Converted over all STM32F1 based boards to use device tree and removed
associated bits that now come from the device tree for STM32F1. Also
renamed the STM32F10{3,7} SoC dtsi to try and make it clear that the 'X'
is a place holder. Fixedup the top level compatiables in the boards to
be the specific 'X' instead of the generic one.
Boards that are now using devicetree:
* Nucleo f103rb
* STM3210C Eval
* STM32 MINI A15
Change-Id: I29b3634ec7451f974687d55980414efa655e2e96
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Converted over all STM32F4 based boards to use device tree and removed
associated bits that now come from the device tree for STM32F4.
Boards that are now using devicetree:
* 96b_carbon
* nucleo f401re
* nucleo f411re
Change-Id: Ibe197ca0a3f5ad78d594485a578d986403cc824a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updated st/mem.h to support the following SoCs:
CONFIG_SOC_STM32F303XC
CONFIG_SOC_STM32F407XX
CONFIG_SOC_STM32F429XX
Change-Id: I1654c1fd8dc0d1eb471c092777a8fd262465dc51
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a __SIZE_K macro to make things a bit more human readable.
Also fixed up sizes for CONFIG_SOC_STM32F411XE.
Change-Id: I01b8b5f627ad949c2af01ee966428bfabe09e2ee
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commits provides dts files for non ST, STM32 based boards.
Change-Id: Ib324ba418fb27ddbce45a60fbe8e73c7b6896aa4
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit provides dts file for nucleo boards.
For now dtsi files only populates uart nodes so other nodes
are not taken into account into board dts files.
Change-Id: Ide95a8ba3671b91ff0311b7671e77b3bf96db297
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit provides dtsi files for available stm32 base boards.
For now only uart nodes and IRQ number are provided in order to
enable delivery of coherent material.
It also clears additional content from stm32f103xb.dtsi
Change-Id: I62d932c7f22b56e95bcd9566ce39e14a393dd640
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As there can be a large number of FLASH & SRAM sizes for the same SoC
having a dts/dtsi for each one would be extremely painful. Lets just
use some #defines to set that FLASH & SRAM sizes based on the SoC that
is being built.
Change-Id: I06388ada4e49ed3d576da31150288512bb6b4485
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch modifies the DTS file to make the inclusion of the
bluetooth UART port conditional on CONFIG_BLUETOOTH option.
Issue: ZEP-1745
Change-Id: Iea8dc60fe17d131d8e3765e1962b25d157065c67
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In general we should be using hardcoded addresses in the dtsi files
rather than getting ifdef from other places. As the unit address of the
node is typically based on the address in hex w/o the '0x' we can't just
use #defines directly.
Change-Id: I0e17e001151728d16842806d9407e66e6e5129cf
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the SoC dtsi into a vendor dir so as we grow and possibly share
things with other projects we are hopefully in sync (or closer to it).
Change-Id: I71666cff49f9694eee3f5d92dac8aeea416b730a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a system include so that board dts files are able to live in
any location and properly include the things they need.
Change-Id: Icd26433117a4ca9726aeb74eec9f72c6d9df617c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Recommend to drop the generic arm,nvic and just use arm,v{6,7,8}m-nvic.
Remove the yaml and switch to using arm,v6m-nvic or arm,v7m-nvic in the
various places.
Change-Id: Ide55d558d38ab247ee6d9a8d3d0a7f21b9c859bd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As part of the transition to Device Tree, a temporary
HAS_DTS configuration variable, and a .fixup file per board
with symbol aliases were added.
This patch removes the cc32xx related fixup file
definitions, except for those used additionally outside
the cc32xx drivers.
Since cc32xx has DTS files, and since HAS_DTS will always be true,
it also removes the 'if !HAS_DTS' blocks from the cc32xx Kconfig
files.
Change-Id: I1c1b9f734795f523342f82ab32f2a38983812c0b
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As per new binding for arm,nvic, rename the 'num-irq-prio-bits' property
to 'arm,num-irq-priority-bits'.
Change-Id: I2182a905de340e134c67ac4aabe926fbb47c0d5a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reworking the ARM NVIC binding and cleaning it up. Towards this
introduce a new compatibility for this new binding. So we rename
arm,armv{6,7}-nvic to arm,v{6,7}-nvic (for new binding). We also just
use the bit more generic arm,nvic in device tree files.
