Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
We had those options defined per BSP. Moving them
to a more generic place makes more sense. In this case
they are moved under serial drivers.
Change-Id: I8faf31321fc433eaa168bf36f2b590a6b8402f9e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Renaming the CONFIGRUE_UART_PORT macro to UART_PORT_CONFIGURE.
Done to better align with the current naming process, but also to
remove some possible confusion over the macros source now that
the tree has moved over to Kconfig/Kbuild options.
Change-Id: I1a7691d09818c3d529de346e7fa347ce5ac19aed
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
UART on Quark platfor, according to Quark BSP Programmer's
Reference Manual, is located in the following order on PCI bus:
COM2 BAR0: 16550 registers
BAR1: DMA registers
COM1 BAR0: 16550 registers
BAR1: DMA registers
So, the driver on Quark platform has to specify BAR (Base
Address Registers) number, the pci_bus_scan() function looks for.
As long as UART is a concole device, calling pci_show() during
it's initialization does not make any output.
Change-Id: I2261fbcc8f9e3ebc22d5307fdcbb18cb649c1224
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This commit standardize the Kconfig inclusion.
Selective sourcing of Kconfig files create conflict when merging
different configuration files (.config files).
Instead, now each kconfig symbols is dependant of its specific
DRV_* driver ksymbol.
Change-Id: I3d20d108a83f00d34067dc334758fd57e51feecf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adaptes the Kbuild system to the change of location of
the header files for drivers.
Old location: driver/
New location: include/driver/
Change-Id: Ic49d373149ee44d781419c5c68e59408c8ef1c11
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefiles that describe the object-bundles
for the drivers directory and every subdirectory below.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id77cff9cf0ab51827acc2aef32cbed3ec3ad586b
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the drivers directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I924835ece11a3d597e77a55ace21d724dd5ddbe5
UART is configured statically into the driver directly and not anymore
in the board's system.c. Thus limiting the information to be scattered
into 2 files instead of 3. Then in future, it will also be possible to
remove driver specific informations from the generic UART API structure.
Change-Id: I001f2a6834df9a41ab395a80e4e39b347d545db3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now for x86 platforms, UART is configured statically or dynamically into
the driver and not anymore in the board's system.c. Thus limiting the
information to be scattered into 2 files instead of 3. Then in future,
it will also be possible to remove driver specific informations from the
generic UART API structure.
Change-Id: I7b7fa37f10f88316a4d375c99de3bbacf152a3e3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove camel case style on baseAddr, changing it into base.
Change-Id: Iea1e2d204a38912f4157cc6776a88640e29a04f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using "which" is somehow awkward to use when 'port', on the contrary, is
blatantly more readable.
Change-Id: I355c6e09d7c27b4b07ab6cd10b772a632855516b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using "which" is somehow awkward to use when 'port', on the contrary, is
blatantly more readable.
Change-Id: Id4d3786a192a650ca042024521b94e557a3ec7e8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Rename UART_HOSTDRV_INTERRUPT_DRIVEN option to
UART_INTERRUPT_DRIVEN removing old definition.
Change-Id: Id48288db42e97a1ecbd809e259f33359d5a7c9d7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adding a line after variable declaration in order to comply with
the defined coding style.
Change-Id: Id41af88404bd37227bfd59a2d71ce08d0d6ce005
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Peter Mitsis