There could be cases where the destroy callback needs more
fine-grained control of step ordering than "1. destroy, 2. put back to
free FIFO". One case could be when the the pool needs to be protected
by a microkernel mutex or semaphore. In such a case the putting back
to the FIFO may need to happen before a custom action in the destroy
callback.
Making the destroy callback responsible for returning to the free FIFO
gives full flexibility regarding the order of the cleanup actions.
Change-Id: Ib9532d1dd70e0a2042af54ebd3e40a853dd42d33
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
l2cap_chan_le_recv and related code should only be compiled if
CONFIG_BLUETOOTH_L2CAP_DYNAMIC_CHANNEL is defined.
Change-Id: Ia83e2010cdf251afc0a5cbf24b54173926de84c5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix format of bt_l2cap_server_register documentation.
Change-Id: I22322a235bb1d6b6752bfe13ce8e305481649125
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If we fail to send an HCI command to the HCI driver we should give back the
semaphore that counts available commands.
Change-Id: I4aedf662c8b96d57ebafeb471deeb911c5f8ac7a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If we fail to send an ACL packet to the HCI driver we should give back
the semaphore that counts available buffers on the controller side.
Change-Id: Ibad4039d24bcd49fe40b1f87608e1ad4c0248251
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need at least 2 buffers in each direction in case of fragmentation,
and there's no need to have such a low maximum count.
Change-Id: Ie25f4ebb231176a855e9651cb896fa8b59279629
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These make the code more readable when it comes to encoding and
decoding ACL handle values.
Change-Id: Ibd1972d6001c6c0c55428300f839b288dff1ce52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Disconnect command is special since it is also used for cancelling
outgoing connection. Due to this is might be called with default_conn
set to NULL. To avoid conditional unref always pick extra reference
from default_conn for local use.
Change-Id: I59ad583becbf39a71366069d0307aa44f2c64174
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The previous implementation mistakenly kept outputting the first
character of the string endlessly.
Change-Id: I299c627a52158218be8e88c952935edb87a636fe
Suggested-by: Tom Yeon <tom.yeon@windriver.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Somehow through the process of enabling Galileo, we have partially lost
the functionality needed to enable I2C1. Bringing back the I2C
configuration options for I2C1 to the DW IP block.
Change-Id: I296bd9c3d167969df5b2fe17627633f5ec4b1ba4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
__unused is define in sys/cdefs.h when building against newlib.
Change-Id: I0fad81dc91e1eb91368b5b3370e3fbb0fb7ba4a9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Such controller offers 2 blocks (respectivelly Core Well and Resume
Well) on Quark x1000, with 2 and 6 GPIO pins to use.
Change-Id: I50075f0880bef4574e9eeb1c65602082e8da647a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such controller is found in legacy bridge on Intel's platforms. Such as
Poulsbo or Quark x1000.
Change-Id: I30f205f1e73aaa680092e92717fdacbb74046fa3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now make use of sys_io_clear_bit and sys_io_set_bit
Change-Id: I11ebcd8c31d2a4c6d3dac37a0eca0ffcfacead61
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A tiny fix where the pin is the bit position, not its mask.
Change-Id: I4ed8c4b2968ff28b407cab88903351bafe6501ba
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
I/O ports are not memory and thus such asm instruction cannot follow
such constraint. Plus, usual BT* instruction can be used on normal
registers.
Change-Id: Ie3aad668173962a0a90e7cb11231c7843836d412
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let the compiler decide about the registers to use, depending on which
functions those are called from (as they might be already in use or
not).
Change-Id: I00afa0f82c740c8ea70133d85ab67e9cb117187d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We already had this kconfig defined as hex for arc. Make it
readable and change the variable to hex to comply with what
we had already.
Change-Id: Ib8bc72f27d1b97ba2c886201ec29fb13aa4fa429
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is done from the kernel fragments, no need to declare it here.
(micro kernel is the default anyways)
Change-Id: I88511c03f44538cab3e8fbf8292e179e01005b0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was removed as part of some Diab cleanup, however it is needed
and without the definition we get the following when building
for the FRDM-K64F board:
arm-none-eabi-ld: warning: cannot find entry symbol __start; not setting start address
Change-Id: Ie0604a600b6f7a4faa321c58aa63c5617a163107
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The documentation just needs to be swapped for isr_sem_give() and
fiber_sem_give().
