This will guard the driver API to be safe for concurrent
invocation from fibers or tasks.
The machanism is by default disabled. To enable it, the
following flag needs to be defined:
CONFIG_GPIO_QMSI_API_REENTRANCY
Jira: ZEP-441
Change-Id: Ia3ee738aff2f8e70e4f9a7ec76346138ff6f5031
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This will allow the driver API to be safe for concurrent invocation
from fibers and task.
The machanism is by default disabled. To enable it, the following
flag needs to be defined:
CONFIG_GPIO_QMSI_SS_API_REENTRANCY
Jira: ZEP-411
Change-Id: I5b738532f2eefec6d5d78ab6a668790dfe9faaff
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
address was passed to QMSi port read function, even though
value is needed.
Change-Id: I6b923fdc56114936fb4a0c55c923d6b37884e07c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
I notice there are some more places in this file
that can be switched to using tabs.
Change-Id: I7dac2b91f932aa6f167b7eaf93e7c8f571a22d41
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The file gpio_dw_registers.h already had the 4-port GPIO
registers defined, yet the gpio_dw.c implementation didn't
support it properly. There are 4 ports here, not 2, and only
PORTA can support interrupts and debounce.
On the em_starterkit board, for example, PORTA
has 3 bits for buttons: A, L and R. The other 3 ports should not
be used with interrupts & debounce.
I've re-worked this file to derive the port number from the
base address given. The lower 6 bits are divided by 12 to
derive the port number. From this, the registers EXT_PORTA,
EXT_PORTB, EXT_PORTC or EXT_PORTD can be read.
Also, for those ports that don't support interrupts,
set irq_num to 0, and that code will be avoided. I've verified
that I can access GPIO now correctly on the EM Starterkit. The
em_starterkit board support will be submitted soon but I'm
staging in this change first.
Change-Id: I98dbe083e03e046b40e07b4b14a99a39a6d0f0be
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add QMSI 1.1 based GPIO sub-driver for sensor system.
Origin: Original
Change-Id: Ida5565a5911eb55651a11a4ac0b240c624f8e1ca
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Comparing the Synopsys GPIO driver with the one here in Zephyr revealed
that some register symbols are missing. I am adding them now, and will
be working on getting GPIO working on ARC EM Starterkit board.
Change-Id: Ifccd1e225eb1373a31c6a5c51cf3927e42601d1a
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
DEV_* error codes are deprecated and should not be used anymore. This
patch replaces DEV_* occurrences by the corresponding errno.h code,
according to the error code conventions.
Change-Id: I2f38c869b4e00d22145e24375796ba6bf216b084
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Use I2C register access API for writing/reading registers.
Change-Id: Ic35b3e7159f9827f2d202d8cd1ae8f26ee6300f1
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Many sub-systems might require to set a callback on different pins.
Thus enabling it via changing the API.
It is also possible to retrieve private-data in the callback handler
using CONTAINER_OF() macro (include/misc/util.h).
Former API is still available, and is emulated through the new one.
Using both should not be a problem as it's using new API calls.
However, it's now better to start using the new API.
Change-Id: Id16594202905976cc524775d1cd3592b54a84514
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add Kinetis SoC family and rename fsl_frdm_k64f to mk64f12.
This will allow adding new SoCs of the same family and the reuse of code
among SoCs of the family and series.
Change-Id: Iea1a663aef7ce0487f147bdd36f668bebe80deb5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use SOC_SERIES_* for naming SoCs with similar features and architectures
with the goal of code reuse. The Series in the config variable should avoid
name collisions and clearly denote the relationships within an SoC family.
Change-Id: I7a98542f96b5d5dc3acc23782c4d45f98cceb599
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_SOC_FAMILY for the top level SoC family. A family
will have different SoCs or different SoC series with multiple
SoCs.
Adding the Family string to the config variable to avoid confusion
between actual SoCs and families and to prevent name collisions.
Change-Id: Ic99a2c1df7850dee3a45641027af82464dd6fadb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Note that the failure case can only be reached when PCI is enabled.
Otherwise, the if-block is always false, which reduces code size
for non-PCI platforms.
Change-Id: I1f9def66b2ce7f08fc13b8f03e675ce4cd469e6d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the assignment of driver_api to just before
the init function returns. This is in preparation to
make device_get_binding() return NULL if driver
initialization fails.
Change-Id: Ibf08cb107885da7c1037c6e7d207530e1a4708f8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The D2000 CRB is similar to the Arduino 101 (at least as GPIO is
concerned). Add support for using the GPIO controller without QMSI
libraries.
Change-Id: I001da05c9a9d5771b2ec678a9d4a91c44db05289
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib7e0b81b2df1a0225fc244fea3035416d0a4f282
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove those kconfig options that are SoC specific, and
should not be configurable via kconfig.
