Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Avoid having to remove quotes wherever the platform name is used
by exporting the variable only once.
Change-Id: I4cb51901e4ac19d70d0310fe6bbacd157f586661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add comment regarding the use of GAS when using clang, and remove
duplication of setting -Wa,--divide, which is needed for all toolchains.
Change-Id: Iab7257b038d1f4142c37a6c6c5979ef28f78a655
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Move the files that *know* about the calling convention in use by the
compiler. The routines exposed by the files moved to the i386_sysV_abi
directory follow the C calling convention specified by the
i386_sysV_abi which is the default for GCC. The upstream GCC has been
enhanced to support the iamcu_ABI that is optimized for processors
that implement the IA MCU instruction set. This new ABI provides code,
data and stack size improvements on IA MCU based systems.
This change is the first step in adding support for the IA MCU
optimized toolchains to Zephyr OS
Change-Id: I13bffee8007fb3f82aa31389b2c241065e8e315d
Original-work-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When building for a certain platform, we have no idea
what architecture we are building for.
We used to specify the architecture alongside the board or platform
name and this was used to find the defconfig in arch/<arch>/configs.
By putting all board configurations we support in one place we do
not have to specify the architecture, just the configuration name.
Change-Id: Ib7e9f63b9a8051714dc207f583fd26ef620497d8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on host architecture and use architecture definition
from the defconfig file of the board.
Change-Id: Idb3dd42524f26bd167a34d6eb024d4d9816e9730
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not reference every platform, instead use the platform
name to tell make what to build.
Change-Id: I7498da7cdcdada754466222902f59fe4c6487d89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move platform related data and definition to the platform
directory and include it using:
arch/<arch>/platforms/*/Kconfig.platform
This way we will able to add a platform as a directory of
content without the need to change and Kconfig files.
Platforms can then be included by reference (using repo or
git submodules and does not need to be part of the zephyr
project)
Change-Id: I5e71f5394c22edb346f7d61d9448b8e1c68e1f9b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Provide the proper irq for i2c, gpio and spi. And make relevant drivers
getting enabled easily once their domain is selected.
Change-Id: Ib8a428e11b6163a1b370b23baa34ea2fab733565
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Without that, it won't built when enabling support for dw i2c in
quark_se-x86.
Change-Id: Icce26488d870c273516dc9f34555176122bcb9c8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Build the actual driver when relevant
- Provide the IOAPIC stub
- Provide the IRQ flags for IRQ_CONNECT_STATIC
- Set the default IRQ priorities
Change-Id: Iea20ef67c92cf7f48791fba5a8021448b7059950
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The Intel Quark microcontroller D2000, is a low power, battery-operated,
32-bit microcontroller. Within its small footprint, the Intel Quark
microcontroller D2000 includes an Intel Quark ultra-low-power core
running at 32 MHz, with 32k integrated flash and 8k OTP SRAM.
Change-Id: I6ba121996edb0b5fbe596bd6ef3d6e3979ff73e9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This module is based on the standard Local APIC and IO APIC source modules.
This modules combines these modules into one source module that exports the
same APIs defined by the Local APIC and IO APIC header modules. These
routine have been adapted for the Quark D2000 Interrupt Controller which has
a cutdown implementation of the Local APIC & IO APIC register sets.
Change-Id: Ic80aa78918483663d76054ebadefa08d8a3f188a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This cause problems with some configurations using hex.
Change-Id: I680c40d46e1fdf3da714f6412c8dda0e1ebb44f9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Keep things consistent across all platforms and make this
configurable and avoid hardcoding in linker.cmd file.
Change-Id: Iddeb5107854139249fda70378e07b83066d8a7a1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver should handle the initialization instead of relying on
platform initialization. This is to conform to the driver model.
Change-Id: Idc95d59bce2470b5118e416ee05f07548991a15c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When PCI bus is not enumerated, I/O memory and IRQ
numbers need to be statically initialized.
Change-Id: I4efcccd95d8048910f6c900c8daf46cbe3a5fa00
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Not supported in LLVM/clang. As it turns out,
this new implementation is 4 bytes shorter than its
predecessor.
Change-Id: I1f63b7a245dafcfc5a6dadc293875f00d02b997c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix a few spots where building with with clang fails.
Change-Id: I621c7cb8daf119bf89ad512168d70e1c9b67e53f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clang support already existed in the Makefiles but was not complete
and some gcc options did not work with clang. Move those to be conditional
on the compiler used to make clang work.
To build with clang for x86:
make CC=clang -C samples/microkernel/apps/hello_world/
You still need the gcc cross environment for various tools.
For now, only x86 was tested.
Change-Id: Ic5aeab4f80d312e1d1312a4a9fc885a43f760270
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Such controller offers 2 blocks (respectivelly Core Well and Resume
Well) on Quark x1000, with 2 and 6 GPIO pins to use.
Change-Id: I50075f0880bef4574e9eeb1c65602082e8da647a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We already had this kconfig defined as hex for arc. Make it
readable and change the variable to hex to comply with what
we had already.
Change-Id: Ib8bc72f27d1b97ba2c886201ec29fb13aa4fa429
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We're smart, we can look up the vector IDs in a book if we
don't already know what they are.
Change-Id: Iaff3986d7c96dea597be4b2a5b13721ab57980fa
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unused, uses IRQ17, which conflicts with UART1.
