Disabled bluetooth test for STM32F103RB SOC because there is not
enough RAM space for the test.
Change-Id: I9f097d9201ed659c4970b67f42c570331b92bad8
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Return correct errors for long write.
Change-Id: Idfd54d961db9b2023d05a0dcfa7082d63e9c0261
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This fixes invalid cast from struct bt_gatt_attr to bt_gatt_chrc.
Change-Id: Idc2c016e26b5d38d2d4772a7bd79af8357a4da58
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allows to use LE SC with nimble firmware running on Arduino 101
board.
Change-Id: I3a9a485dc87c367160da98010d0189dfef09d5de
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adding test service makes possible to test Bluetooth PTS test cases
with the shell. Currently long and auth characteristic.
Change-Id: I153efd3f7fa266f93873ef978025faf72c664076
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Returned by flush_value function value should be length of data which
are previously prepared by prepare write requests.
Change-Id: Iacfc63527c68cf20a76a4587acc749bd2d00cffd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch fixes returning invalid offset, invalid attribute length
error. Error should be set during prepare write and returned in
response to execute write request as error response.
Change-Id: I78c57abc5f6f2fbd4a2c0fbb1ee6532212679a36
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds help strings to commands describing what parameters they take:
btshell> help init
init [none]
btshell> help connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: I0b79cb4f2d424f74b0ddb1de7a6d7120e81e2ae3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Support long write maximum 100 bytes.
Change-Id: I071fdf68e29a3d4493c1c60215853cfd8f2ae3c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
BTP API allows to set only advertising and scan response data without
declaring advertising type. Advertising type is deduced from current
flags status. Scan response data is static in tester - to set non
connectable mode in current BTP API scan response length must be
considered.
Change-Id: I742cd8ec774c24f317d639835844a4743bb25445
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some IUTs may have predefined attributes in db which aren't take into
consideration while building via tester database. BTP clients should
know about such attribute handle offset change. After start server
we're sure that none of attributes will be added since zephyr db is
constant.
Change-Id: Ia2c6edaa7a2f3ca4a9c88fe00122c808a529dadb
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add two new test cases to exercise the code in monitor.c.
Change-Id: I66ae70e0d3b61d3b852916333019e1ed2c5c6cf4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch reorganize tester gatt commands to handle also sequence
builded gatt data base
Change-Id: I5fc89c1c498dd2ecf3999bc93e3caffd14f67cb7
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the guidelines for the tester application building usage.
Change-Id: Ibcd31b7bed827f8eee99fdf21d3bb1e8edd24d2e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
For memory-constrained platforms (like the Arduino 101) it's desirable
to be able to build a slimmed-down shell app that doesn't contain any
unnecessary features. This patch makes more of them optional.
Change-Id: Ia7f2cc0930dda6dfed5ce020b56913c6e0bc3d6f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this patch net_buf based heap will be used to store attribute
user_data and UUID. This is the first step to remove gatt_buf.
Change-Id: I578f26b781e01f5f3464c05f7210dc27cdea8edf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Most iuts data base are intended to have its attribute database builded
in sequence and its constant (except attribute values, parameters,
permissions). Patch allows btp specification to cover also devices
which cannot assign an ID right after issuing add attribute command or
set attribute component (which points to defined attribute ID).
Change-Id: Ie8e5ed223609cca2b6e3fb8444065f33b1408142
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to accept or decline incoming pairing that would
otherwise result in JustWorks pairing.
Change-Id: I759ea067ef298b437e0112b8b7ef3bedf106dc52
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to have separate configs as init sample is now
used for different build configuration tests.
Change-Id: I917692f8a8e96345afc561dd04bdcf08cdfa5de7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is needed especially for nble. If bluetooth is not enabled we
cannot send another commands to tester.
Change-Id: I17e639301bba6efd127f2c743b8942c1b493f9da
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For STM32F103RB targets, the SRAM is overflown by 2-3kB in microkernel
test. Platforms with this SoC can still be built for in the nanokernel test.
Change-Id: I012b93cf8dfec74292f7ab228f4b2fca1a4f3444
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array. This
moves ~280 bytes from SRAM to the text section.
Change-Id: Id64ee766e3c6cf7ce4cc623a1e21d3dacf33f050
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Javier B Perez