Change-Id: I8e51dc63f6d567ade2fe52d63404dcdf1b9de968
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit fixes the nanokernel sample of the kernel event logger
that shows the event messages for context switch and interrupt events.
Change-Id: I4e972adb06b81f2f548bbabe8cd6577af633001c
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
We're smart, we can look up the vector IDs in a book if we
don't already know what they are.
Change-Id: Iaff3986d7c96dea597be4b2a5b13721ab57980fa
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove prototype support for C++ constructors, since it is not well
designed. Device drivers (or other application code) that requires an
automatic initialization capability should use the device initialization
macros instead.
Note: Support for C++ constructors may be re-introduced at a later date.
However, a number of issues need to be settled, such as when the
constructors are invoked and what context they run in. (Running them
during nanokernel initialization, as was previously done, is probably
not the right approach.)
Change-Id: If6d27ac16b485cb39d5ec34084e9d0f1991074f4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the logic in the routine k20_uart_fifo_read() so that it reads the
data from UART if the status register 1 indicates that data is available.
Change-Id: I1722b013e05c7477587c07f5a0b90c753ba34aab
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Since commit 3d7b21b69e the 'priority' parameter is used by the macro
IRQ_CONNECT_STATIC. This patch fixes the macro documentation which
says it is ignored.
Change-Id: I56eec49466a33441fa1822af78956ebb7f5c24ce
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
exclude Minute-IA platforms from tests that enable CONFIG_FLOAT.
Change-Id: Id186857403cb73d009b6e9e126c4e240f95dbf1a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When config_whitelist is used in a testcase that has extra
arguments, those were not set correctly and the test case build would
fail in some cases.
Change-Id: Idb8a4f07d29beefe62de932afa7cc0986e8dd1d4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unused, uses IRQ17, which conflicts with UART1.
Change-Id: I5d285ee8a2e7e5d45b38a85a417bd36f0e4bb92e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The ADC implementation requires that the kconfig option NANO_TIMEOUTS be
enabled as it uses the routine fiber_delayed_start().
Change-Id: Iec49fec4badd3fcf173a2d2cc9d2924299190150
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Changed behavior of duty cycle to have the signal ON time as the
duty percentage instead off the off time. Note however, this requires
that the off time is controlled. The behavior seems to be inverse of
what the user will expect on the header IO.
Change-Id: I1e7abf0324509de375d545a0215fd1edf2283814
Work-by: Johan Kruger <johan.kruger@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As the system always operates in ring 0, neither the SS nor ESP registers
are pushed onto the stack when an exception or an interrupt occurs.
However, as the ESP field is still relevant to debugging fatal errors, a
place has been carved for it in the NANO_ESF.
Change-Id: Ibb2578c69fa6365fd6e9dbf7b51f461063dadc68
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As page fault exceptions can not occur in the system as it is currently
designed, there is no need to track the CR2 register as part of the
exception stack frame.
Change-Id: I75d7a74c5d2c6efcc0e9141d2662861bc2052629
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The -no-reboot flag causes QEMU to exit when trying to reboot through
the RST_CNT register.
Change-Id: I01262753587d2fc4e787262a8368ddba39fdeaa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Implementation of the sys_arch_reboot() call for galileo, using the
RST_CNT register (I/O port 0xcf9).
Change-Id: I00fbf4aaaf746f640674da6880e1d6c5aa230e06
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the REBOOT kconfig option, along with the sys_reboot() API.
This infrastructure is not enough to actually perform a reboot.
Architecture/platform code must be provided as well, in the form of a
sys_arch_reboot() function.
Change-Id: I5b2b15855ff06453f2764f3e3b3b7d6a4a078723
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It can be used by some subsystems even in a microkernel.
Change-Id: I07241aab94ecf67c94dce2d05f2cd774b2a6b044
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename them to SYSTEM_CLOCK_DISABLE and sys_clock_disable to put
the symbols in the proper namespace and to align with the rest of
the timer APIs.
Change-Id: I341cdb1bd6cc01e5662d8526c293d4e0acd6ec24
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Arkadiusz Lichwa