generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The SRAM address and size are currently available as both
DT_SRAM_{BASE_ADDRESS,SIZE} and as CONFIG_SRAM_{BASE_ADDRESS,SIZE} (via
the Kconfig preprocessor).
Use the CONFIG_SRAM_* versions everywhere, and remove generation of the
DT_SRAM_* versions from gen_defines.py.
The Kconfig symbols currently depend on 'ARC || ARM || NIOS2 || X86'.
Not sure why, so I removed it.
It looks like no configuration files set CONFIG_SRAM_* at the moment, so
another option might be to use the DT_* symbols everywhere instead. Some
Kconfig.defconfig.series files add defaults to them though.
Also improve the help texts for CONFIG_SRAM_* to say that they normally
come from devicetree rather than configuration files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The XCC toolchain may come with Clang front-end depending on
how it's built. Currently, the only SoC/board using XCC is
the intel_s1000_crb and its XCC toolchain comes with Clang
3.9.0 which has a lot better support for C99 and C++11 than
the portion based on GCC 4.2 (which does not even support
C++11). So this change attempts to use the Clang portion
instead of GCC if the Clang executable exists.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
XCC does not seem to handle if(IS_ENABLED()) well which means
XCC would not get rid of code even IS_ENABLED() is false.
In this case, sys_reboot() call in ztest is in this situation
so add a dummy version for ztest only.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During LOG_*() macro expansions, XCC expands everything even though
IS_ENABLED() is used. This resulting in various log*() functions
(e.g. log_0(), log_1(), etc.) being required for linking. However,
when CONFIG_LOG_MINIMAL=y, those functions are not compiled from
the logging subsystem. Therefore, to get past the linking error,
dummy versions are being provided.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The newlib of XCC requires linking to _gettimeofday_r() which
should have been provided by its own C library, but obviously
isn't. So we need to provide a dummy version to get past
the build error.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Newlib in the XCC toolchain for intel_s1000_crb has a few
missing functions which are reentrant versions of the one
defined in lib/libc/newlib/libc-hooks.c. So make these call
the correct functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both HAS_I2C_DW and HAS_SPI_DW are not valid unless I2C and
SPI are both selected. So make them dependent on the parent
subsystem config.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The DT_LP_SRAM_* are aliases to DT_MIMO_SRAM_1_* which
are deprecated, so changing these to DT_INST_1_MMIO_SRAM_*.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When not using XCC, XCHAL_CACHE_MEMCTL_DEFAULT is not defined
which results in some variables not being able to be defined.
So define them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Newlib requires a _heap_sentry so we add it to the linker script,
similar to what other xtensa linker scripts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Commit 2d7460482d missed replacing
the path to xtensa_api.h in the intel_s1000_crb soc.c file.
So update it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Add WDT(0,1) to esp32.dtsi
- Extend the module to be able to use WDT(0,1)
- Some minor refactoring due to usage of device tree
Tests:
- samples/drivers/watchdog
- tests/drivers/watchdog/wdt_basic_api
Note:
- timer module interrupt registers shall be removed when
timer driver implemented.
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
Move _LINKER and _ASMLANGUAGE to target.cmake because of how we pick the
linker script that might be used. This way regardless of how or where a
linker.ld gets included we will always set _LINKER & _ASMLANGUAGE (so
any header that needs check based on those defines they can,
specifically generated_dts_board.h)
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Same deal as in commit 7fdb525754 ("kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), but I hacked Kconfiglib to also
find cases where the type is given separately as e.g.
config FOO
int
default 3
Motivation (from a note in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html):
For a symbol defined in multiple locations (e.g., in a
Kconfig.defconfig file in Zephyr), it is best to only give the
symbol type for the "base" definition of the symbol, and to use
'default' (instead of 'def_<type>' value) for the remaining
definitions. That way, if the base definition of the symbol is
removed, the symbol ends up without a type, which generates a
warning that points to the other definitions. That makes the extra
definitions easier to discover and remove.
It's also nice if 'def_bool' and the like turn into a semi-reliable flag
that the symbol is only defined in Kconfig.defconfig files. That might
be a sign that things could be cleaned up.
Will do a separate pass later to remove some symbols only defined in
Kconfig.defconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Make sure that all sub-sections of .gcc_except_table are mapped in
rodata else C++ builds with exceptions enabled will generate warnings
due to orphan sections.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove the handcoded multi-level IRQ values in device tree. We now are
able to generate the encoded multi-level IRQ value.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This provides an implemention for z_soc_irq_is_enabled()
as it is needed for multi-level interrupts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The spi_dw driver used system clock frequency
as a base for SPI bus frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add dts fixup definitions for low power sram base address and size
- DT_LP_SRAM_BASE
- DT_LP_SRAM_SIZE
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
The i2s_cavs.c driver manipulates cache lines before commencing
any DMA transfers. With write-back cache, if the DMA receive
buffer is not aligned to the cache lines, the data around
the buffer will be invalidated and may never written to memory.
Since the driver takes an external memory slab as buffer and
there is no easy way to force cache line alignment on
the application side, set the cached region to write-through
to avoid potential issue.
Fixes#13223
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The IRQ defined in DTS has already been shifted so there is
no need to shift again in dts_fixup.h.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to fake IDT_BASE address, zephyr_prebuilt.elf is about 1.1GB
in size due to all the empty space between end of SRAM and IDT_BASE.
So move the IDT_BASE to the empty space just after SRAM. The section
will be discarded in the final zephyr.elf so it should not be a big
issue. After this change, zephyr_prebuilt.elf is now a bit smaller
than 5MB.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Previous rename from CONFIG_* to DT_* left a few remaining
CONFIG_*. So rename them manually now.
Fix#13753
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add SOC level macros to flush and invalidate data cache.
Individual drivers can use this macro instead of defining
their own macros.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
This reverts commit c9ace83c89 which
bypasses setting cache attributes.
The previous cache attributes actually set the text/data/etc.
sections to be inaccessible. So fix it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Ulf Magnusson