Change-Id: Ib8158f00a6c6616360ddbcf63981f1a85911c1b9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Current interrupt status tells which pins triggered this interrupt, thus
the handler should acknowledge only these and not all possible, since we
don't know if other gpio controller interrupts are being taken care of
at the same moment.
Change-Id: I7d3f1bb13bb293f7b7ce9b5a717a37bbdd4e4e42
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
The base address and IRQ line are static per SoC, so there is no need
to make them configurable in Kconfig.
Change-Id: Ib78401ff136c29642356f5bda9d6cd3e5c98bece
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added device power management hook infrastructure. Added
DEVICE_INIT_PM and SYS_INIT_PM macros that creates device
structures with the supplied device_ops structure containing
the hooks.
Added example support in gpio_dw driver. Updated the sample
app and tested using LPS and Device Suspend Only policies.
Change-Id: I2fe347f8d8fd1041d8318e02738990deb8c5d68e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Build with GPIO port E failed due to a missing comma.
Change-Id: Ib8fa7f4d03ed4f4c713a3a8a16ad3b37fcf6b0b7
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This moves the STM32 based boards (Nucleo F103RB and STM32 Mini A15) to
the "new" pinmux model.
Change-Id: I190df271a6b83fafeec0b281cd4ee7cf13d7e7db
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This patch fixes gpio_stm32 driver since it was merged with a few
occurrences of DEV_* error code.
Change-Id: I025e4f83d8ca07bc0fed7d3dcb9cce3b9d11c3fc
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Makes K64 gpio driver submenu available only if K64 soc is
selected.
Change-Id: I4097006a4dca718ed2da730fa85cd2ad9970f419
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Moves STM32 gpio driver under its own submenu, like atmel SAM3
and K64 gpio drivers.
Change-Id: Iebc474af9818a73275f99183d3f4788eea1e6ded
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This patch fixes the gpio, i2c and watchdog shim drivers so they set the
CLK_PERIPH_CLK bit during driver initialization. Differently from Quark
SE, the peripheral clock gate bit (CLK_PERIPH_CLK) is not enabled by
default in Quark D2000. We have to explicitly set this bit in order to
properly initialize the device.
This issue has been masked so far because the CLK_PERIPH_CLK bit is set
when UART NS16550 driver is enabled. The UART NS16550 driver is enabled
by default for Quark D2000 so gpio, i2c and watchdog sample apps were
working just fine. But if we disable the NS16550 driver, these samples
applications stop working.
The remaining shim drivers already set the CLK_PERIPH_CLK bit during
initialization so there is no need to fix them.
Change-Id: I3f658da564f87e9d52092ce7aac423c7b3e0c890
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Add support for interrupts for input GPIO pins on STM32 MCUs. The SoC
support code is expected to provide an implementation of
stm32_gpio_enable_int() call.
Change-Id: I61bae54b8e044be4d7d8eb60c0c67b71f8c59553
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
The driver implements a GPIO device interface for STM32 MCUs. Each SoC
must provide implementation of the follwoing calls:
stm32_gpio_flags_to_conf(), stm32_gpio_configure(),
stm32_gpio_set(). Consult gpio_stm32.h header for details on semantics
of these calls.
The driver registers 5 devices, each corresponding to a single GPIO
port. The users can then access individual pins by using values
0-15.
Change-Id: Id236b5b75c9dd091018a50a7be3501c8591cd551
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
() Moves config options for each controllers into their own
Kconfig files. This keeps drivers/gpio/Kconfig from getting
too big.
() Options for each controller are moved under their own
submenus.
() Re-named the device names to standard as "GPIO_0", "GPIO_1",
etc.
() Adds the missing copyright to Kconfig.atmel_sam3.
Origin: refactored from existing file
Change-Id: I7c531b0109ca5a6840d3abd9daa6bc784f15233d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch replaces all occurences of the macro DEV_NOT_CONFIG by
-EPERM at the driver level. This patch is part of the effort to
transition from DEV_* codes to errno.h codes.
Change-Id: I3054c8aa76319a58a2eec089b8a72bf301c85391
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_NO_SUPPORT by
-ENODEV at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I03007527367b03e6fd72a85004b7d3b81046a6a6
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_CONF by
-EINVAL at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: Idae0d5af8dd780416977c9261a5fb6188c3aab64
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_OP by
-ENOTSUP at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I46aec3c65963018c479b01602e4a3eec8650eaff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_FAIL by -EIO
at the driver level. So this patch touch the files under drivers/,
include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I0594ab5dbe667e074c250129e7c13ce512ac940f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Sergio Rodriguez