Removes duplicate code and inconsistencies in the naming of the
cc13xx_cc26xx devicetree and RTC driver hierarchy and alignes it with
the actual TI product series naming hierarchy.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
On nRF5340 net core it was observed that when `wfi` instruction was
followed by `pop {r0, lr}` in the `arch_cpu_idle` function,
the value of `lr` sometimes got read as 0 from memory despite
having correct value stored in the memory.
This commit inserts additional `nop` instruction after waking up
to delay access to the memory.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Reuse existing MCUX-based shim driver for LPUART that is compatible with
the hardware block in S32K344. DMA is not yet supported.
Use the board's debug connector (P6 / LPUART2) as default console.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Unify the pinctrl_soc.h header for all the NXP S32 family by using
the HAL macros that expose the features supported on specific
devices. This approach still need a different binding for each device to
expose in DT different properties and allowed values.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Introduce minimal power initialization for NXP S32 SoCs and allow to
reset the SoC through the sys_reboot() API.
Presently only S32K3 SoCs is supported but it can be extended later to
other NXP S32 SoCs, hence it's placed in a common directory.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The S32K3 MCUs are 32-bit Arm Cortex-M7-based microcontrollers with a
focus on automotive and industrial applications. The S32K344 features
a lock-step core, internal flash, RAM and TCM with ECC.
Co-authored-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Co-authored-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
NMI_INIT() is now a no-op, so remove it from all SoC code. Also remove
the irq lock/unlock pattern as it was likely a cause of copy&paste when
NMI_INIT() was called.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This patch sets ENET2 ref clock to be generated by External OSC
ENET2 ref clock direction as output
ENET2 ref clk frequency to 50MHz
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
The Zephyr linker scripts have inconsistent ordering of various chunks of
data which lands in RAM at runtime. This leads to the value of _end not
being consistently defined as the maximum address of static variables used
in the application.
Create a helper linker fragment, zephyr/linker/ram-end.ld, which can be
included after the last possible definition of RAM data, that consistently
sets _image_ram_end, _end and z_mapped_end.
Signed-off-by: Keith Packard <keithp@keithp.com>
After exiting D3 state if IMR context save is enabled, IDC interrupt
must be re-enabled again for all cores.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
The ifdefs in in dmic headers is getting out of control and makes
maintainence very ddifficult, especially when having to maintain out of
tree SoCs sharing the same data and information.
Keep header clean and per SoC and share some common registers in one
place instead avoiding confusion and making it easier to read and
maintain.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Where the bottom is the only one which interacts with
the host operating system.
And the top the only one that interacts or is aware
of the hosted operating system (Zephyr).
The bottom uses the native simulator CPU
start/stop emulation.
By now we replicate its code as a provisional measure,
until the native simulator becomes standard.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Where the bottom is the only one which interacts with
the host operating system, and does not necessarily
need to know about the Zephyr OS.
This is in preparation for the native simulator,
which which the bottom is also fully Zephy agnostic.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
A known issue exists that does not allow a CC13/26x2R device to
establish a link to a CC13/26x2P device unless the capacitor array is
tuned to a non-default value in the P device.
See SimpleLink(TM) cc13xx_cc26xx SDK 6.20+ Release Notes, Known Issues.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The native_tasks logic is unrelated to the remaining
of the soc logic (which handles CPU start/stopping)
refactor it out into its own file.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's remove the native_posix part from the SOC description
and just refer to "native".
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The native_tasks header requires the toolchain header.
Let's include it directly instead of requiring users
of this header to include it before.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When CONFIG_PM_DEVICE is enabled IPC Device may be during power transition
during a call to intel_adsp_ipc_send_message function.
Changed signatures of intel_adsp_ipc_send_message and its sync version
to return int and negative error codes on error.
On attempt to send IPC message during Device power transition
-ESHUTDOWN error code is returned, on busy state -EBUSY.
Updated all function references.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
When option CONFIG_PM_DEVICE is enabled, IPC driver is capable
of entering D3 power state described as PM_DEVICE_ACTION_SUSPEND
(and leaving that state - powering back to PM_DEVICE_ACTION_ACTIVE).
New power control callbacks 'ipc_power_control_api' are introduced for
use during power state transisions. They allow Zephyr application
specific code to be executed.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Exiting idle state requires to reinitialize all memory window
instances to flush the cached memory.
Added function that calls initialization of devices during runtime.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Generic header for system clock allows to define a sys_clock_idle_exit
function for the clock implementation.
Implemented the function in the intel_adsp_timer to reinitialize
device driver after the idle exit state.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Provides a way to use pinctrl to allow internal loopback
on a peripheral pin for testing purposes.
This is done by using output-enable on a input pin and
input-enable on a output pin.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
All Cortex-M processors can support RTT by default. This change enables
RTT support for the cc13xx/cc26xx SoC series (tested in hardware on
CC1352R).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add Nuvoton numaker series clock controller support, including:
1. Do system clock initialization in z_arm_platform_init().
2. Support peripheral clock control API equivalent to BSP
CLK_EnableModuleClock()/CLK_SetModuleClock().
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Added a new function to check whether a clock source is supported by a
platform and to retrieve its frequency.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
The word cpu was added to the names of functions, structs, types
and definitions to disambiguate the names and make room in the namespace
for soc clock control functions.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Add simple mechanism to load the image from IMR memory. Basically we are
only setting a flag in power off for the next boot to jump to existing
image in IMR.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Florian Grandel