* Change emsk to EM Starter Kit
* Fix some typos
* Add more statement for steps of using EM Starter Kit
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Due to support updated from 2.2 to 2.3, a debug script is provided
for emsk, so developer can directly debug the zephyr application
using commands such as follows.
+ make BOARD=em_starterkit debug
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
Here are the main changes:
* board: Update EMSK onboard resources such as Button, Switch and LEDs
+ update soc.h for em7d, em9d, em11d
+ update board.h for em_starterkit board
* arc: Add floating point support and code density support
+ add kconfig configuration
+ add compiler options
+ add register definitions, marcos, assembly codes
+ fixes in existing codes and configurations.
* arc: Update detailed board configurations for cores of emsk 2.3
* script: Provide arc_debugger.sh for debugging em_starterkit board
+ make BOARD=em_starterkit debug
This will start openocd server for emsk, and arc gdb will connect
to this debug server, user can run `continue` command if user just
want to run the application, or other commands if debugging needed.
+ make BOARD=em_starterkit debugserver
This will start an openocd debugger server for emsk, and user can
connect to this debugserver using arc gdb and do what they want to.
+ make BOARD=em_starterkit flash
This will download the zephyr application elf file to emsk,
and run it.
Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
More general spelling fixes, and cleaning up stray UTF-8 characters
such as curly-quotes, em- and en-dashes. Use replacement strings
for |reg| and |trade|.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
OPENOCD_PRE_CMD, OPENOCD_POST_CMD variables require adding
'-c' in front of an actual OpenOCD command. This is in contrary
to other OPENOCD_*_CMD varialbles which specify OpenOCD commands
directly. This patch aligns usage of various OPENOCD_*_CMD variables.
It is no longer required to add '-c' in front of OPENOCD_PRE_CMD,
OPENOCD_POST_CMD variables.
Change-Id: I276fab00b099694c83c3bf74aa5dd59c8d6a308b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Let 'make flash' invoke the dfuutil.sh support script, and
export the relevant DFUUTIL_* environment variables, for all
3 cores of the Arduino 101 board: x86, ARC and BLE.
This is backward compatible with the current usage of OpenOCD
over JTAG, since this is only enabled when the environment
variable ZEPHYR_FLASH_OVER_DFU is set to y.
Change-Id: Ic5528cb87a180378d7120d150c27d1e24c9ebe75
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
The flash memory in arduino 101 pĺatform is connected to the
SPI MST 0 device and the CS is connected to the GPIO 0.
The arduino 101 sensor sub-system core maps the SPI MST 0 device
to the "SPI_2" name and the SPI SS 0 device to the "SPI_0" name.
In the same manner the GPIO 0 is mapped to the "GPIO_2" name and
the GPIO SS 0 is mapped to the "GPIO_0" name.
This commit fixes the SPI device name and the GPIO name used by
the W25QXXDV flash memory.
Jira: ZEP-1672
Change-Id: Ifdd5b664498d0eaa6ad073853b811951fe19ab09
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Use new device name for SPI device
Jira: ZEP-1704
Change-Id: Iec39468bbef54423af2b3a681dd4ae1eee866d1e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes the following warning:
warning: override: reassigning to symbol UART_CONSOLE
Change-Id: I09805bdfa31146faf276ca4ec06487a5d71cdff5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable arc to access the spi controller on I/O fabric.
There are two spi controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the spi controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add spi_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1190
Change-Id: I40a5d423d4b7986a897834d1a3831938005eda6f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
ZEP-1317 records a problem were em_starterkit appears to boot up
EM7d, sometimes, due to a misread of the dip-switches.
This could be a mechanical issue. I am seeing it on my board too,
and I often have to struggle with the dip-switch to get it to boot
EM9D. For automated-testing, perhaps it is better if the default is
EM7D, since this is the all-switches-up and contact in the switch
isn't needed. Meanwhile, I'll work with our board team to try to get
to the bottom of this.
ZEP-1317
Change-Id: I41095c1d8b07ce156cc3856a50196c064af2ee18
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
I notice that many of the other boards here use 1msec for the tick.
I notice also that when switching to unified kernel, scheduling based
on time has a lot more jitter with a 5msec tick.
I think a better default is 1000 ticks per second for em_starterkit.
Change-Id: Icc93345762dbea7d71ca9f4735bcf73f75cde273
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The current ARC GCC compiler used in Zephyr SDK v0.8.2 generates
incorrect code when using the "-fno-omit-frame-pointer" option. This bug
should have been fixed in the 2016.03 release of the compiler.
Jira: ZEP-1243, ZEP-1403
Change-Id: I0901f55973c1ea37491b07bf625d0d1918803f3e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With the driver for AON GPIO available to the ARC side, the user
buttons in the board are usable by both cores.
Change-Id: Ib8e67fba1513caec2e89c31c16f7ed0458c4ed76
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Those defined will be used in sample applications that deal with
on-board LEDs.
Change-Id: Ia447adfd33547e01206a9fd7ceeae420ba806f31
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The value for CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC needs to be set
in the SOC, since each SOC will have a different frequency
on the EM Starterkit. The EM7D, for example, has a 30Mhz CPU clock.
It was already being defined in the SOC, but the board setting
would override the SOC.
Change-Id: I4daf3b94f15bad99c0f3c8674a15ad225aa3d274
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Introduce an architecture sorting of boards. This is to allow for
easier maintenance going forward as the number of boards grows. It
will be easier for any scripts to know the board/arch mapping without
having to maintain an explicit list of what boards are associated with
which arch. We can also do things like have architecture maintainers
cover reviews and branches for arch/${ARCH} and boards/${ARCH} going
forward.
Change-Id: I02e0a30292b31fad58fb5dfab2682ad1c5a7d5a7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Huaqi Fang