Change-Id: I5a2c45313ed94619d9268f2c035dacbc8acded29
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move back to getting the number of IRQs from Kconfig. We do this
because the number of IRQs should really just be determined by scanning
the device tree and figuring out the highest IRQ value used.
Change-Id: I8e0dbec1d9d036d4e899b237c4dc7d833c422e18
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than having a zephyr specific property we will encode the IRQ
priority as part of the interrupt property for ARM NVIC based interrupt
controllers.
Change-Id: I7d1489f0bffa7a6369f0622f748bb70dc83fa0cd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds the base DTS files required to support DTS for the
STM32F103xB based Olimexino STM32 board.
Origin: Original
Change-Id: I2a20d3f3ce8b1d3c20fe92b2ffa584c69fbd96a5
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Only the IRQ prasing was using cell_prefix and cell_string does the same
thing so lets just use that everywhere.
Change-Id: I2ef9b1e2c1baef54b71d811c835b29a9ca8fe81b
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move SRAM and flash nodes out of stm32l476.dtsi
RAM and Flash sizes depend on last letter ("G" in the case).
Hence it must be defined out of soc description file
Update information for leds
Change-Id: I980129c44c335322ddbe57252a7001296094c7cb
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds the UART ports required by for Bluetooth. Baud rate
was moved from the Kinetis dtsi file to the relevant board files.
Jira: ZEP-1745
Change-Id: Iac4f748fd82217662800dbf48baea087e5d3a1df
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the base DTS support for the KW41Z Freedom board. The
initial set of changes include SRAM, FLASH, IRQ controller and LPUART
support.
Change-Id: Ic68c4959ddad0c5cfe70d5576a0e58372b93ec9d
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
This patch adds DTS support to the ARM CMSDK UART driver. The DTS
currently specifies the IRQ, IRQ PRIO, and base address of the port.
Change-Id: I8e5bc81c013958be4297d563495bf126b53a83a9
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the base DTS support for the V2M Beetle board. The
initial set of changes include SRAM, FLASH, and IRQ controller support.
Change-Id: I06685622b9c57ac358544c71350074ce06e3371e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds device tree support to the STM32 UART driver. The base
address, interrupt, and interrupt priority values can now come from DTS.
Change-Id: I3c383da8b200037601ecb2dc087f99ef103761bb
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the base DTS and yaml files required to support DTS
for the STM32L476 based Nucleo board.
Change-Id: Ic606a895a25f27d2990f651d0f3c3c5d84818cfd
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the necessary DTS, YAML, and Makefile changes necessary
to generate proper include information for the CC3200. The initial
base support includes SRAM, FLASH, and UART devices.
Change-Id: I8ef8c24c3915198dbb5cfeb2431aa6dc68267d0e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support for the Hexiwear K64 platform. This
includes enabling the DTS config option and adding conditionals around
the options to be replaced.
In addition, a DTS file is provided that customizes the Kinetis
platform to match the hexiwear board. A fixup file is provided to map
the generated information to the current client driver usage. This
file is temporary.
Change-Id: I247d538c6e13e0d1d4141fee74046575a7d2972e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support for the FRDM_K64F board. The defconfig
enables the DTS usage and the FRDM K64F specific DTS file provides the
differences from the base Kinetis DTS definitions.
A fixup file is provided to map the generated configuration information
to the driver consumers. The fixup file will be removed once the
drivers are modified to handle the newly generated information.
Change-Id: Ib0ada28faff6a30e8b40eba5c5853e9018ae5fcb
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds DTS support and related files for the NXP Kinetis
platform. The DTS files contain the base definitions for the hardware
nodes on Kinetis platforms. The YAML files provide the definitions of
the contents of the DTS nodes.
The Kconfig changes were put in place to allow for the conversion of
existing drivers. Once those drivers are modified, the Kconfig options
that are replaced by the DTS information will be removed.
Change-Id: If110fffa99c0b12471cf2df206da6687277e4756
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the base DTS and YAML files that may be referenced by
SoCs. The device tree files provide base definitions for the more well
known ARMV7M device nodes. These files are meant to be included in
SoC vendor specific device tree files.
The YAML files provide definitions for the contents of device tree node
that contain information that will be parsed and used for configuration
in the system.
DTS files define hardware and software configuration and YAML files
provide the markers for knowing which pieces need to be extracted.
Change-Id: I7e90fe19f09afb269b7b2988c2c19c0f26d7ee7c
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Kumar Gala