This commit adds driver support for ADC1 on all 8 supported series of
stm32 with resolution and conversion time selection and calibration.
Currently DMA is not supported for all series, and without it, zephyr
won't be able to catch up ADC's end of conversion interrupt, so this
version of the driver supports one channel conversion only. Users want
multi-channel conversion should use multiple sequences in their app
code.
This driver uses LL lib rather than HAL because the current HAL lib for
ADC will call HAL_DMA_* functions rather than using zephyr's common DMA
interface, so that way the driver will break the consistency of the
code.
This driver has been tested on multiple nucleo boards including
NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG and all
passed the test cases in tests/drivers/adc/adc_api. If the external ADC
line is floating, it may fail the tests since ADC may get 0V and the
test cases think 0 is failing. Connect it to any voltage source between
0-3.3V will help passing the test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Since commit 0906a51dac, the driver
fails the test: tests/drivers/adc/adc_api. Some of the workflow
turns out to be incorrect (e.g. not doing dummy conversion after
getting out of deep power down, and not clearing interrupt status
bits). So take some time to overhaul the driver. Also rename
the driver to adc_intel_quark_se_c1000_ss because the inner
working of this driver is tied to Quark SE C1000 SoC.
Fixes: #12632
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Nothing builds this driver and the driver hasn't been updated to the new
ADC api so it does not compile. Remove it sinces its effectively dead
code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds translation layers to make nrfx drivers for the nRF
ADC (nRF51 series) and SAADC (nRF52 series) peripherals accessible via
the Zephyr's API. The SAADC peripheral is accessed using nrfx HAL only
as it turns out that usage of the nrfx driver in this case would be
inconvenient and would unnecessarily complicate the shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit replaces the API for ADC drivers with a reworked one.
As requested in the issue #3980, the adc_enable/adc_disable functions
are removed. Additionaly, some new features are introduced, like:
- asynchronous calls
- configuration of channels
- multi-channel sampling
Common parts of code that are supposed to appear in each implementation
of the driver (like locking, synchronization, triggering of consecutive
samplings) are provided in the "adc_context.h" file to keep consistency
with the SPI driver. Syscalls are no longer present in the API because
the functions starting read requests cannot use them, since they can be
provided with a callback that is executed in the ISR context, and there
is no point in supporting syscalls only for the channels configuration.
"adc_api" test is updated and extended with additional test cases,
with intention to show how the API is supposed to be used.
"adc_simple" test is removed as it does not seem to add much value.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adds a shim layer around the mcux adc16 driver to adapt it to the Zephyr
adc interface.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds common and Kinetis-specific adc device tree properties, and updates
all Kinetis SoC and board dts files to include adc nodes.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The Kconfig assumed that there would only ever be one instance of an
adc, but some Kinetis devices have multiple adc instances.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
Change-Id: I46a156581cdf79d0ba8f0030ce7b595469db1bcb
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Correct an error in ADC Kconfig. The # in the beginning of
the code lines unintentionally commented out the "if" condition.
Jira: ZEP-645
Change-Id: Ieee1bdbf4865fc39aef9a0986036fd81a75e5b58
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Correct ADC resolution definition and default value in Kconfig.
QMSI uses different definition for sensor. But, Kconfig did not
reflect the difference.
Change-Id: I8e57aa5670bff0e5b29bf0772159834e4b902d88
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
ADC driver is now using new system log macros, also update the Kconfig
variable to be a level rather than a bool.
JIRA: ZEP-311
Change-Id: Iac96c37989e44484808ded515397d457186240e0
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I noticed that even though I was building w/o ADC, that some
ADC config symbols were still defined. Adding some "depends on"
to clean that up.
Change-Id: Ie73d131ba1ad63b5f3d920e17b4c7b5a0d785609
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fix naming and use a global driver name for instance.
Change-Id: I30a54cb9c20773e1b6fdc57b934aa564612a6c45
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This moves the kconfig options for each drivers into their own
submenus. This makes menuconfig easier to navigate.
Change-Id: I2bdc8c3b61e424248ffb65385a7eabc797d89684
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Config options 'Clock Radio and 'Serial Delay' appeared out of ADC menu
due to a missing dependency on ADC_QMSI.
Change-Id: Ia1ca0d5a4ea676205a5928689c2adee9e26c2691
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This creates the QMSI ADC driver which is simply a shim driver based
on the ADC driver provided by QMSI BSP.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_ADC=y
CONFIG_ADC_QMSI=y
Optionally this can be set:
CONFIG_ADC_IRQ
CONFIG_ADC_PRI
CONFIG_ADC_QMSI_POLL
CONFIG_ADC_QMSI_INTERRUPT
CONFIG_ADC_QMSI_CALIBRATION
CONFIG_ADC_QMSI_CLOCK_RATIO
CONFIG_ADC_QMSI_SERIAL_DELAY
CONFIG_ADC_QMSI_SAMPLE_WIDTH
Origin of the file: This file has been created from scratch
Change-Id: Ie04776ac2ed88e56852409070edec568974f8e0d
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Part of making the device model work, is using a more generic name for
the devices. Currently the ADC uses 2 possible solutions, when it should
be using just one name for them all.
Change-Id: Id9b78b3edf234391819847bb9b8534747d7d4409
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
There can only be one instance of an ADC, but we have code setup for
multiple.
Change-Id: I94eae2450bdc6b138ebad66f80a7c451cefe32a9
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The ADC for DesignWare is currently setup to handle multiple dev entries,
but there only ever exists one. No reason to add to complexity for multiple
if there is only going to be one.
Change-Id: I0b77ef91160776dcf0aea1a50b144fff2b2be9e2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The numeric code to configure sample width in ADC needs correction.
Change-Id: I6d73db674852650f70178322d949f9b2b49f97af
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
On Curie SoC the ADC must always be configured in single ended mode.
Change-Id: Ie59b4180358153865c961b66f98321db60d4269f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
After exiting a deep power down mode a dummy conversion is required.
Change-Id: I98dad19e168984efe7af6ad360d0cc46e6603736
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
ADC DW IP requires a calibration process each time the
IP recovers from a deep power down mode.
Change-Id: I2e02d1987af9addd9cb08a4e4e8d3848ad5b623c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Use a default priority to avoid Kconfig blocking when priority
is not set in SoC or Board.
Change-Id: I4edda47b955a7ee834f04dc40d0decbd8dee6305
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the Synopsys source code for the arc ADC driver.
Change-Id: I140a63505685cda8ec9d3174b7cf4fc1e2e91b06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Henrik Brix Andersen