While trying out the hello_world sample built for QEMU, I was expecting
the sample app to exit and I'd return to a command prompt. Nope. You
need to exit QEMU manually, so add that step to the sample instructions.
Looking around, there are more uses of QEMU like this that could use
this added step after running the sample app.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Not a whole ton to say at the high level: many of the changes have
been discussed in notes for drivers and other subsystems.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
There are a few non-PNG (JPEG and WebP) files that are being
name as PNG files. This causes pdflatex/latexmk to fail due
to them not actually being PNG files. So rename those files
with correct extensions and update the RST files.
Also converted the WebP file in JPEG as PDFLatex cannot parse
WebP image.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Extended case for testing deletion of the first entry while
it is the most recent one.
This extension allow to reproduce issue #18813 and shows that
the bugfix works well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Make sure that the last entry added is deleted correctly by storing the
fact that one was found in a local variable.
Fix by Laczen JMS <laczenjms@gmail.com>
Fixes#18813.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'child: bus:' should be in the binding for the bus node, and
'parent: bus:' in the binding for devices that appear on the bus.
The description accidentally swapped them. Fix it.
Fixes: #18821
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix handling of Rx-ed PDU on termination, do not process
Rx-ed control PDUs and release the PDU buffer back to the
free pool.
Without this fix, Rx-ed control PDU was responded with a
Tx PDU, which did not get acknowledged or released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The code in question is very non-trivial so without good explanation
it takes a lot of time to realize what's done there and why
it still works in the end.
Here I'm trying to save a couple of man-days for the next developers
who's going to touch that piece of code.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The usdhc driver was incorrectly post-decrementing a do/while loop
iterator, causing an extra iteration of the loop and an out-of-bounds
array access. Change the iterator to decrement within the loop instead.
Tested samples/subsys/fs/fat_fs on the mimxrt1050_evk board.
Coverity-CID: 203403
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Make the capitalization consistent with that used in k_object_alloc(),
and fix a copy/paste error in k_object_access_revoke()'s docstring.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a table summarizing the key characteristics of each
of the data passing objects.
It is useful for readers to have an overview they can skim without
having to read each section in detail.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Splitting these up by area helps make the sidebar a bit easier to
navigate, and will also let us insert additional overview information
about each area.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Endianness bug fix in bt_uuid_create function.
Replaced bt_uuid_create_le with bt_uuid_create which
handles both UUID from air and internal varaiable.
Fixed bug with endianess in case of big endian targets.
Signed-off-by: Akshatha Harishchandra <akhr@oticon.com>
The LwM2M implementation for DNS resolving has checks which
configure hints based on whether IPv4 or IPv6 are enabled.
Neither of them need enabled if using NET_SOCKETS_OFFLOAD,
which then causes an error to be returned to due to
"hints.ai_family" not being set.
Also the offload API need to know when to free the allocated
"struct addrinfo" instead of calling free() generically,
thus let's use the freeaddrinfo() API for sockets which will
call into the offload API if needed.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18765
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
When an opcode doesn't have a handle that doesn't mean it is unknown
just that it will not be handle as it could have been disabled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
SMP shall be considered internal TX notify callbacks so they are
allowed to be run from TX thread context like the others.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When CONFIG_BT_GATT_CLIENT is not set att_op_get_type would return
unkown operation instead of properly return the opcode.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since bt_l2cap_create_pdu can return NULL when used under syswq context
the code should always check its result, this also changes the timeout
to have a specific value (RTX maximum timeout) so signalling PDUs still
wait for a buffer to become available.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In certain cases there could be no buffer available which may lead to
NULL being returned by bt_l2cap_create_pdu so instead use
bt_l2cap_create_pdu_timeout to wait with a specific timeout.
Note that this should also ensure the SMP will not be waiting for a
buffer when the remote might have timed out already.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_conn_create_pdu_timeout function which can be used
to provide a timeout when allocating a buffer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a summary of 2.0 doc changes, and fix a misspelling.
Also, add the 2.0 release notes to the index page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This file was added after the mass status 'ok'->'okay' rename. This
rectifies the situation, in particular as 'ok' is not ok anymore.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
With CONFIG_POSIX_API enabled, these samples now build under Zephyr
with exactly the same source as e.g. Linux (or in general, other POSIX
systems). However, building without CONFIG_POSIX_API (i.e. with
CONFIG_NET_SOCKETS_POSIX_NAMES aux option) is retained for now.
Add testcase definitions to build these samples with CONFIG_POSIX_API
in CI.
Fixes: #17353
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add a simple diagram on the device driver model.
Instead of saying "this device driver", spell out that the note
is for the random number generator driver, as the visual
presentation does not have clear distinction.
Also update some formatting.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add 'Shield' to the header to help distinguish the FRDM-KW41Z general
board docs from the shield docs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the firmware_pull mechansim sends the callback to notify the
sample of a new firmware block, the user supplied buffer can be
smaller than the CoAP BLOCK_SIZE setting. To handle this case,
we loop through the payload and fill the user supplied buffer with
smaller chunks.
Unfortunately, the last_block calculation is done outside this loop
which causes several callbacks (while in this loop) to have
last_block true. Let's fix this by adding a small check to make
sure we're at the end of the current payload block before notifying
the user of a last_block.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16158
Signed-off-by: Michael Scott <mike@foundries.io>
If mDNS is enabled, then do the mDNS query always. Earlier we did
the query after we had received response to the normal DNS query.
Also there is no need to print DNS id for mDNS queries as the id
is always 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mDNS packet receive had issues:
* The DNS id needs to be 0 for both sending and receiving, we did
not accepted 0 incoming id.
* The mDNS response does not have any questions in it so we just
need to skip the question count checks in response.
* Skip the Cache-Flush bit in Class field so that we can properly
parse CLASS_IN value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In DNS server init, print information whether the DNS server
is mDNS or LLMNR one. This way we do not need to remember what
IP addresses are used either of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The source UDP port in all Multicast DNS responses MUST be 5353
as described in RFC 6762 chapter 6.
Fixes#18732
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Increase the length of the request buffer.
Current value is not enough for an average
device descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Mitigate the check of the request buffer length because
the host may not know the real length for some responds.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
this case isn't designed for SMP, setting CONFIG_MP_NUM_CPUS=1 to
run the full SMP kernel config, but with only one CPU available.
Fixes: #12478.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
The MSI PLL mode has been disabled but can be used since LSE is
populated on disco_l475_iot1 board. This is requested to enable
USB device controller support.
Fixes#18717
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
If a stack is declared with K_THREAD_STACK_EXTERN first, analyze array
in elf_helper.py will ignore this declaration which will be referenced
by the actual instances via the tag DW_AT_specification, so that this
stack can't be detected by the kernel object detection mechanism, and
this will cause userspace not work.
Fixes: #16760.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
As we have re-worked the test code, and the test-case can run
on Cortex-M platforms on any available and implemented NVIC
IRQ lines, we do not need to exclude these ARM boards anymore.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-works the test for the ARM architecture,
so that it can work with any available NVIC IRQ, not
bound to use the last 2 NVIC lines. It makes use of
the dynamic IRQ feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit makes it possible to infer Z_ARCH_EXCEPT()
calls in SVCs that escalate to HardFault due to being
invoked from priority level equal or higher to the
interrupt priority level of the SVC Handler.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
West v0.6.1 has been released. The main feature is that "west update"
now avoids communicating with the network by default when project
revisions have already been fetched.
This allows for offline operation and significantly speeds up the
command (it's 10 times faster on my machine and home network).
There are other miscellaneous changes as well; document them also.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
David B. Kinder