Add test for z_early_boot_rand32_get() API.
This also improves the coverage for kernel/init.c
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Introduce TC_RESULT_TO_STR to convert from an integer test result to a
string like "PASS", "FAIL", "SKIP". Do this to remove the defines of
PASS/FAIL/SKIP since those names might get used by other code and to
have a single consistent way of doing the conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When adding the nRF52810, which has 24KB of RAM, some of the tests don't
compile anymore due to lack of SRAM. Address this by either filtering
the test out or reducing the amount of memory allocation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This redirects PRINT() to printf() and not printk() and
was causing stack overflows on some platforms.
Fixes: #8033
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These tests have an enormous stack which can be troublesome
to align on MPU-based systems; just disable user mode on
them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Following tests were failing on a microcontroller with 32KB flash:
benchmark.application
crypto.ecc_dh
crypto.ecc_dsa
test_build_ethernet
test_build_sensors_a_m
The min_flash option has been added in the test case yaml files.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
This test validates random number generator APIs that
is not related to kernel and should not be part of
kernel tests.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
The root cause for this issue was found in
https://github.com/zephyrproject-rtos/zephyr/issues/6470
so this kconfig isn't needed anymore.
This is a partial reversion of 6eef2f14. The actual feature is left
in place, as it's plausibly useful in other contexts (otherwise
assertions enabled by sanitycheck can't be disabled by the app as
they're passed in via CFLAGS).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The mbedtls test is hitting a compiler bug where two subtests will
soft fail on qemu_xtensa when assertions are enabled. This is despite
the fact that:
+ The failure is entirely internal to the mbedtls suite.
+ The mbedtls code does not use zephyr asserts
+ The mbedtls code does not call into zephyr code that might assert.
+ The behavior persists even when an irq_lock() is held across the
entire test, ruling out any asserts in interrupt/exception context.
+ And EVEN WHEN the mbedtls library blobs are bytewise identical
between assert and non-assert cases.
The bug seems to be a layout thing where the mbedtls code behavior
differently based on code address and/or link-time optimizations
(xtensa has a few).
Unfortunately sanitycheck enables assertions by setting CFLAGS
directly and not via kconfig, so we can't fix this by turning the
feature off in an app right now. This patch adds a simple "override"
flag that can be set by apps like this that hit bugs.
Again, note that zephyr assertions are not used nor needed by this one
test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The previous default, "config-threadnet.h", is more or less arbitrary
choice made in a commit 312def2c78 1.5 years ago. In particular,
it's not related to Thread support in Zephyr per se (there was no
such support at that time).
It doesn't make sense to have a default intended for a particular,
not widely used (yet) protocol. Instead, the default should work
out of the box with a contemporary widely deployed arrays of TLS
servers, which are HTTPS server. config-mini-tls1_2.h works with
https://google.com, and by extension, with many other servers on
the Internet.
So, have that as the default, and let applications with special
needs to override that to what they need.
Addresses: #6132
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
mbedTLS include directories will now default to be in the 'app'
include path when mbedTLS has been enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
We are getting warnings when building with native port:
used with length equal to number of elements without multiplication by
element size
This fixes the call of memset.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently Zephyr is running from RAM, and the space where
instructions can be executed from is quite small.once Flash
cache is enabled in ESP32 port we can remove this check.
Signed-off-by: Nishikant Nayak <nishikantax.nayak@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Arguments are not needed and in some cases are being set as unused in
the same function. The test_main function is called from ztest main
routine without any arguments.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have a few systems with small amounts of flash that this test can't
fit into. For now I set the limit right above 32k, however that might
need to get bumped up if we have any systems with flash sizes between
32k and 64k.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The `z` vector was not initialized in the call to
uECC_vli_nativeToBytes(), resulting in undefined behavior. Use the
properly initialized `exp_z` array instead.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- sha256.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- mbedtls.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- hmac_prng.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- hmac.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ecc_dsa.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ecc_dh.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ctr_prng.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ctr_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- cmac_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- ccm_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- cbc_mode.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
- replaced test points with ztest APIs wherever possible
- replaced CONFIG_MAIN_STACK_SIZE with CONFIG_ZTEST_STACKSIZE
in the config file
- split the main file into two files:
- main.c has ztest entry and runs separate functions for ztest
- aes.c has the original routines
JIRA: ZEP-2449
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
These tests have been copied over from TinyCrypt and modified slightly
so that they compile on a non-POSIX system, with a minimal C library:
that's why it doesn't comply with Zephyr's coding style.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When an app uses a construct such as:
obj-y = main.o ../../../../samples/bluetooth/gatt/hrs.o
in its makefile, it causes said object module to be built in the
source tree, not in the object tree.
When building massively parallel, this usually resuls on the files
getting corrupted, leading to bugs such as:
https://jira.zephyrproject.org/browse/ZEP-2316https://jira.zephyrproject.org/browse/ZEP-2317
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:3: warning: NUL character seen; rest of line ignored
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:4: warning: NUL character seen; rest of line ignored
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:5: *** missing separator. Stop.
as multiple build are trying to touch the same file in the source tree
and of course, race and causes a build bug.
We have known about this issue for a long time, but it requires
modifications in the build system that there is no time to tackle.
A suggested workaround is to include the source files into a local .c
file, so this is what this patch does, to remove the random noise.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
We fail to build this test on stm32f3_disco which has 40k of SRAM.
Bump up the min_ram requirement to 48k.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The external mbedTLS library seems to have some issues when DEBUG is
enabled, so disable this here becauase we will not change external 3rd
party code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ramakrishna Pallala