a9d50998b52c2e2c16780b6ce00da
Signed-off-by: Geoff Gustafson <geoff@linux.intel.com>
Marketing is telling me to switch URLs for the EM Starter Kit
board story.
Change-Id: I342849d1085330eb9e5e88f08374bb5889695702
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Correct the indentation of numbered lists to
appear correctly once render.
Change-Id: Ie1b92a7c5d2517e4f36626858404458c3b461be9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Generate kernel image in Intel Hex format when building for the nRF52.
Remove the additional step from the board doc file.
Change-Id: I619496f64037c2a0ac459ae05e549e01458e0f71
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Board support for the ARC EM Starter Kit provides for a board
that can select one of two SOCs. The EM9D and EM11D commits
will be done separately to expidite review. Also submitted here
is doc/board/em_starterkit.rst to explain details about this
Zephyr board choice.
Change-Id: Icd9fac045c700ad8dcb95161fdd63c130f665778
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fix a few small (mainly rendering) issues with the arduino_101.rst
document:
- A few paragraphs had the wrong indentation
- A sub-list did not appear as such (serial port settings)
- Remove the 'Bibliography' section which appears empty
- Fix IO-3 and IO-5 pin names in note
Change-Id: I60ad839de1901167b6793254186836015502aaab
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Document the process of creating and flashing a MyNewt-based HCI
firmware for the Arduino 101.
Change-Id: Ieb3cf116363777b8cca20dbcc746e4757f47d2ed
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Arduino 101 board in Zephyr now support the original bootloader
and thus supports flashing over DFU. Adapt documentation and remove
reference to alternate bootloader which has been causing issues
and does not support flashing of the bluetooth firmware.
Jira: ZEP-301
Change-Id: I0298d8938bb636319b213909594d8cb42417559a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds documentation file of oliemxino_stm32 to the
supported boards.
Change-Id: Ide6c7767be56d33e8c040a03df13337919a09750
Origin: Original
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Adding documentation for building, flashing, and debugging the Quark
D2000 series CRB.
Change-Id: I3d61d5c8b88b5f74da76262d4fcda823c6f7b9b3
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
We have not found any use-cases for dynamic IRQs where a static
IRQ did not also suffice. Deprecate so that we can eventually
remove from Zephyr and nontrivially decrease the complexity of
the kernel.
Change-Id: I509655371773aeaca7d01134dd850eb4cd95f387
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Anas Nashif