For x86, TSC is being used to gather timing information. However,
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC is not the same as TSC
frequency when HPET (or other) timer is used. So use the system
clock to calibrate the TSC frequency so we can use it to
calculate timing information.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Currently, the Cortex-M SysTick-based timing info implementation is
incorrectly specified for all 32-bit ARM architectures.
This commit fixes that by restricting the SysTick-based implementation
to the ARM Cortex-M architectures only; in addition, it removes the
ARM64 timing info implementation as it is identical to the default
generic implementation and was previously added only as a workaround
for the aforementioned problem.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The timer counter for ticks on MEC1501 SoC is based on the RTOS
timer which runs at 32kHz. This is too slow for timing benchmarks
as most cases can be finished within one or two ticks. Since
the SoC has higher frequency timers running at 48MHz, add
the necessary bits to use these for timing benchmarks.
Fix#23414
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
To be able to pass the unit test we need to add a set of defines for the
ARM64 architecture. Fix this.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The regular version of this test has CONFIG_MP_NUM_CPUS=1,
but this was omitted in the userspace version, and I am
seeing crashes on an SMP-enabled target that supports
user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Parse output of test to verify success, this was previously treated as a
test and now it is using the console handler, so we need to verify
success using regex.
Fixes: #20177
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Global variables related to timing information have been
renamed to be prefixed with z_arch, with naming arranged
in increasing order of specificity.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Disabling SMP mode for certain tests was a one-release thing, done to
avoid having to triage every test independently (MANY are not
SMP-safe), and with the knowledge that it was probably hiding bugs in
the kernel.
Turn it on pervasively. Tests are treated with a combination of
flagging specific cases as "1cpu" where we have short-running tests
that can be independently run in an otherwise SMP environment, and via
setting CONFIG_MP_NUM_CPUS=1 where that's not possible (which still
runs the full SMP kernel config, but with only one CPU available).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In all architectures, except x86, __start_swap_time is directly
updated by function read_timer_start_of_swap(), and it shall not
be registered via __temp_start_swap_time.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The results were incorrect because the timer was firing the
interrupts before the measurement was made.
Fixes: GH-14556
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
(Chunk 1 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's worth using custom timing information on a few systems to save
cycles or gain precision. But make the use of k_cycle_get_32() a
proper default instead of hardcoding all the platforms and failing to
build on new ones. On Xtensa and RISC-V (and now x86_64) the cycle
informatoin from that call is a very fast wrapper around the native
counters anyway -- all you would save would be the function call
overhead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
I was pretty careful, but these snuck in. Most of them are due to
overbroad string replacements in comments. The pull request is very
large, and I'm too lazy to find exactly where to back-merge all of
these.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that the API has been fixed up, replace the existing timeout queue
with a much smaller version. The basic algorithm is unchanged:
timeouts are stored in a sorted dlist with each node nolding a delta
time from the previous node in the list; the announce call just walks
this list pulling off the heads as needed. Advantages:
* Properly spinlocked and SMP-aware. The earlier timer implementation
relied on only CPU 0 doing timeout work, and on an irq_lock() being
taken before entry (something that was violated in a few spots).
Now any CPU can wake up for an event (or all of them) and everything
works correctly.
* The *_thread_timeout() API is now expressible as a clean wrapping
(just one liners) around the lower-level interface based on function
pointer callbacks. As a result the timeout objects no longer need
to store backpointers to the thread and wait_q and have shrunk by
33%.
* MUCH smaller, to the tune of hundreds of lines of code removed.
* Future proof, in that all operations on the queue are now fronted by
just two entry points (_add_timeout() and z_clock_announce()) which
can easily be augmented with fancier data structures.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In NRF52 we need to write to a capture register to retrieve the current
counter value. This was missing for userspace implementation.
Fixes: GH-9676
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from riscv32 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from nios2 based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from xtensa based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Discard selected measurements that occur immediately before and
after the timer interrupt occurs. This causes fluctuations in the
time measured.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support needed to get timing related
information from ARC based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Daniel Leung