As Renesas Hal is not compatitble with C++98 we use
filter CONFIG_HAS_RENESAS_RA_FSP to skip the test
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
The interval and latency for a CIG are set for each direction now,
allowing applications to use e.g. 10ms for sink ASEs and 7.5ms for
source ASEs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The max window time of RaspberryPi Pico WDT is 8,388,607 us(0x7FFFFF),
But 20,000ms have been set.
Correcting the value to 8,000ms to pass the test.
This was a problem that was discovered because the fix in
ccedcd1ac0 now properly handles the error.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
The nrf7002dk board's wifi chip requires blobs to build wifi driver.
Therefore it can not be built by CI. Exclude the board and its
variants from the wifi test suite.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Up to now there was only support for parsing/encoding 32-bit integer
numbers, with no support for larger ones.
Introduce support for 'int64_t' type, so that large numbers can be
serialized into JSON payloads.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add pwm configuration for frdm_ke17z and frdm_ke17z512 boards.
Set the alias of pwm-0 to ftm2 and test the pwm_api sample.
Update the ftm and pwt configuration to test pwm_loopback sample.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Increase the counter timer prescaler for some instances of NXP System
Timer Module, so that late alarms and short relative alarms are
excercised.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add a test that verifies no resources are leaked when re-assembling L2CAP
PDUs over an unreliable channel (ie. lots of disconnects).
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Today the thread analyzer depends on !ARCH_POSIX,
so this filter needs to filter any board for this architecture
not just native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update i2c_emul.c to support i2c_target_register and i2c_target_unregister
function calls as well as support address forwarding in emulation.
Address forwarding helps us test IPCs in native sim. Instead of having to
emulate 2 separate cores, we can forward read/write requests from one bus
to another bus (effectively creating a loop). This way the same image can
simulate both the controller and the target.
Signed-off-by: Yuval Peress <peress@google.com>
Packet buffer is designed to run writer and reader code on two CPUs.
The write function cannot be preempted by the read function in a CPU,
or the cache management could result in data corruption. In the tests,
the reader and the writer are executed on a single CPU. Disable data
cache management to prevent potential data corruption.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The MQTT publisher/subscriber/pubsub tests suites are currently
depending on an external MQTT broker being available. In result, the
test suites cannot be executed in twister and need to be run manually,
which makes them kind of pointless from the CI perspective.
This commit reworks the tests, so that they no longer rely on an
external broker being available, but rather implement minimalistic
broker functionality for test purposes only. This will make the tests
self contained, and thus executable in the CI.
Since it makes not point to duplicate the effort between the test
suites, the test suites have been merged into a single mqtt_client test
suite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently existing tests suites verify MQTT 3.1.1 functionality,
therefore group them together under "mqtt/v3_1_1" directory, so
that the test base can be extended easily in the future with MQTT 5.0
tests without collision.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add spi configurations of NXP frdm_ke17z and frdm_ke17z512 boards,
tested spi_loopback sample for lpspi drivers.
Update the "HAS_MCUX_*" kconfig to "DT_HAS_*" in testcase.yaml
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
This overlay is no longer needed, as presently there are more test
scenarios covering all combinations of DMA and SPY_ASYNC support for
LPSPI peripheral.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
qemu_riscv32e uses a different ISA and is kinda special, add it
to the testcase for better coverage.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add an opaque pointer to store upper layer private data and initialize
it with the USB device context during controller initialization. Use the
pointer in event processing to get the correct context.
Fixes commit 48f2a4bc1a
("usb: device_next: remove initialized state checks in event processing")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Enable 'chan_blen_transfer' and 'loop_transfer' tests for MAX32670EVKIT.
Co-authored-by: Maureen Helm <maureen.helm@analog.com>
Signed-off-by: Mert Ekren <mert.ekren@analog.com>
For commonly-accessible I2C nodes, status and pinctrl are now set in
board dts. Remove these properties from test overlay files.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
The test `storage.flash_map.mpu` for `nrf52840dk/nrf52840` fails
althought the output is correct. Time to test execution is not enough.
This change extend test execution timeout.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
[Description]
Device hang is observed when LE Scan
[Root Cause]
For le_ext_adv_report, Data[i] of one adv report is 0-229,
for the adv_buf of saving, it just is 73 bytes, so sometimes
the bytes of adv report is more than the adv_buf, resulted hang
[Fix]
consider the le ext adv case.
[Testing]
After modified, Device hang is not observed after stress
testing with LE Scan
Signed-off-by: Guotao Zhang <guotao.zhang@nxp.com>
Moved helper methods from tests/boot/with_mcumgr to pytest-harness
package. It can be reused by other tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Setting SOURCES before calling find_package() was deprecated in #51049.
Cleanup usage of SOURCES and instead use the proper target_sources()
CMake function.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #73831
find_package(Zephyr) should be called before first project() call.
Zephyr package will test and force-set the correct toolchain, especially
the C compiler.
The project() will also set the C compiler, if not set already.
If project() is called first, then conflict arises on the C compiler
selection and thus the following message is seen:
> You have changed variables that require your cache to be deleted.
> Configure will be re-run and you may have to reset some variables.
> The following variables have changed:
> CMAKE_C_COMPILER= /usr/bin/gcc
This cache deletion results in other errors, such as a missing BOARD
setting.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Duy Nguyen