Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add Kinetis SoC family and rename fsl_frdm_k64f to mk64f12.
This will allow adding new SoCs of the same family and the reuse of code
among SoCs of the family and series.
Change-Id: Iea1a663aef7ce0487f147bdd36f668bebe80deb5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make kconfig look the same for all architectures.
JIRA: ZEP-107
Change-Id: Ia8100194ec333fc07a1dff4f6f90364ce8bef4d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The SoC selections for each architecture are moved to the top level
in menuconfig and xconfig. This makes it more intuitive to select
architecture -> SoC -> then board, avoiding an additional trip to
go into the architecture menu to select SoC.
Change-Id: I57a78a09adfc4bb12423915b6ad14ceb74381a2b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The image will be linked at a different address and with different
ROM/RAM sizes to allow running a bootloder image that loads a payload
image. The addresses/sizes depend on if it is a XIP image or not
(CONFIG_XIP), and in the case of a XIP image, if it is a bootloader
image (CONFIG_IS_BOOTLOADER) or not.
In the case of a bootloader, it is given the full ROM and
CONFIG_BOOTLOADER_SRAM_SIZE kB of SRAM. When not a XIP image, it is given
the full SRAM minus CONFIG_BOOTLOADER_SRAM_SIZE kB, and is linked at the
start of SRAM.
Change-Id: Ibbb693c7bff022f313dac40f21c04a61f4bed115
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move platform related data and definition to the platform
directory and include it using:
arch/<arch>/platforms/*/Kconfig.platform
This way we will able to add a platform as a directory of
content without the need to change and Kconfig files.
Platforms can then be included by reference (using repo or
git submodoules)
Change-Id: I6bff4e48490e33cbaf879fe3c424bf2f6a4887ac
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Put architecture option and ARCH_DEFCONFIG on the top
and simplify default options for the architectures.
Change-Id: I4cae73f3e9ec24913e201269ec6dc8eddc2fd7c1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows the serial driver to be excluded from the build.
Change-Id: I74549b058d85bf35acf9d719643139901ae5973e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the serial driver to be excluded from the build.
Change-Id: I1be0ee5bc6817ac03ed23dcc9925cff1b694d584
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Cortex-M related Kconfig menus and options no longer show up at the top
level when "make ARCH=arm menuconfig" is issued. They show up under the
"General Platform Configuration" menu.
Change-Id: I6bf012e628212340f5e089d0193a9a71d90c79b9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates bsp directory as part of transforming BSPs to platforms.
Change-Id: I8b5366bf32797ddbb1bfa3520ddfeed6344cec2f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As a step towards eliminating the ARM's bsp subdirectory (as has already been
done for the x86 arch), the contents of 'arch/arm/bsp/Kconfig' have been merged
into 'arch/arm/Kconfig'.
Change-Id: I813b5c9e19187347147875635deb851a3357dd55
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit sets Execute in Place (XIP) option
as a default for CortexM architectures.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ib9bd361a9ac6c64d9755c6bf3ac5c8df6c1b22f2
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the arch directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I744225ddaa5e2b45113ca049457a8f9925ebe4c2
David B. Kinder