These interrupts are for ISRs that need the lowest possible latency.
They do not take parameters and are installed directly in the interrupt
vector table.
Issue: ZEP-1038
Change-Id: I7583e9191dd32d9253ad933181d2103a6e191dea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Document building now copies files from the boards/ and samples/
folders into the doc/ folder, but didn't delete these copies after
the build. Remove the copied folders after the docs are built and
include removing these folders in the make clean actions.
Jira: ZEP-1650
Change-Id: Id5f04a53f0d865bd4211138a35852ac8ab115239
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The Initialization section contains two errors:
1. bt_enable() is the public API for initializing the stack, not
bt_init().
2. When bt_enable() is passed a function pointer, initialization
happens asynchronously, not synchronously.
Fix these.
Change-Id: If02a6d6fe82f546b5cb6f9fdf76c6641baa6cac8
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Updated main menuconfig image
Jira: ZEP-1434
Change-Id: Ib78f65868e025a45d51f1561f7e487eda0d7dbcd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
All mandatory and most of optional PTS tests are passing.
The only not supported optional tests are sending of Test,
RPN and RLS which is not required at the moment.
Change-Id: I5a92d30c0d44803baf6c705d86f2272e4e57fd18
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Add SENSOR_CHAN_*_XYZ enum values to be used instead of
SENSOR_CHAN_*_ANY, because the new naming takes into account that
they are used to fetch all the 3 axes for a channel (X, Y and Z)
and not just any number of them.
Also deprecate old SENSOR_CHAN_*_ANY enum values.
Change-Id: I59e9901c1f8879d084bdb7c95583c2b28aa1e025
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Current version of IP stack supports both IPv4 and IPv6 at the same time.
Use 'threads' instead of 'fibers' in documentation.
Jira: ZEP-1623
Change-Id: Ib8210f32775ac55fe2c346cd81ed263ffe472b28
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Update line numbers for included example code to reflect changes in the
source files.
Change-Id: Iceeed0a8b6df91746cf58d23fe09a03713a07d98
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updated the README.rst describing how to setup the document building
tools on an Ubuntu system (listing versions of tools) and how to
generate a local copy of the html documentation.
Change-Id: I4ca1a99a48709b2313c479487abf42480c5af035
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
make build process less verbose and enable 'make htmldocs' from the top
tree without a need for ZEPHYR_GCC_VARIANT to be defined.
Change-Id: I385667e3d240205913fa806b7481d5ed4e83fbc4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Running documentation scripts on the top directory shifted all links one
level dowwn and is breaking all incoming links.
Use a script to copy all RST files into the doc/ directory before
running sphinx and keep structure intact.
Jira: ZEP-1579
Change-Id: Iccff068430e2ddb29e172cd8ae920475815d199e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove the type field from the sensor value structure. All values will
have the type previously defined by SENSOR_VALUE_TYPE_INT_PLUS_MICRO.
This simplifies the interface, as apps will know what value type to
expect. Apps that prefer to use double values can optain them using the
sensor_value_to_double function.
Change-Id: I3588d74258030eb16c3f89d8eead13cca4606b18
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Renames the Kinetis SDK (ksdk) to the MCUXpresso SDK (mcux) to reflect
the recent rebranding by NXP to include support for LPC and i.MX SoCs.
Temporarily leaves the config option HAS_KSDK to allow renaming each
shim driver in a separate commit.
Change-Id: I738f3687755fcd429a105e723fa25f1da815b519
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
select is more intuitive and easy to remember, and it is shorter too :)
Change-Id: Icc79e5cb88163344c1e2fcf65e313c33c4afa2cc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Re-add board documentation and integrate into the project online
documentation.
Setup sphinx to pick any new board documentation added to boards/*.
Change-Id: Id208d5ef923f8806135879dd33a55ed527dc5f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow inclusion of documentation files that exist outside of
doc/ and will make it possible to add rst files across the tree,
especially for boards, samples and tests.
Change-Id: I7afcf92d99f504b2bc0b2b7e3452acb2f8e08294
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the documentation you can now reference issues in JIRA using the
following macro:
:jira:`ZEP-308`
This will link to the JIRA in the macro.
Change-Id: I3785d4abd243f5c5b75e9e3b58a449e2a3225415
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce random device API analgous to other device driver classes in
Zephyr. Modify the the KSDK random driver to implement the API.
We retain the sys_rand32_get() interface for now on the assumption it
will eventually relocate to or be otherwise replaced by an entropy
management system.
The existing TEST_RANDOM_GENERATOR related drivers that do not
generate entropy are not modified to expose this driver API since they
cannot generate entropy.
Change-Id: I60b2d5afddf242e802a1d9014c99579870fb7472
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Instead of including the rtd theme in zephyr use an installed instance,
if nothing is installed, use the default zephyr theme.
Change-Id: Ife4bd878e3f879cf59ecf2bc5d186a531a3bf1b6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Merge build system and application primer into one and put
all in one file to make it easier to follow.
Jira: ZEP-686
Change-Id: I64ec7ef7a6aa2ad80496ca0ee3ddc3d7fe09a5d7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is obsolete and not available anymore in the unified kernel.
Change-Id: I39f6afd5285a2286fe954bd8dc501f888d0d9003
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add GCCARMEMB_TOOLCHAIN_PATH and ZEPHYR_GCC_VARIANT to
getting_started.rst per ZEP-1027
Change-Id: Ia73697c66562e02a6d93afdac6cc92e327189abe
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Andrew Boie