Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Switch from fiber_start() to k_thread_spawn(). Also switch to
k_yield() from fiber_yield() in the same go.
Change-Id: I2dc480310f981112063651b61b0ceedf38601bee
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes warnings related to the use of nano_delayed_work.
Change-Id: Ie20fb47fc6d5c486ff885ad583354eb715d12c1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Currently the ideal buffer counts for a controller-only build are 6 RX
buffers and 7 TX buffers: ATT_MTU of 158 bytes can be sent in one
connection interval of 6 tx/rx -es wherein connection interval is
7.5ms
Change-Id: I64b4620c5e8e7db8d7ed72fa1db82e266e121f27
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove redundant semicolon from the end of a while loop.
Change-Id: I02cef7879efe0d6eeae59595e14fb1d9b00a6d52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If support for the controller assert handler isn't enabled the
function shouldn't exist.
Change-Id: I72076eb1001980f102a0404c91d22e41582ced25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Don't use a controller define if controller support is not enabled.
Change-Id: I837b3b66f010dfbdf2d9099acd85fa29fce954b7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When building Zephyr in the controller-only configuration,
assertions that happen in the Link Layer code are not visible
to the Host which is running on another HCI and connected via
UART or USB to it. This patch allows the Controller code
to output the assertion line number when in such a configuration,
allowing the Host to view the event to help debugging.
The event format used is temporary and will be replaced by a
standardized Vendor Specific specification to come at a later
time.
Change-Id: I013ca6783a3fdedc47b171132919dd4798c66285
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BBC micro:bit doesn't have UART HW flow control, so it needs to be
disabled to build for the board. The baudrate is also lowered to
115200 since 1Mbps is likely to be unreliable without flow control.
Change-Id: I1725a2a1e46cfbc0f57b4f5c4ee57ff52d9670e9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The convention for Zephyr sample names is to use _ instead of - for
delimiting words.
Change-Id: I08a63e9f600deb38183f81ddb8f8bf407b6eec2e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix minor style issues with excessive whitespace for alignment and
lack of 'static' for the tx_fiber_stack.
Change-Id: I0c761e94e6a6789a3772b08b0774cd1a5e73c2ef
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Right now the hci-uart samples doesn't really work anywhere else than
nRF5x, so make that the default configuration. Also rename the old
prj.conf to generic.conf to give a generic starting point for creating
configurations for other targets.
Change-Id: I1c940339b457d0e77c8ddad4b2474fc7e5b12a51
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In 3 of our UART driver implementations the ISR is exclusively
used and enabled for the RX path. The existing logic was
susceptible to a stall situation where a polled out transmission
would be interrupted by a reception and then the ISR code
would loop forever due to the TX event being signalled (although
the interrupt itself was disabled) causing the ISR to keep
looping for an RX interrupt.
Change-Id: Ic379e58b1c974aca3cee37d2d81f12c3726fb160
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There's no need for this app to use the HCI driver API directly.
Change-Id: Ie5acfbfb09fc3f86c3f29f22fbf7da7db1ff2127
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's important that this configuration stays within the limits of the
Arduino 101 nRF51 (which has only 16kB of RAM, unlike most others that
have 32kB).
Change-Id: I359061f8a41f1373f254c49bff00f551f915bd70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For the current purposes it's enough to build these tests only for the
ARM and x86 qemu targets. This also avoids false-positive failures on
platforms that don't have enough memory.
Change-Id: Icbbfc0603feba6bb1ec8a3054f8cdf0800f49ca1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since net_buf_get() for the avail_acl_tx FIFO is called in
interrupt context (ISR) it cannot wait, and it will fail
immediately returning NULL if it fails to acquire a buffer.
During LE Secure Connections pairing, when there is a fair
amount of packets coming from the host, the FIFO was running
out of buffers causing the packet to be dropped instead of
forwarding it to the controller.
The number allocated now matches the amount of TX buffers
in the controller, so that normal HCI flow control (from
the Host to the Controller) will kick-in preventing any
buffers from being dropped.
Change-Id: Ifad4fbac84ae938eb0e68b73a80a02ba79b6ff6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Whenever the writer of a FIFO is an ISR and the reader a fiber it's
important to make sure that we give the chance for other fibers to run
in case the FIFO keeps getting new data from the ISR without ever
running empty.
Change-Id: I6b40461713d4acfdc6fcec13ff90c9697ff01935
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a config file for boards using the Nordic Semiconductor nRF5x
ICs with reasonable defaults in terms of UART configuration and
controller settings.
Change-Id: Iaa5904c96c0f40a2749b7dda0398dd35fa809f24
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include zephyr.h instead which properly includes nano or unified kernel
headers.
Change-Id: I41c848092d022e2b0737ae6b2b53084eaf9bc6a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Due to the fact that ISRs run at priority 1, the LE_Rand
command was not being rescheduled after CPU sleep to be
able to fill its buffers. By performing all TX (to controller)
work on a fiber, the RNG ISR is able to run and the command
can be executed synchronously in the fiber context.
Change-Id: I3b658e1cab3f80ae655cc88566639a122a361a08
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add short descriptions for what the hci-usb and hci-uart applications.
Change-Id: Ie06cfa1678243e97b49e5594a00086cbf3c343be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new sample application in sample/bluetooth/hci-uart
that acts as a bridge between a UART and the BLE Controller.
It receives commands and ACL data in H4 format over the UART
and passes them on to the BLE Controller to be processed.
It also conversely forwards all events and incoming ACL data
generated by the BLE Controller to the UART.
The application uses the hci_raw interface to pipe the data
to and from the BLE Controller and UART.
Change-Id: Iff7696166a82fe363b2ad4e1abea40103899f927
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes ipss_listen since it does depend on the old network stack it
cause build problems with yaip and anyway its code is only used by ipsp
sample while the net samples does not use ipss_listen at all.
Change-Id: I23987670548741bde8800115d473a3bab242153b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares the way for more controller-side HCI implementations
which can be named hci-<transport>.
Change-Id: I6f82db4b7b7096a122f32def9fe9025a7b811244
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes the UUID 128 bits to use the right byte order so it can be
decoded properly:
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
Length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295)
Change-Id: Ia4aacaf3557d74a248f63cbffb2adb73b076d38c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HID over GATT Profile Specification states:
'The HID Device shall use LE Security Mode 1 and either Security Level
2 or 3.'
Change-Id: I2cfc1d9df76b4e8a8b2be7e87d18a7a5f3a19ea8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a sample that implements HID Service peripheral, the current
descriptor map is for a generic mouse so when connecting to a Linux box
it will create a input device like in the following output:
input: Test HoG mouse as /devices/virtual/misc/uhid/0005:1D6B:0246.0035/input/input98
hid-generic 0005:1D6B:0246.0035: input,hidraw2: BLUETOOTH HID v5.29 Mouse [Test HoG mouse] on XX:XX:XX:XX:XX:XX
Change-Id: Iccf07926ecc7363f4f47e1aa9df506a722e7e2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hedberg