Change-Id: I5d285ee8a2e7e5d45b38a85a417bd36f0e4bb92e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
As the system always operates in ring 0, neither the SS nor ESP registers
are pushed onto the stack when an exception or an interrupt occurs.
However, as the ESP field is still relevant to debugging fatal errors, a
place has been carved for it in the NANO_ESF.
Change-Id: Ibb2578c69fa6365fd6e9dbf7b51f461063dadc68
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As page fault exceptions can not occur in the system as it is currently
designed, there is no need to track the CR2 register as part of the
exception stack frame.
Change-Id: I75d7a74c5d2c6efcc0e9141d2662861bc2052629
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The -no-reboot flag causes QEMU to exit when trying to reboot through
the RST_CNT register.
Change-Id: I01262753587d2fc4e787262a8368ddba39fdeaa1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Implementation of the sys_arch_reboot() call for galileo, using the
RST_CNT register (I/O port 0xcf9).
Change-Id: I00fbf4aaaf746f640674da6880e1d6c5aa230e06
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
CONFIG_RAM_SIZE
CONFIG_ROM_SIZE
Available to x86 based platform configurations.
Change-Id: I3dda770a9063e3c717023b1a83761f32caa2c590
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Eliminates issues with compilers that have different C calling
conventions.
Change-Id: I9318edd5eea6b6bacdf3da2c28e0e29315d5cdf5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Eliminates issues with compilers that expect different C
calling conventions.
Change-Id: Ic70a15926380671a7b9c058b53400b10b5c870a7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This doesn't make any assumptions on calling conventions or
the structure of the stack, and should thus be portable to
compilers that implement different C calling conventions.
In order for the rewritten functions to take up the same code
size as the pure-asm counterparts, -fomit-frame-pointer has
been specified for each of them, otherwise an extra 4 bytes
is used for every function.
The generated assembly code by these new functions has been
verified in GDB to be the same as the old ones, except a few
trivial things like particular registers used.
Change-Id: I9a896cbfc3e7f4c2497d749140729d28b32f1c9d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was only needed on legacy platforms which are no longer
supported.
Change-Id: I4a3312f3698c4fc8bbf0df4610af7b69a9056f80
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This had bit-rotted to the point where it was breaking the build
and was only needed on legacy platforms that are no longer
supported.
Change-Id: I4fcfc38bacac58761fba475701e0c27d7b8b7a27
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This option is not building and currently not supported, removing
it because there does not seem to be a use case for it.
Change-Id: Idb8ffedf83f43cffc68a01573c6f2d1a90fc40fb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 58fd0778c6dcc6bd3148b5d07615cd7bd777f456.
Change-Id: Ibffe036d2e182652b3c966c10ed405c9386f823c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We are interested in supporting some XIP x86 platforms which are
unable to fetch CPU instructions from system RAM. This requires
refactoring our dynamic IRQ/exc code which currently synthesizes
assembly language instructions to create IRQ stubs on-the-fly.
Instead, a new approach is taken. Given that the configuration at
build time specifies the number of required stubs, use this
to generate a build time a set of tiny stub functions which simply
push a 'stub id' and then call common dynamic interrupt code.
The handler function and handler argument is saved in a table keyed by
this stub id.
CONFIG_EOI_HANDLER_SUPPORTED removed, the code hasn't been conditionally
compiled for some time and in all cases we call _loapic_eoi() when
finished with an interrupt.
Some other out-of-date verbiage in comments related to supporting
non-APIC removed.
Previously, when dynamic exceptions were created a pointer would
be passed in by the caller reserving ram for the stub code. Since
this is no longer feasible, two new Kconfig options have been added.
CONFIG_NUM_DYNAMIC_EXC_STUBS and CONFIG_NUM_DYNAMIC_EXC_NO_ERR_STUBS
control how many stubs are created for exceptions that push
an error code, and no error code, respectively.
SW Interrupts are no longer triggered by "int <vector>" hard-coded
assembly instructions. Instead this is done by sending a self-directed
inter-processor interrupt from the LOAPIC, using a new API
loapic_int_vect_trigger(). In this way we get rid of dynamically
generated code in irq_test_common.h.
All interrupts call _loapic_eoi() when finished, since this is now
the right thing to do for all IRQs, including SW interrupts.
_irq_handler_set() for x86 no longer requires the old function pointer
to be supplied.
Change-Id: I78993d3d00dd153c9051c518b417cce8d3acee9e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Clang support already existed in the Makefiles but was not complete
and some gcc options did not work with clang. Move those to be conditional
on the compiler used to make clang work.
To build with clang for x86:
make CC=clang -C samples/microkernel/apps/hello_world/
You still need the gcc cross environment for various tools.
For now, only x86 was tested.
Change-Id: I1a50c3a82d79ff3001beb4366961ca810eeb6006
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to have a name according to the functionality of the feature.
This commit rename any text, function and variable related with the
Profiler name to Event logger.
Change-Id: I4f612cbc7c37965c35a64f06cc3ce5e3249d90e5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Detect the presence of CLFLUSH instruction and cache line size at
runtime. It is still possible to set them manually via kconfig options
if the values are known.
Change-Id: I00bda1de4c5c241826ead6f43b887b99a963cc7b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removing many of the typedefs that are only used once to lessen the
checkpatch warning about creating new typedefs. A handful have been
behind as they would require a more invasive change to the code. It
has yet to be determined if this is a worthwhile endavour.
Change-Id: Ibeb29e0a1d37e8121218fccf0d986cbebd226e85
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Dmitriy Korovkin